The Monument 4501F GRIP R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.

This Monument 438D Adaptor Primus 2000 To 430F adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g., Primus2000 and Calor340.UNEF: 7/16in.Made in Britain.

The Monument 437A Adaptor connects the 430F professional soldering and brazing torch (UNEF 7/16 in) to 1in US-Style bottles e.g., propane, MAPP and MAPPro.Made in Britain

This Gasex UN2037 Gas is a professional grade gas from Monument enables 30% faster soldering and brazing than propane.It does not contain butadiene, TUV approved and complies to EN417. Specifications: Thread: 7/16in.Bottle size: 450g.

The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle. The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders. Made in Britain.

The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.

Monument 352R. Size: Large 50mm (2 in).

Monument 351O. Size medium: 38mm (1 1/2 in).

Monument 350L. Size small: 28.5mm (1.1/8 in).

Size: 15 to 42mm (1/2 to 1 1/2 in).

The Monument Gasex Torch is suitable for soldering and brazing copper, brass and aluminium, using Gasex gas. It has interchangeable tips. The Gas Torch features Piezo ignition for ease of use, and produces a hot turbine flame, which can be locked via a lock button. The size of the flame can be altered by an adjustable valve. An ergonomic hand grip improves user comfort. Conforms to EN417. Supplied with a Super Cyclone Tip.

Monument Pro Gas Torch is suitable for soldering and brazing of copper, brass and aluminium, and for use with propane and MAPP gas. It has interchangeable tips. The Gas Torch features Piezo ignition for ease of use, and produces a hot turbine flame, which can be locked via a lock button. The size of the flame can be altered by an adjustable valve. An ergonomic hand grip improves user comfort. The Monument 3475g Pro Gas Torch EN12205 is supplied with a Super Turbine Tip.

Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.

Supplied with small and medium jaws. Size 15 and 22mm, 1/2 and 3/4 in

Monument Spark Lighter or Striker for lighting LP Gas Torches, the cup shaped shield traps the gas and ensures ignition.

Monument Adjustable Fitted 2 Jaw Wrench (DIY) is an adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Round cross section steel handle with removable tommy bar. Size: 15 and 22mm (1/2 and 3/4 in).

The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.

This Monument 3351G Drill Snake is encased in a plastic tube which remains stationary as the snake is rotated by the electric drill. It is fitted with an automatic clutch slipping if the boring head gets caught in the line.Effective length: 4.5m (15ft).

The Monument Drain Auger comes with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals, and small drains etc.The rotating crank handle, with thumbscrew, fits over and locks the cable and can be entered through strainers.The 3344K drain auger can also be used without the handle as a refill for the MON3313. Specifications: Length: 7.5m (25ft) long retractable.Diameter: 6mm (1/4 in).

Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).

Specifications: Length: 7.5m (25ft).Diameter: 6.35mm (1/4in)

The Monument 331E Crutch End Domestic Stopcock Key has been designed for turning on and off hard-to-reach or difficult stopcocks, such as under kitchen units, sinks and stiff to turn outside taps. The design provides increased leverage and is supplied with a removable tommy bar in hexagon shaft. This allows it to connect to a socket and ratchet handle for ease of use in difficult corners.

This Monument Heavy Duty Basin Wrench is used for fitting back nuts and union nuts, of pillar and bath taps behind basins, sinks and baths. Manufactured from strong malleable material, the 327R wrench has correctly machined jaws to fit standard nuts, 15 and 22mm.The offset design allows you to reach behind both sinks baths easily. Specification: Capacity: 1/2 and 3/4in BSP. Overall Length: 260mm.

Monument GRIP Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins. Supplied with T-bar. The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.

The Monument GRIP 323F Tap Backnut Box Spanner is double-ended for the quick assembly of tap backnuts on basins. Part of the GRIP range. Size: 27 and 32mm.

The Monument MON310 310R Wheel for plastic to fit MON266 and TC3 Cutters, comes in a pack of 1.

The Monument 308L Waste Nut Box Spanner has holes for a tommy bar to be inserted, for fitting and removing wastes easily.

The Monument 3034T Copper Fitting Cleaning Brush has stiff steel bristles for cleaning copper fittings and socket formed joints on copper pipe, prior to soldering. Specifications: Size: 15 22mm.

