Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed in a display box with full instructions. Contains: 1 x U-Gauge1 x Hand Bellows Pump1 x 1/2in BSP Nipple Cap1 x 1in BSP Nipple Cap1 x Y-Piece3 x 600mm lengths of Rubber Hose

Easyslice kit of 2 pipe cutters and handles Pipe size: 15 22mm

Test Nipples screw into gas meters to enable connection to a gas test gauge. The hexagon screw shuts off supply to the gauge.1/8in. BSP thread.

The Monument 1730X Orange Hose for Gas Test Gauges. Rubber Hose ID: 5.5mm food quality, Length: 2m. Colour: Orange

Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions. For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Monument Stiffnuts Professional Boxed Kit. 1/2-inch. and 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube and full instructions.

This Monument spare rubber hose is for use with U gauges. They have a coil length of 2m and an internal diameter of 7/32in (5.5mm). Specifications: Colour: Black.Length: 2m (78in) (coil).

Monument MON1728 Autocut Copper Pipe Cutter. Size: 28mm.

The Monument MON1727 1727N Autocut Pipe Cutter comes in the following:Size: 27.4mm.

The Monument Autocut Twin Pack contains the following: 1715C: Size: 15mm.1722Y: Size: 22mm Not for use on stainless steel. Spare wheel to fit is available MON269.

Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.

The Monument 170 Stiffnuts, 27 x 32mm, Kit has been especially designed for removing stiff backnuts from awkwardly placed taps, and to make tap installation a more rapid process.This tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts.Ideal for 24mm A/F, 25mm A/F, 26mm A/F and ribbed, 27mm A/F, 29mm A/F ribbed, A/F 32mm. It comes complete with 3/8-inch cordless drill adaptor and a full user instruction manual. Specifications: Capacity: 1/2in 3/4in.Pack Quantity: 6 Pieces.

The Monument MON15R suit 15PC Automatic Pipe Cutter and 1715 pipe cutters.

Monument Automatic Copper Pipe Cutter. Size: 15 mm. Ratchet handle available (Code:- MON15R.)

The Monument 1515U Water Flow Weir Gauge is designed to measure water flow rates in order to determine if suitable flow is available in a building prior to the plumbing installation of washing machines, boilers, showers etc. This type of water flow gauge is also used for diagnosing if a combi boiler or water heater may need de-scaling. The water flow gauge is made from durable plastic with a stainless steel mesh strainer to avoid turbulence. It features a dual scale to measure flow rates of 2 to 25 litres and 1 to 5 gallons per minute.

Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has an easy to read triple scale bar in psi and kPa scales and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems. Can be left on test, while flooring is laid to reveal any nail damage. It can also test hot and cold supplies separately to ensure pipes are not crossed. The Monument 1512 is fitted with a Schrader Valve and 15 mm push-fit fitting for quick and easy assembly and has a rubber boot for added protection.

The Monument 1470F Smoke Emitter Pellets give off a dense white low-toxic smoke when ignited. They have a burn time of 60 seconds and have an approximate volume of 15m³.They are used for testing flues, chimneys, fans etc and come supplied in a pack of 10. Specification: Smoke Colour: White.Pack Quantity: 10.

This Monument 1469B Mini Snake Barbed Drain Unclogger quickly unclogs sinks, showers, bath drains, bathtubs, and laundry tubs.There is no need to remove the rose. Specifications: Size: 10mm.Length: 75cm.

This Monument 1461 Micro Yellow Plunger is ideal for clearing small hand basins. This 100mm diameter plunger has a compact design for ease of storage. It is for use on bathroom and kitchen sinks. Specifications:Colour: Yellow.Cup Size: 100mm (4in).

Monument one-piece Plunger, in black, for clearing sinks, basins, and bath wastes is both handy and popular. Exclusively patented bellows design allows more cubic centimetre displacement than traditional force cups. Specifications: Size: 100mm (4in).Length: 325mm (13in).

This plunger is ideal for bath and sink waste pipes. Size: 125mm (5 in).

1 x Monument 1458T Large Force Cup Plunger 120mm (4.3/4in)

1 x Monument 1457Q Medium Force Cup Plunger 100mm (4in)

1 x Monument 1456N Small Force Cup Plunger 75mm (3in)

This Monument Suction Plunger is ideal for clearing WC pan wastes and gullies. It is made from soft, flexible rubber and has a wooden T-handle. Rubber Diameter: 140mm (5.1/2in)Overall Length: 445mm (17.1/2in)

The Monument Hydro-jet Pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets, and drains. First you fill the unit with water then hold the unit over the waste and pump down (or hit) the handle to create a powerful water jet to help clear any blockage. To clean the MON1452 simply just flush with clean water. Comes with 3 adaptors for sinks, drains and toilets. Size: 35cm x 7cm x 7cm.

