Tool case with assortment of 163 GENERAL MAINTENANCE TOOLS
• Removable interior tool panel
• Integrated soft foam tray

 465x330x170 mm

Components
BW 42 Combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 111 Adjustable wrenches 250 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1082BM Diagonal cutting nippers  160 mm 1
BW 1150BM Heavy-duty combination pliers  180 mm 1
BW 1166BM Extra-long needle knurled nose pliers  160 mm 1
1201E Screwdrivers for slotted head screws  2,5x50 - 3x75 - 4x125 - 5,5x150 - 6,5x150 - 8x150 mm 6
1202E Screwdrivers for cross head Phillips® screws  PH1x80 - PH2x100 mm 2
BW 1253 Mains testing screwdriver  3,5x100 mm 1
1209E/PZ  PZ1x80 - PZ2x100 mm 2
BW 1256/C21-1 22
BW 1370 300 Engineer's hammers 300 g 1
BW 1692/5 Measuring tapes 5 m 1
BW 1725CR Mini hacksaw frame 150 mm 1
1771 18 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866 1
BW 900 Hexagon hand sockets, 1/4"  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 1
BW 900/42 1/4” drive sliding T-handle 110 mm 1
BW 900/55 Reversible ratchet, 1/4"  1
BW 920A Hexagon hand sockets, 1/2"  10-11-12-13-14-15-16-17-18-19-21-22-24 mm 13
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 910/16F Adaptor - F3/8"xM1/2" 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/55 Reversible ratchet  1

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

The Vaughan 3 Piece Nail Punch Set is used for countersinking and finishing nails. They have a high-carbon steel construction with a black oxide finish to ensure long-lasting performance. The hand grips provide added user comfort. Sizes: 0.8, 1.6 and 2.4mm

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

1 x Trend EASYSCRIBE Scribing Tool with 3 x Graphite Leads.

1 x Pack of 10 Trend EASYSCRIBE Spare Graphites

This Teng 1/2 inch drive Stud Extractor is used for inserting and extracting stud bolts. The extractor has a range from 5.5 to 19mm and features one eccentric journaled, knurled wheel which grips against an internal fluting. Specifications: Drive: ½ in.Range: 5.5 to 19mm.

Range 8 - 13 mm (5/16 - 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 13 - 19 mm (1/2 - 3/4 Inch) Handle 60 mm (2 3/8 Inch)Range 19 - 32 mm (3/4 - 1 1/4 Inch) Handle 60 mm (2 3/8 Inch)Range 32 - 54 mm (1 1/4 - 2 1/8 Inch) Handle 60 mm (2 3/8 Inch)Range 54 - 89 mm (2 1/8 - 3 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 89 - 150 mm (3 1/2 - 6 Inch) Handle 82 mm (3 1/4 Inch)

Range 8 - 13 mm (5/16 - 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 13 - 19 mm (1/2 - 3/4 Inch) Handle 60 mm (2 3/8 Inch)Range 19 - 32 mm (3/4 - 1 1/4 Inch) Handle 60 mm (2 3/8 Inch)Range 32 - 54 mm (1 1/4 - 2 1/8 Inch) Handle 60 mm (2 3/8 Inch)

1 x Starrett S565PC Pin Punch Set 8 Piece Sizes: 1.5mm (1/16in), 2.5mm (3/32in), 3mm (1/8in), 4mm (5/32in), 5mm (3/16in), 5.5mm (7/32in), 6mm (1/4in) and 8mm (5/16in).

1 x Starrett S248PC Long Pin Punch Set 5 Piece Sizes: 3mm (1/8in), 5mm (3/16in), 6mm (1/4in), 8mm (5/16in) and 9.5mm (3/8in).

Set of all sizes: 1.5mm (1/16 in), 2mm (5/64 in), 2.5mm (3/32 in), 3mm (1/8 in) and 4mm (5/32 in).