Monument Clean Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.

Monument Abrasive Clean Up Strips, 180 grit silicone clean up strips of abrasive waterproof open mesh material for a multitude of cleaning jobs such as roughing up pipe, cleaning inside fittings (can be cut into small strips), deburring metal and wooden surfaces.

Monument Disposable deburring tool. The swivelling blade rotates freely to allow allsorts of deburring operations to be carried out inside tubes, on sheet materials, inside holes etc. Suitable for use on steel, copper, brass, plastics, wood and castings.

Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general-purpose applications. Head Length: 10mm.Total Length: 195mm.Pack Quantity: 5.

The Monument, pack of 3, Boiler Flue Brushes (MON3014J-1), contains the following brush sizes: 16mm diameter, 50mm diameter and 50 x 16mm.

The Monument MON301 fits Monument 300 Pipe Cutters. Pack colour: Orange (Packs are colour coded according to use).Pack of 1.

Monument Semi-Automatic Pipe Cutter enables 8-22 mm diameter copper and thicker walled plastic pipes such as those used in Central heating to be cut automatically once it has been sized and tightened. Thin walled plastic pipes may collapse too easily unless an internal support is given to pipes. After tightening no further adjustment or feeding of the wheel into the tube is required. Soft copper can also be cut without crushing if the tool is used like a conventional Cutter by feeding the wheel into the tube.Ideal for use in confined spaces. Capacity 8 to 22mm. Replacement wheel number MON301.

The Monument MOPITUP Cloth is a versatile super absorbent sheet, which provides a quick, easy and effective way to clean up all water based spillages in the home or workplace. Each sheet will absorb up to 2 litres of water. The water is locked in and cannot be squeezed out. Ideal for:Plumbing emergencies and repairs.Dripping radiators.Radiator and pump removal.Leaking pipes toilets and basins.Overflow leaks in roof tanks.Leaking hot water tanks.Fridge and freezer defrosting.Large floor spillage.Protection for carpets and floors.Draining header tanks. ONLY for use with water based spillages. Sheet Size: 370 x 370mm.Monument 2951Y MOPITUP Cloths Pack of 3

Monument Trac Pipe is a stainless steel, bendable corrugated gas pipe with a yellow polyethylene cover.This cutter has been designed to cut the omegaflex Trac Pipe from DN15/15 mm to DN32/32 mm.

Monument MON2922 Copperkey Pipe Cleaning Tool

Monument MON2915 Copperkey Pipe Cleaning Tool.

Monument 284I Spare Wheel for Stainless Steel Tube 1 ,2A. Qty: 1

Spare wheel pin for 1 and 2a tube cutter.(MON265 & MON266)

Monument 273A Spare Wheel for Tube Cutters size 0 , 1 , 2A, TC3. General purpose for copper, brass and aluminium tube.

1 x Monument 2691G Autocut Spares Kit to suit both 15 22mm autocut pipe cutters

Capacity: 12 - 43mm.

Capacity: 4mm-28mm.

2649F Spare Blade for MON2644 28mm Plastic Pipe Cutter

Monument Plastic Pipe Cutter. Maximum Pipe Size: 60mm.

Monument Plastic Pipe Cutter. Maximum Pipe Size: 42mm ratchet action.

Monument 2644Q Plastic Pipe Cutter. Maximum Pipe Size: 28mm.

Monument Pipe Cutter is a high quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff. It assures a square even cut and all parts liable to wear are heat-treated. For sizes: 4mm up to 22mm (copper tube).

This Monument 2611S Mini Bender is for up to 180 bends on 6, 8 and 10mm copper pipe (outside diameter).

Spare pipe bender Guide for Monument 2603T 22mm pipe bender. Will also fit Record 218M and Hilmor GLM benders. Specifications:Size: 22mm.

Spare Pipe Bender Guide for Monument 2601N 15mm pipe bender. Will also fit Record 218M and Hilmor GLM benders. Specifications: Size: 15mm.