The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following: Length: 1m.Internal Diameter: 10mm.

This Monument 138R Copper Pipe Jointer has the following specification: Pipe Diameters: 15mm and 22mmPipe Thickness: 0.7mm and 0.9mm

Monument 1379 Testing Plug. Size: 150mm (6 in).Capable of sealing against pressures of up to 1.62 bar / 24 psi.

Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.

The Monument MON1377 1377W Drain Testing Plug comes with the following specifications:Size: 75mm (3 inch).Capable of sealing against pressures of up to 2.24 bar / 33 psi.

Diameter range: 48-62mm. Maximum allowable back pressure: 37psi (2.50bar).1/2 in BSP outlet.

Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).

This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plugs.2 x 1371E 22mm Test Plugs.2 x 1372H 28mm Test Plugs. The plugs are used for blocking off small pipes such as copper pipes for dry testing prior to commissioning, however they cannot be used for air testing purposes by themselves.

The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by themselves. 2 Plugs supplied: 1 x 1370B 15mm Test Plug. 1 x 1371E 22mm Test Plug.

Monument 133C Socket Forming Tool. Size: 22mm.

Monument 131W Socket Forming Tool. Size: 15mm.

This Monument pump is for use on Schrader valves, and they are used for inflating flexible plugs and universal flexible plugs which are fitted with a Schrader valve. Note: inflate flexible plugs slowly, stop inflating when seal is achieved.

This Monument AC4P Autocut Plastic Pipe Cutter is suitable for 28mm plastic plumbing pipe.

Monument 1279 Black replacement hose to fit gas test gauges, are 1m in length, and have an internal diameter of 7/32 in (5.5mm). Note: Do not use this hose for LPG (Liquified Petroleum Gas).

This Monument 1277s is a replacement hose to fit gas test gauges. It has an internal diameter of 7/32 in (5.5mm). They are black nitrile for standard and are 1m in length (Coil). NOTE: Do not use this hose for LPG (low pressure gas).

This Monument AC4P Autocut Plastic Pipe Cutter is suitable for 22mm plastic plumbing pipe.

This Monument AC4P Autocut Plastic Waste Pipe Cutter is suitable for 2in Push Fit and Solvent Weld waste pipe. Whilst nominally called 2in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 50mm I.D. inner diameter to 56mm O.D. outer diameter.

This Monument AC4P Autocut Plastic Pipe Cutter is suitable for 15mm plastic plumbing pipe.

This Monument AC4P Autocut Plastic Waste Pipe Cutter is suitable for 1.1/4in Push Fit and Solvent Weld waste pipe. Whilst nominally called 1.1/4in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 30mm I.D. inner diameter to 36mm O.D. outer diameter.

This Monument AC4P Autocut Plastic Waste Pipe Cutter is suitable for 1.1/2in Push Fit and Solvent Weld waste pipe. Whilst nominally called 1.1/2in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 37mm I.D. inner diameter to 43mm O.D. outer diameter.

This Monument AC4P Autocut Plastic Pipe Cutter is suitable for 10mm plastic plumbing pipe.

The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Pack Quantity: 2

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting. Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft. Pack Quantity: 2

Pack of 5 replacement blades for the Monument AC4P Autocut for Plastic Pipe Cutters.

Voltage 240V

Voltage 110V

Monument Drain Cutter Beveller is suitable for use by right or left-handed users. It will cut and bevel plastic soil and drain pipes as short as 100 mm. Removal of the leg enables the cutter to be used in a confined space or alternatively screwed or bolted to a heavy board or timber on muddy sites. Supplied complete with a replaceable long-life steel cutting blade. For cutting and bevelling 110 mm plastic soil and drain pipes.

Monument General wire spring Flexicore drain snakes. Replacement cable for Super-Vee, Power-Vee, Handylectric and PH Drain Rooter. All the General Wire Spring electromechanical drain cleaners should use Flexicore wire rope centre cables. Heavy-duty wire is coiled around 42-strand wire rope and heat treated. The cables are of high strength and correct flexibility. The electromechanical drain cleaning cables are left hand wound. 25ft. x 1/4in. cable with EL Basin Plug Head. Weight 3 kg.

1068I: Scoop 90mm (3.1/2 in) dia.

Scoop 135mm (5.1/4 in). dia.

