The Kidde 10SCO is a battery-powered combination alarm that offers protection from the dual dangers of smoke and carbon monoxide (CO) in a single unit for convenience. Its voice alarm feature audibly announces which danger has been detected. The alarm has a peak level memory, which provides notification (voice and LED) when dangerous CO levels have been previously detected. Its front loading battery compartment makes changing the battery easy and convenient. The 10SCO has a Hush™ button to temporarily silence nuisance alarms. It also has a test/reset button to allow regular testing of the alarm function. Designed to be wall or ceiling mounted, this battery-powered unit is perfect for when space is limited but protection is paramount. It can be used in most locations throughout the home. BSI certified to EN14604:2005 (Smoke).BSI certified to EN50291-1:2010 (Carbon monoxide).CE tested and certified.

The Kidde 10LLDCO Alarm is sleek and lightweight with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning the battery will not have to be changed for the duration of the alarm's life. Itsdigital display clearly shows the levels of carbon monoxide. A peak level display allows the highest CO level recorded (between 11 - 999ppm) to be displayed. The 10LLDCO has a unique, water-based Kidde CO Electrochemical Sensor. It features a CO 'Quick-Test' feature allowing the alarm to be temporarily desensitised to allow quick testing using approved CO spray. The alarm's interrogation feature allows peak level and test history to be analysed by Kidde upon arrangement. It has 3 LED's - alarm, operate and fault, and an end-of-life warning alerting the user when to replace the alarm. A test/reset button allows regular testing of the alarm function. Ideal for use in all living areas and can be installed on a wall, or ceiling, or used free-standing on a table or shelf. It is also easily portable so can be taken on holidays. BSI Certified to EN52091-1.CE Tested Certified.

The Kidde 10LLCO Carbon Monoxide Alarm is sleek and lightweight with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning that the battery will not have to be changed for the duration of the alarms life. It has a unique water-based Kidde CO Electrochemical Sensor and features an alarm memory, meaning that a red LED will flash every 60 seconds to indicate a CO event has occurred. A CO Quick-Test feature temporarily desensitises the CO sensor to allow quick-testing using approved CO sprays. An interrogation feature allows peak level, test history to be analysed by Kidde upon arrangement. The alarm has 3 LEDs - alarm, operate and fault. Its end-of-life alarm alerts the user to replace the alarm. A test/reset button allows regular testing of the alarm function. Ideal for use in all living areas and can be installed on a wall or ceiling or used free-standing on a table or shelf. It is also easily portable so can be taken away on holidays. BSI Certified to EN52091-1.CE Tested Certified.

The Faithfull FAITAPEUWAT Water pipe warning tape is blue with black writing indicating that caution should be taken due to buried water services.

The Faithfull FAITAPEUGAS Gas pipe warning tape is yellow with black writing indicating that caution should be taken due to buried gas services.

The Faithfull FAITAPEUELE Electric cable warning tape is yellow with black writing indicating that caution should be taken due to buried electrical services.

This Faithfull Laminated Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Red/White - Stripes

This Faithfull Laminated Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Black/Yellow - Social Distance

This Faithfull Professional Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Red and White stripes

This Faithfull Economy Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Red/White Stripes

This Faithfull Economy Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Black/Yellow Stripes

This Faithfull Professional Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Black and Yellow stripes

This Faithfull Laminated Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Black/Yellow - Arrows

This Faithfull Laminated Self-Adhesive Hazard Tape has the following specification: Length: 33mWidth: 50mmColour: Black/Yellow - Stripes

Width: 70mmLength: 500MColour: Red White

Faithfull Heavy-Duty Barrier Tape is an extra strong, heavy-duty non-adhesive PVC tape used for demarcation and cordoning off areas. The highly contrasting coloured stripes serve as a clear visual warning and also present a barrier to areas that require to be sectioned off. Suitable for a wide range of uses in various trades and services that include, construction sites, factories, warehouses, emergency services and many other situations where safety of personnel is a priority.

Width: 70mmLength: 500MColour: Black Yellow

Faithfull Barrier Fencing is a temporary, flexible fencing for fast erection and visibility. Made from durable polypropylene. Its bright orange colour is highly visible. Used widely on construction sites and anywhere that requires demarcation areas. Specification: Width: 1mLength: 50m

Everbuild PVC Hazard Tape Colour: Black / Yellow.Size: 50mm x 33m.

Everbuild PVC Hazard Tape Colour: Red / White.Size: 50mm x 33m.

The Everbuild Barrier Tape Red / White sized 72mm x 500m. This tape is a super strength, non-adhesive barrier tape, and it is supplied in a dispensing box for cordoning off areas such as warehouse aisles, building sites, crowd control etc.It provides a clear visual warning, and is suitable for interior or external use being both waterproof and weatherproof. Specifications: Colour: Red/White.Size: 72mm x 500m.High strength HDPE film.