Description: Double end Body diameter: 10 mm Contact diameter: 6 mm and pointed contact

Description: Single end Body diameter: 10mm Contact diameter: 6mm

Description: Double endBody diameter: 0.500 Inch Contact diameter: 0.200 Inch and pointed contact

Description: Single end Body diameter: 0.375 Inch Contact diameter: 0.200 Inch

Inch Reading Gauges with Tapered leaves 1/2-1.4 x 1 1/32 in No. of leaves: 26 Range: 0.0015 - 0.025 in (0.0015, 0.002, 0.0025, 0.003 to 0.025 by 0.001 in steps).

Millimetre Reading Gauges with Straight leaves 12.7 x 77 mm No. of leaves: 20 Range 0.05 - 1 mm (by 0.05mm steps)

Thickness: 0.06mm

Thickness: 0.50mm

Thickness: 0.05mm

Thickness: 0.03mm

Thickness: 0.20mm

Thickness: 0.15mm

Thickness: 0.10mm

Inch Gauge 12 in long Thickness: 0.005 in

Inch Gauge 12 in long Thickness: 0.004 in

Inch Gauge 12 in long Thickness: 0.030 in

Inch Gauge 12 in long Thickness: 0.020 in

Inch Gauge 12 in long Thickness: 0.002 in

Inch Gauge 12 in long Thickness: 0.012 in

Inch Gauge 12 in long Thickness: 0.0015 in

Inch Gauge 12 in long Thickness: 0.010 in

Inch Gauge 12 in long Thickness: 0.001 in

Inch Reading Gauges with Straight leaves 1/2 x 3 1/32 in No. of leaves: 26 Range: 0.0015 - 0.025 in ( 0.0015, 0.002, 0.0025, and 0.003 to 0.025 by 0.001 in steps)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 4mm (5/32 in)

Size 2.5mm (3/32 in)

Size 1.5 mm (1/16 in)

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Millimetre Reading Gauges with Straight leaves - Sized 12.7 x 114mmNo. of leaves: 13Range 0.04 - 5mm (0.04- 0.08 by 0.01mm steps 0.10, 0.15, 0.20,0.30, 1.0, 2.0, 3.0 and 5.0mm).

Inch Reading Gauges with Straight leaves 1/2 x 4 1/2 in No. of leaves: 13 Range: 0.0015 - 0.200 Inch (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010 to 0.040 by 0.01 in steps , 0.075, 0.100, 0.200 in).

This micrometer has a 63.5mm (2.1/2in) base and 3.2mm (1/8in) diameter measuring rod. Base and rod are hardened, ground and lapped. Furnished with ratchet stop, lock nut and case. Size: 0-75mm.Rods: 3.Graduation: 0.01mm.

The Starrett 436.1XRL-2 Outside Micrometer has the following specification: Size: 1-2in.Graduation: 0.001in.

The Starrett 436.1MXRL-75 Outside Micrometer has the following specification: Size: 50-75mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-50 Outside Micrometer has the following specification: Size: 25-50mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-100 Outside Micrometer has the following specification: Size: 75-100mm.Graduation: 0.01mm.

Precision ground straight edge with a bevel on one side, which is excellent for drawing or scribing straight lines and checking surfaces for straightness. The thickness and design permit it to retain shape and accuracy. Specification: Length: 600mm (24 in)Width x thickness: 36 x 4.4mm (1 13/32 x 11/64 in).

Size 9.5mm (3/8 in)

Size 8mm (5/16 in)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 3mm (1/8 in)

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required. Punch length: 125mm (5 in).Punch diameter: 14mm (9/16 in). Spare points also available STR18APOINT

Millimetre Reading Gauges with Straight leaves 12.7 x 77mmNo. of leaves: 13 Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)

Capacity: 70mm (2 3/4 in). Throat Depth: 45mm (1 25/32 in).

Capacity: 44mm (1 3/4 in). Throat Depth: 25mm (1 in).