The Milwaukee M18 FFSDC16 Fuel™ Drain Cleaner has a brushless POWERSTATE™ motor with an integrated drum brake that slows the machine within 3 seconds. A large, non-slip foot pedal for total control even on wet surfaces. The modular design utilises backpack straps for the easiest transport to any roof, drain, crawl space, or clean out. The tool-free drum connection allows users to quickly interchange between cable sizes, or add a second drum to reach a length of 30m. SWITCH PACK™ drums are fully enclosed to provide the best protection and containment of the mess. REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load. Compatible with other brands of 8, 10 and 13mm inner core cables and 16mm open wind cables. Supplied with: 1 x Backpack Assembly1 x Drum Assembly1 x 13mm x 15m Cable1 x 5 Piece Attachment Set Bare Unit, No Battery or Charger Supplied Specification: No Load Speed: 0-250/min.Max. Drain Diameter: 100mmSpiral Diameter: 13mmCable Length: 15m

The Milwaukee M18 FFSDC10 Fuel™ Drain Cleaner has a brushless POWERSTATE™ motor with an integrated drum brake that slows the machine within 3 seconds. A large, non-slip foot pedal for total control even on wet surfaces. The modular design utilises backpack straps for the easiest transport to any roof, drain, crawl space, or clean out. The tool-free drum connection allows users to quickly interchange between cable sizes, or add a second drum to reach a length of 30m. SWITCH PACK™ drums are fully enclosed to provide the best protection and containment of the mess. REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load. Compatible with other brands of 8, 10 and 13mm inner core cables and 16mm open wind cables. Supplied with: 1 x Backpack Assembly1 x Drum Assembly1 x 10mm x 15m Cable1 x 5 Piece Attachment Set Bare Unit, No Battery or Charger Supplied. Specification: No Load Speed: 0-250/min.Max. Drain Diameter: 75mmSpiral Diameter: 10mmCable Length: 15m

Knipex TwistCut Corrugated Pipe Cutter for cutting empty or ready-assembled corrugated pipes to length, with a diameter of 13-32mm. The recessed blades prevent injuries and provide an exact flush cut, without damaging the internal cables. Cut on the outside of fluting, no sharp raw edge inside the corrugated pipe. The body is made from a stable polyamide compound plastic. With a slim and ergonomic shape for work in poorly accessible areas. Double-sided guide for a precise cut. Simple insertion of the corrugated pipe for reliable and simple cutting, no waste. In the case of thick-walled corrugated pipes, reapply after the circular cut just behind the cut and break off the corrugated pipe. Ideal for use in the electrical and construction trades and for plumbing work. Specification: Length: 100mmCutting Capacity : 13-32mm

The Knipex 90 20 Series Cutter for cutting thin walled plastic pipes (e.g. aluminium armoured plastic pipes), flexible plastic and rubber hoses up to 25mm diameter. The tool is made of tough fibreglass reinforced plastic for added strength and durability. With a blade made of high-strength special grade steel, that has been oil-hardened and tempered. They have exchangeable blade have opening spring and locking lever for added grip. Not suitable for cutting steel. Cutting Capacity: 25mm.

The Knipex 00 11 04 Profi-Key is suitable for all standard shut-off systems in the supply of gas, water and electricity for technical installations in buildings, e. g. heating, air conditioning and ventilation systems, shut-off valves,mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 7 8mm.1 x Triangular: 9-10mm. 1 x Two-Way: 3-5mm.1 x Long Execution Conical Square: 6, 7, 8 9mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

The Knipex 00 11 03 7-Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity. It is ideal for technical installations in buildings, such as air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

The Knipex 00 11 01 TwinKey Service Cabinet Key is designed for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems. Consists of two 4-way spider keys connected using magnets providing space saving storage. It has a weight-optimised, zinc die-cast design. It has the following functions: 4 x Square: 5, 6-7, 8-9 10-11mm.3 x Triangular: 7-8, 9-10 11-12mm.1 x Two-Way: 3-5mm.1 x Half-moon: 6mm.1 x Long Execution Conical Square: 6, 7, 8 9mm.1 x Reversible Bit (Slotted 1.0x7mm and PH2).

This IRWIN 10507485 PVC cutter has a simple one-handed ratcheting operation to provide smooth cutting, and clean pipe ends. The cutter's rubberised grips provide confident, safe handling. Capacity: 45mm.

IRWIN Hilmor GLM compact Bender with precision, high pressure aluminium, die cast formers and guides to produce sets, offsets, multiple bends etc., in tubes of a maximum diameter of 22mm. Particularly suitable for installation of small heating systems etc., and is supplied complete with 15mm and 22mm formers and guides. Capacities are: Copper BS2871 15-22mm; Stainless Steel BS4127 15mm; Mild Steel BS4152 15mm.

