Riveting & Soldering

Gas Torch Heavy-Duty - Piezo (No Gas)

Weller Gas Torch Heavy-Duty Piezo is a hands-free table top torch suitable for paint and varnish removal, jewellery production or plumbing. Features the Piezo electronic automatic ignition system, child-resistant unlock button, gas adjustment wheel and safety stand. Use gas refill PGR1. Specification: Max. Approximate Temperature: 1,300COperating Time: Approximately 50 minutes (80% gas fill)Size (h x w): 175 x 53mm

£ 45.72

W61D Temperature Controlled Iron 60W

Weller W61D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 60WVoltage: 230V

£ 153.92

W201D Temperature Controlled Iron 200W

Weller W201D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 200WVoltage: 230V

£ 230.11

W101D Temperature Controlled Iron 100W

Weller W101D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 100WVoltage: 230V

£ 178.85

SI175 Marksman Soldering Iron 175W 240V

The Weller 175W heavy-duty Soldering Iron for the professional user and light industrial operator. This soldering iron has a thermoplastic handle designed for comfort and a safe grip. All connections are mechanically and electrically secure. It is supplied with a 3-pin plug and conforms to European standards. Specification: Voltage: 230/240VInput Power: 175WMax Temperature: 400CIron Tip: T0054311600, MT40 (43116) Solid Tip STR 16mmWeight: 531g

£ 112.51

SI120D Marksman Soldering Iron 120W 240V

The Weller 120W heavy-duty Soldering Iron for the professional user and light industrial operator. This soldering iron has with a thermoplastic handle, designed for comfort and a safe grip. All connections are mechanically and electrically secure. It is supplied with a 3-pin plug and conforms to European standards. Specification: Voltage: 230/240VInput Power: 120WMax. Temperature: 500CTip: T0054310700, MT30 (43107) Solid Tip STR 12.5mmWeight: 338g

£ 93.77

WP60 Pyropen Soldering Iron Cordless

Weller Cordless Pyropen soldering iron is powered by butane gas.This iron is portable, lightweight and easily refillable. One gas tank filling lasts for approx. 60 minutes.System: Infra-Red/Ultra-infra-Red catalyst combusting butane gas reaction system.Use gas refill PGR1.Specifications: Overall Length: 186mm.Temperature range: 500 C - 1,300 C.Weight: 74g.

£ 138.98

Pyropen Piezo Soldering Iron

Cordless Pyropen piezo soldering iron powered by butane gas. Temperature adjustable by varying gas flow. Push button self-ignition makes the tool ideal for single-handed operation. Supplied complete with 3.0mm long-life tip, hot blow nozzle, heat deflector, spanner, protective cap and operating instructions. Reservoir in handle holds sufficient butane gas for approx. 3 hours continuous operation.Use gas refill PGR1.

£ 297.36

Pyropen Junior Soldering Iron

Weller Pyropen Junior mini iron is supplied with a 0.5 mm tapered needle soldering tip and an aluminium protective cap with pocket clip. The heavy-duty Pyropen Piezo iron has a push button self ignition and is supplied with a tapered needle tip and hot air nozzle which is ideal for shrinking tubing. Temperature is adjusted by varying butane gas flow and the gas reservoir holds sufficient butane for approx. one hours continuous operation. Supplied with 0.5 mm tapered long life soldering tip and a hH Use gas refill PGR1.

£ 165.88

Solder Aid Tool Kit, 6 Piece

This Weller Solder Aid Tool Kit contains 6 double-ended tools that offer multi-functional capabilities. Use to bend and hold leads, remove dust and contamination, adjust pins and components, and many other necessary tasks. Experience precise and improved soldering with Weller's Solder Aid Kit.

£ 13.95

Helping Hands Holder - 2 Arms & Magnifier

This Weller Helping Hands Holder frees up your hands for improved soldering precision and flexibility. Easily position components with two 4-way swivel alligator clamps. It also has a magnifier, allowing you to magnify your work area 4x larger for expert soldering.

£ 17.72

Brass Wire Sponge Cleaner with Holder

The Weller Brass Wire Sponge Cleaner allows you to clean and remove residual solder from your soldering iron tips without water. Simple to use, plunge the iron tip into the brass coils. Cleaning your iron tips helps to prevent rust and extend life. Comes with a slip-resistant, silicone holder.

£ 12.16

HR14 Hand Riveter

This Teng Tools Hand Riveter has a heavy-duty steel plate, and its jaw and case are made of a strong, heat-treated steel alloy.The riveter will take aluminium and steel rivets to produce a permanent mechanical fastener. For a comfortable grip it has PVC handles. The TENHR14 Hand Riveter has the following specifications:Aluminium and Steel rivet capacity: 2.4mm, 3mm, 3.2mm, 4mm, 4.8mm and 5mm.Length: 270 mm (10.1/2 in).