The Monument Copper Pipe Bender, 15-22mm, is designed to professionally bend BSEN1057 15mm and 22mm copper pipe and 15mm stainless steel tube. The aluminium formers are marked with bending angles of 30, 45-and 90-degree offsets allowing for accurate bending. The Monument Pipe Bender is supplied with a replaceable 15mm (MON2601) and 22mm (MON2603) aluminium bending guides.The Monument Pipe Bender can also be used with the MON2626 2626M Bending Arm Extension allowing for easier bending of 22mm pipe. Replacement guides, formers and hook stops are available separately.

Monument 259I Gas Test Gauge has the following specification: Size: 900mm (36in).Capacity: 90 Millibar.

The Monument 2580U Vent Sizing Gauge is used to measure the size of the slots in an air vent to calculate the area of ventilation provided by a vent where this info is not readily available. The gauge is stepped in increments of 1mm and will measure vent slots from 5mm up to 10mm. Made from stainless steel.

Monument 258F Gas Test Gauge. Size: 600mm (24 in).Capacity: 60 Millibar.

Monument 257C Gas Test Gauge. Size: 300mm (12 in).Capacity: 30 Millibar.

The Monument Mains Water Pressure Testing Gauge with 3/4in BSP thread for fitting to taps. Maximum Pressure: 11 bar

The Monument Drain Down Hose is designed to lay flat when draining down a central heating system. Unlike standard hose pipe, when uncoiled the hose lays flat, allowing water to flow with gravity. Complete with a hose clip to affix to the drain off cock. The silicone rubber hose can be coiled neatly with hook loop fasteners for storing/transporting. Specification: Length: 15mInternal diameter: 12mmOutside diameter: 19mm

The Monument 2363L OMAT Soldering Mat has the following specifications: Size: 150mm (6in)Pipe Capacity: 15-22mm

The Monument 2361F OMAT Soldering Mat has the following specifications: Size: 250mm (10in)Pipe Capacity: 15-22mm

The Monument 2355M OMAT Soldering Mat has the following specifications: Size: 305mm (12in)Pipe Capacity: 15-22mm

Monument 2351A Soldering Brazing Pad resists temperatures up to 600 Celsius, and does not present any of the hazards associated with asbestos material. Made from HDW graphite material Size: 250mm (10in).

Monument 2350X Soldering Brazing Pad resists temperatures up to 600 celsius, and does not present any of the hazards associated with asbestos material. Made from woven glass fabric (Professional quality). Size: 300mm (12in).

Monument Glass Fibre Plumbers Mat is an asbestos free, heavy-duty and professional quality mat that provides protection in most soldering and brazing work. The mat resists temperatures up to 600 C, and does not present any of the hazards associated with asbestos materials. Made from glass fibre fabric. Size: 300 x 250mm (12 x 10in)

The Monument MON22R suits 22PC Automatic Pipe Cutter and 1722 pipe cutter. Ideal for use when space is limited.

Monument Automatic Copper Pipe Cutter. Size: 22mm.

Monument Automatic Copper Pipe Cutter, 22 in a display jar. Size: 15 mm. Ratchet handle available (Code:- MON15R.)

The Monument 2166M TRV Tail Driver Fitting Socket has been designed to enable fast removal and installation of radiator valve tails and will fit most makes and sizes. The socket can be used with a either a cordless drill chuck or ratchet with 10mm hex socket.

The Monument Professional Power Plunger comes with 3 adaptors which should fit most shower, bath, basin, and bidet wastes. When pumping the MON2161X unit in situ, it will build up pressure which is then activated via the trigger to blast away the blockage. When the trigger is pulled quickly the compressed air is discharged, at once, causing a shock wave through the water to dislodge the blockage within the waste, even if it is past the trap, down the pipework and around several bends.

The Monument 2117Q Pro Deburring Tool is ideal for deburring inside copper pipe. Its swivelling blade rotates freely to enable allsorts of deburring operations to be carried out on the inside of pipes, on sheet materials, inside holes etc. The blade is replaceable. The deburrer is suitable for use on steel, copper, brass, plastics, wood and castings.

This Monument 2116N Burrfect Square Deburrer cleans and deburrs 4 different sizes of plastic waste pipe, it is a high quality metal square with each side de-burring a different size of plastic pipe.This deburrer tool will deburr the following sizes: 19mm (3/4in), 32mm (1.1/4in), 38mm (1.1/2in) and 50mm (2in).The 2116N includes a handy hanging hole, and is made in Britain.