IRWIN Hilmor Extruded Aluminium Guide for use with CM35, CM42, and UL223 Tube Benders. (For, copper, stainless steel and mild steel)Size. 28mm

Size. 22 mm O.D.

Size. 15 mm O.D.

This Campingaz THP3000PZ high-power gas torch is easy to use with its automatic Piezo ignition. It has ergonomic, multi-position handling for comfortable use and a high-quality metal nozzle. It is equipped with a wire stand to safely stand it in a horizontal position. The burner has a burning angle of 60. Specification: Max. Gas Consumption: 225g/hr.Flame Temperature: 1,800CRun Time: 1hr. 30min.Weight: 333g

The Campingaz Handy auto blowlamp has a highly ergonomic, shock-resistant polypropylene handle for comfortable use. With Piezo automatic ignition, it is extremely easy to light. Features a high-power brass burner and a gas flow rate control giving very fine flame adjustment. Support base included for stability. It can be operated off either the Campingaz CG1750 or CG3500 valve cartridges. Specification: Max. Gas Consumption: 175g/hr.Flame Temperature: 1,750CRun Time: 1hr. with CG1750Weight: 227g

The Campingaz Handy blowlamp has a highly ergonomic, shock-resistant polypropylene handle for comfortable use. Features a high-power brass burner and a gas flow rate control giving very fine flame adjustment. Support base included for stability. It can be operated with either the Campingaz CG1750 or CG3500 valve cartridges. Specification: Max. Gas Consumption: 175g/hr.Flame Temperature: 1,750CRun Time: 1hr. with CG1750Weight: 231g

1 x Campingaz CV470 Plus Butane/Propane Gas Cartridge 450g

1 x Campingaz CV300 Plus Butane/Propane Gas Cartridge 240g

The Campingaz CP250 Isobutane Gas Cartridge contains high-performance Isobutane gas. This cartridge will work better at lower temperatures than other similarly styled cartridges. The CP250 cartridge can be removed and re-attached safely, even if not yet empty and will fit the Campingaz Camp Bistro 3 stove. Gas Weight: 220g

The Campingaz C206GLS Gas Cartridge contains a mixutre of Butane/Propane. It is fitted with a Gas Lock System to prevent the majority of residual gas escaping from the cartridge if accidentally disconnected. Caution: This Product is Highly Flammable. Gas Weight: 190g

This Campingaz 3500 Butane Propane Gas Cartridge has the following specification: Gas Weight: 350gTotal Weight: 515gDimensions: 256 x 66mm

This Campingaz 1750 Butane Propane Gas Cartridge has the following specification: Gas Weight: 175gTotal Weight: 280gDimensions: 143 x 66mm

Faithfull gas quality P.T.F.E (polytetrafluoroethylene) tape will provide a gas, air and water tight seal on threaded joints. This invaluable tape is an essential component when working on gas pipework. Suitable for use on BS21 threads up to 50mm (2in). It is non-adhesive, no need for messy compounds. It wont harden or dry out and is resistant to cracking, impermeable to ?20 bar and performs a lubricating function. Used in the plumbing and heating industries for sealing pipes, conduits, bolts, valves and threaded gas lines that carry all common gases such as air, oxygen, ammonia, butane, chlorine and hydrogen, and liquids such as water, propylene glycol, kerosene and diesel. This tape satisfies BGC IM/16 and is tested to EN751-3:1997. Supplied as a pack of 10 rolls.

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers. Length 114cm (44.3/4in).

Faithfull L-Shaped Radiator Spanner for the installation and removal of radiator valves. With a grooved Hex section for internal lugged valves and a 10mm square section for radiator vent plugs and bleed screws. Zinc plated for rust protection.

The Faithfull Compression Fitting Spanner is a simple, pressed steel, double ended spanner for use on standard compression fitting nuts. Contents: 15mm pipe nut size 24mm.22mm pipe nut size 32mm.

The Faithfull Spanner Set consists of three double ended spanners and a tommy bar specifically designed for use on monobloc tap backnuts. Set contains: 3 x Box Spanners: 8 x 9mm, 10 x 11mm 12 x 13mm1 x Tommy Bar

The Faithfull Tap Backnut Spanner is a double ended box spanner used for the removal or fitting of brass and nylon tap backnuts on basins and baths. Supplied complete with a tommy bar. Spanner Sizes: 27mm and 32mm.