£ 39.49

MR77 Swivel Head Riveter

The Stanley MR77 all-steel riveter has a head that rotates 360 for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage. It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.

£ 34.11

MR55 Right Angle Steel Riveter

Stanley MR55 All steel riveter with an easy spring-loaded handle, which ejects the rivet stem. It has 4 nosepieces and a wrench store in the handle for versatility and convenient storage and accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications. Rugged steel construction for long-lasting durability.

£ 27.28

MR100 Fixed Head Riveter

This Stanley MR100 contract grade, heavy-duty, long-lasting all-steel riveter is supplied with 4 nosepieces and a wrench store in the handle for versatility and convenient storage.It accepts 2, 3, 4 and 5mm aluminium, steel and stainless steel rivets for a wide range of applications.

£ 34.11

Automotive Rivets 4 x 12mm Steel Blister of 50

The Rapid Automotive Rivets are made from high grade aluminium to ensure a secure fix. They are zinc coloured to match licence plates on cars, vans, trailers and motorbikes. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters. Specifications:Size: 4 x 12mm.Grip range: 6-9mm.Pack: Blister of 50.

£ 11.88

RP10 Hand Riveter Starter Kit (100 Piece)

This Rapid RP10 Hand riveter and 100 rivets is ideal for fast, trouble-free riveting. This handy kit includes 100 rivets to get you started straight away. The ergonomic, soft grip handle delivers comfortable use and the RP10 also features a handy integrated wrench. It is designed for use with 3.2 - 4.8 mm rivets. Fixing with rivets is easy in just a few quick steps you can achieve a tight, secure and permanent bond. There are many applications for rivets, including fixing number plates, all types of metal sheets, repairing exhausts on motorbikes, handles of a school bag, strengthening plastic sheets or leather coverings and decorating fabrics. This starter set includes the following:1 x RP10 hand riveter.100 x rivets: 25 of each 3.2x8mm, 4x10mm, 4x14mm and 4.8x12mm.

£ 53.78

RP100 Heavy-Duty Press Less Hand Riveter

Fixing with rivets is easy. In just a few quick steps you can achieve a tight, secure and permanent bond. There are many applications for rivets, including fixing number plates, all types of metal sheets, repairing exhausts on motorbikes, handles of a school bag, strengthening plastic sheets or leather coverings and decorating fabrics. The Rapid RP100 Heavy-Duty Press Less Hand Riveter has a built-in power reduction mechanism to reduce the effort needed. It is ideal for use on tough materials such as metal. The power reduction mechanism and long arms substantially reduce the force needed to fix the rivet, allowing the tool to be used for long lengths of time without fatigue. The RP100 works with both stainless steel and aluminium rivets with 3.2, 4 or 4.8mm diameters. When the rivet is fixed, the rivet pin will automatically fall down into a socket, ensuring no time is wasted collecting them from the ground. It has a soft grip handle for comfort and interchanging nozzles to fix all diameters of rivets. A wrench is integrated into the handle to make changing the nozzle quick and easy. The tool is also covered by a 5 year guarantee. The RP100 works with both stainless steel and aluminium rivets with 3.2, 4 or 4.8mm diameters.

£ 72.82

Fryolux Solder Paint T1333 Sn40/Pb60 125g

Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time. Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.Size: 125g.

£ 34.91

SI40W Soldering Iron 40W 240V

The Faithfull Lightweight Soldering Iron with heat-resistant handle, suitable for soft soldering metal alloys, brass and copper. The working temperature is reached quickly and a metal holder is supplied to keep the hot iron safely at rest when not in use. Ideal for fine soldering (tip width 3.5mm) and hobby work on a variety of items, such as circuit boards, jewellery and models or for repair work on electrical items. Fitted with 13 amp plug. Voltage: 230/240V.Input Power: 40W.Tip Width: 4mm.

£ 10.45

SI25W Soldering Iron 25W 240V

The Faithfull Lightweight Soldering Iron has a heat-resistant handle, suitable for soft soldering metal alloys, brass and copper. The working temperature is reached quickly and a metal holder is supplied to keep the hot iron safely at rest when not in use. Ideal for fine soldering and hobby work on circuit boards, jewellery and models or for repair work on electrical items. Fitted with 13 amp plug and a 3.2mm tip. Voltage: 230/240V.Input Power : 25W.Tip Width: 3.2mm.

£ 9.61