Lightweight and ideal for measuring inside diameters, the rods are solid, insulated and assembled on one side of the micrometer head. Anvils on rods are adjustable for length. Rod and anvils are hardened and ground. Furnished in an attractive protective case. Size: 50-300mmGauge: 12mmScrew adjustment: 13mmGraduation: 0.01mm

Size 4 x 100mm (5/32 x 4 in)

Size 3 x 100mm (1/8 x 4 in)

Size 2.5 x 100mm(3/32 x 4 in)

Size 1.5 x 75mm (1/16 x 3 in)

Size 2 x 100mm (5/64 x 4 in)

The Stanley Punch Chisel Set contains a selection of high quality, chrome vanadium steel chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets. Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines, hole locations and pilot drill starting points. Contains the following: 3 x Cold Chisels: 10, 12, 16mm6 x Pin Punches: 1.5, 3, 4, 5, 6, 8mm3 x Centre Punches: 2, 6, 8mm

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

The Stanley FatMax Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

This set of 3 punches contains the following tip sizes:1/32in (0.8mm) Yellow Sleeve 1/16in (1.6mm) Grey Sleeve3/32in (2.4mm) Red SleeveOverall Length: 125 mm / 5in

Tip Size: 2.4mmLength: 5inColour: Red Sleeve

Tip Size: 1/16inLength: 5inColour: Grey Sleeve

Tip Size: 1/32inLength: 5inColour. Yellow Sleeve

Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use. Length: 3.2 x 100mm (1/8 x 4in).

Roughneck 3 Piece Nail Punch Set. Each punch is fitted with a colour coded grip for easy identification. Contains: Yellow: 0.8mm (1/32in), Blue: 1.6mm (1/16in), Red: 2.4mm (3/32in)

RIDGID 227S Inner-Outer Reamer Capacity: 12-54mm (1/2 - 2in).Weight: 0.56kg.

RIDGID 223S EN Inner-Outer Reamer Capacity: 6 - 40mm (1/4 - 1.1/4in).Weight: 0.34kg.

Size.M10 x 1.50 Pitch.Intermediate

Size.M8 x 1.25 Pitch.Intermediate

Size.M6 x 1.00 Pitch.Intermediate

Size.M5 x 0.80 Pitch. Intermediate

Please note NOT supplied with a tapping drill.Kit 18mm x 1.5Length 12.7mm (1/2 in)

Please note NOT supplied with a tapping drill.Kit 14.0mm x 1.25Length 1 1/2 and 1 x Diameter

Please note NOT supplied with a tapping drill.ExtensionKit 14.0mm x 1.25Length 1 1/2 X Diameter

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container. Please note NOT supplied with a tapping drill.Kit 12mm x 1.25Length 1 1/2 x Diameter

Kit 10.0mm x 1.0Length 1 1/2D

Please note requires a 16.5mm drill bit - NOT supplied.Size 16mm x 1.5Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Size 14mm x 1.5Length 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 12mm x 1.5Length 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 10mm x 1.25Length 1 1/2 X Diameter

Supplied complete with appropriate size tapping drill.Size 8.0mm x 1.0Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 20mm x 2.5Length 1 1/2D

Please note NOT supplied with a tapping drill.Kit 18.0mm x 2.5Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 16mm x 2.0Length 1 1/2D

Please note NOT supplied with a tapping drill.Kit 14.0mm x 2.0Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 12.0mm x 1.75Length 1 1/2 x Diameter

Recoil Inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials, in original equipment manufacture. Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container. Specifications:Thread: M11.0.Pitch: 1.50.Type Quantity: Coarse (5 inserts).

Supplied with a tapping drill.Kit 10mm x 1.5Length 1 1/2 X Diameter

Supplied with a tapping drill.Kit 9mm x 1.25Length 1 1/2 X Diameter

Supplied with a tapping drill.Kit 8.0mm x 1.25Length 1 1/2D

Supplied with a tapping drill.Kit 7.0mm x 1.0Length 1 1/2 x Diameter