The Faithfull FAIPPC42PRO is a Professional Plastic Pipe Cutter for use in demanding environments. Made from heavy-gauge cast aluminium with a heavy-duty ratcheting mechanism.Fitted with a stainless steel blade and safety locking handle.The combination of a ratchet cutting action and a lopper blade makes these tools highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed a few times to complete a cut.Specification: Capacity: 3-42mm.

Capacity: 3-42 mm

This Faithfull Plastic Pipe Cutter is a handy non-ratcheting plastic pipe cutter, designed for quick and repetitive cutting when installing flexible plastic water pipe up to 28mm.The body of the cutter is manufactured from a hard-wearing Nylon and fitted with a high-performance 53HRC steel blade, to provide an easy clean cut each time. This lightweight tool is ideal for carrying around all day and features a safety lock when stored on tool belt or work trousers. Specification: Capacity: 3-28mm.

The Faithfull PDRWCAUG Deluxe Toilet Auger is designed for the fast unblocking of toilets. This safe and easy to use auger uses a flexible spring steel shaft with a barrel end which can be rotated to clear away blockages in toilet U bends and gullies. The auger features a vinyl sleeve helping protect the toilet bowl from scratches and has a handy clip for storing the spring steel shaft when not in use.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Length: 900mm (35.1/2in).Diameter: 6.35mm (1/4in).

The Faithfull PDRSNAKE Drill Snake is a labour-saving drill auger (snake) designed for use on any variable speed electric or battery drill capable of holding a 1/4in hex shank. The auger is easy to use and will remove most types of blockages from household pipes and drains up to 50mm (2in) in diameter and is ideal for clearing basins, sinks, baths and waste pipes when plungers and chemicals fail to work.The 4.6m (15ft) x 6mm (1/4in) steel cable is encased in a wipe clean PE sleeve allowing the inner cable to spin freely when attached to a rotary drill, a built-in clutch will automatically engage if the cable becomes jammed.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specification: Effective length: 4.6m (15ft).

The Faithfull PDRWCPL Mini Plunger is ideal for tackling blockages in small hand basins and sinks. This plunger is small and discreet, 115mm or 4.1/2in in diameter, and easily stored within a vanity unit or cabinet. It is safe and easy to use and clean.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Size: 115mm (4.1/2in) diameter.Overall length: 180mm (7in).

The Faithfull HP20 is a high quality, easy to use, durable, Jet Pump Drain Unblocker using the power of water to unblock sinks, baths, basin and toilets. The Hydro Jet pump is supplied complete with three different shaped heads making it extremely versatile, enabling it to be used to clear many common pipe and drain blockages around the home.The small head is ideal for use on standard sinks and basins, the larger cupped head is for use on sinks with large plug recesses and also eliminates the need to remove awkward pop up plugs, which can be left in place if removal is not possible. The toilet adaptor is specially shaped to force water through the toilet pan to remove blockages.After use the hydro jet pump is simply cleaned out by drawing clean water into the unit three or four times and pumped to flush it out. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.

The Faithfull PDRAUG25 Drum Auger is easy to use and designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage.The auger has a sturdy plastic body manufactured from PE, ABS wipe clean plastic and features both an integral winding and pistol grip handle which help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Cable length: 7.6m (25ft).Cable diameter: 6mm (1/4in).

A range of replacement pipe cutter wheels for pipe cutters are available, as a sharp blade will result in a better cut and more reliable connection. The Faithfull FAIPCW642 pipe cutter replacement wheels (set of 3) is compatible with PC642

The Faithfull FAIPCCRW Pipe Slicer Cutting Wheels is a pack of 4 replacement wheels for the Copper Chopper Pipe Slicer.The Faithfull Copper Chopper is the perfect tool for making clean burr-free cuts in copper pipes and is also ideal for use in confined or awkward places as it can be operated while using only one hand. Specification: Pack Quantity: 4.

For use on 22mm copper pipe

For use on 15mm copper pipe

The Faithfull adjustable pipe cutter cuts copper, brass, aluminium and light gauge steel tube. It features a retractable de-burrer and has a steel wheel and rollers. The Faithfull FAIPC642 has a tube cutting capacity: 6 - 42mm outside diameter. Uses spare wheel FAIPCW642

Adjustable Heavy-Duty pipe cutter ideal for cutting steel tubing up to 50mm diameter. Uses spare wheel FAIPCW6002

Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube. Tube Cutting Capacity. 3 to 30mm. Uses spare wheel FAIPCW6001

The Faithfull Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube. Ideal for use in confined spaces. Tube Cutting Capacity. 3 to 16mm. Uses spare wheel FAIPCW6001

Size. 22mm.

Combination Tube Bender. Inner bend radius = 76mm Size.22mm. O D