The Monument Heavy-Duty Compression Fitting Spanner is double ended it has 24mm and 32mm ends for 15 and 22mm compression fitting nuts.The 2069R spanner conforms to DIN 895 standards. Specifications: Size: 15 x 32mm.

This Monument Radiator Valve Spanner is used to facilitate fitting and removal of standard and thermostatic radiator valves.The 2065F is made in Britain.

These Monument Radiator Bleed Keys are used for releasing the excess air trapped in a radiator.They each have a clock key design for convenient attachment to a keyring. Specification: Pack Quantity: 2.

This Monument Three-Legged Radiator Valve Key is used for 1/2in, 3/4in and 1in radiator valve's. It has 7, 8 and 9mm square profiles.The key is made from brass pressing.

The Monument Radiator Spanner Air Release Key, 2054X, made from steel, a zinc plated valve spanner and an air release key, with a slightly offset handle. Specification: Size: 12mm (Double Ended).

This Monument Steel Radiator Spanner is used on 3/8 in and 10 mm square section radiator vent plugs and bleed screws.It has a Zinc plated finish with a slightly offset handle.

This Monument Universal Radiator Valve Key has tapered ends and are therefore self-restricting. The three profiles make the tool universal, catering for 3/8 in and 10 mm square section radiator vent plugs and bleed screws.Bayonet or internal lug type radiator valves allow for variations in size, shape, and position. The 12 mm to 14 mm internal hexagon valves are tapered allowing for variations in size.

Monument Radiator Spanners Twin Pack with 1 x 10mm and 1 x 12mm square section radiator spanners. Suitable for vent plugs and bleed screws. They are made from zinc plated steel with a slightly offset handle for ease of use.

The Monument 2050L Gas Meter Radiator Bleed Key is used for releasing air which can appear in a radiator, and for opening gas meter cupboards.Made in Britain from engineering plastic.

This Monument Radiator Stepped Wrench Ratchet handle is suitable for use on most radiator valves, nipples, plugs, tank connectors etc. It has the following step sizes 10, 12, 12.7, 17 22mm.

Twin Pack of Compression Fitting Spanners 15/22mm.

The Monument; 2040G Pump Nut Spanner is suitable for use on most nuts found on domestic central heating pumps. It has a drop forged steel construction for durability. Size: 52mm A/F (2in).

Monument Compression Nut Fitting Spanner is a one piece all steel construction compression nut spanner, that is single ended and made from drop forged steel for added strength and durability. Will suit most 28mm compression nuts and has an overall length of 290mm.

The Monument 2035Q; Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm copper pipe. This puller simply engages with 14tpi thread of the compression fitting to remove the olive from the tube. With a 1/2in square drive for attachment to a ratchet. Made in Britain.

Single pack.

The Monument 1851O Vari Pitch One Piece Holesaw has the following specifications:

The Monument 1850L; Vari Pitch One Piece Holesaw has the following specifications:

The Monument 1848E Vari Pitch One Piece Holesaw has the following specifications:

This Monument Tee Piece for U Gauges connects three pieces of rubber hose together for convenient connection to U Gauge, bellows and nipple cap.

Monument MON1810 Autocut Cooper Pipe Cutter . Size: 10mm.

The Monument MON1808 1808O Autocut Copper Pipe Cutter comes in the following: Size: 8mm

The Monument MON1806 1806L Autocut Copper Pipe Cutter comes in the following: Size: 6mm.

The Monument MON180 180S Nipple Cap are for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge. It is made from plastic with a washer. Specification: Size: 1/2in BSP.

Monument Lead Ladle with a handle welded to a pressed steel bowl with a zinc plated finish. Suitable for pouring molten metals and compound. Bowl diameter: 100mm (4 in).

Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.

The Monument 175C U-Gauge (also known as a Manometer) should be used to test for leaks after installation or repair of any drain or pipeline system. Made from unbreakable parts, it will test up to 100mm (4in) water gauge pressure irrespective of pipe diameter. The hinged lid of the gauge folds back so that it forms a base behind the gauge for added stability.