The Arctic Hayes Carbon Monoxide Alarm Tester Spray is simple and easy-to-use. Designed to test all carbon monoxide alarms and flue gas analysers, as recommended by the fire brigade. Offers up to 7 tests per can.

The Arctic Hayes Smoke Alarm Tester Spray is simple and easy-to-use. Designed to test the sensor in smoke alarms, as recommended by the fire brigade. Offers up to 40 tests per can.

The Stanley Folding Sawhorses are easy-to-carry and store, they have strong robust aluminium legs that fold into the top for easy transportation. With a plastic top and non-slip rubber feet for added security and stability. Side latches are used to fasten two saw horses together for a wider work surface for door trimming, decking laying etc. Supplied as a Twin Pack. Specification: Max. Load: 340kg per pairWidth: 97cm (37in)

The Stanley FatMax 1-92-980 Telescopic Sawhorse features adjustable telescopic legs, that are ideal for use on difficult and uneven surfaces. The height is adjustable to a maximum of 1025mm with up to 215mm extension on each leg. The heavy-duty metal legs allow a high load-bearing capacity of 1135kg (2500lbs per pair) and they only weigh 5.25kg each (12lbs) so they are light and easy to carry. The bi-material feet are made out of aluminium-polypropylene and they can be adjusted individually. Supplied as a Twin Pack. Specification: Max. Load: 1135kg (2500lbs) per pair

The Stanley Tools Essential Metal Sawhorse has an all-metal construction that allows use with clamps. They are easy to open and close, they fold down into a compact size and both of the sawhorses can also be clipped together, making them extremely easy to transport. Fitted with rubber feet that create friction on the surface during cutting, for added security and stability. Supplied as a Twin Pack. Specification: Max. Load: 340kg per pair

The Stanley Tools FatMax Express Folding Workbench is ideal for professional tradesmen who require a robust, portable working surface with substantial material capacity. This versatile and ergonomically-engineered workbench has been designed with a spacious work platform (85 x 60cm) suitable for a host of pro applications, including hand and electric sawing, drilling, screwdriving, gluing, precision woodworking, spray painting, part cleaning, and all jobs that require materials to be fixed securely into place. Compatible with an extensive range of vertical and horizontal clamps, including the STANLEY FATMAX Trigger Clamp series, the Express Folding Workbench features a series of dog bench holes and x-shaped grooves, allowing straightforward clamping of wood, metal or plastic items at any angle. Thanks to its quick collapsing, durable metal legs, the FATMAX Express Folding Workbench can be easily set up in seconds and is exceptionally solid and stable, supporting up to 455kg of material. Once each job is finished, the user can fold the workbench effortlessly into a compact unit for easy storage or transportation to the next working location. Two sturdy handles, one on the side and one at the end, add to its portable construction. Specification Max. Load: 450kgSize Open (WxDxH): 101x60x78cmSize: Folded (WxDxH): 85x60x11cmWeight: 10.4kg

The Stanley 70-713 Folding Sawhorses with a robust polypropylene structure and integrated grooves to hold and clamp materials and top rubber pads/points to prevent materials slipping. They also feature a tool tray to hold power tools and hand tools and side cable hangers. Supplied as a Twin Pack. Specification: Max. Load: 450kg per pair

The Stanley 170355 Junior Sawhorses have an all plastic construction with Non-slip rubber inserts in the top for added grip when working on the project in hand and non-slip rubber feet for added stability and safety. The saw horses will fold flat for easy transportation and storage. Supplied as a Twin Pack. Specification: Max. Load: 362kg per pairDimensions (LxWxH): 571 x 48 x 820mm

The Roughneck Logger's Mate Saw Horse is lightweight and easy to assemble sturdy saw bench that packs flat for easier storage and transportation. It can be erected and dismantled in seconds. It has a vice-like grip to hold logs and timber at the perfect height for cutting. Ideal for cutting logs, branches, timber, fence posts, beams etc. Holds logs and timber from 50mm to 240mm diameter and up to 4m long. Max Timber Weight: 150kg.

The Faithfull FAITRESTLESP is a pair of plastic trestles which fold flat for easy storage and transportation. The top features flip-up safety pegs to secure the workpiece and rubber inserts to prevent the workpiece slipping. They have non-slip rubber feet. Specifications: Height: 82 cm (32.1/4in).Length: 57 cm (22.1/2in).Width: 3cm (1.1/4in).Maximum recommended capacity: 158kg (348lb) per pair.

This Faithfull FAITRESTLES are a pair of trestles with slip resistant worktops and securely locking legs for improved stability. Each trestle has a safe working load of 200kg (440lbs) and folds flat for easy storage and an integral handle allows easy transportation. Specifications: Height: 78cm (31in).Length: 100cm (39in).Width: 10cm (4in).Maximum recommended capacity: 400kg (880lb) per pair.

The Faithfull Sawhorse Folding Trestle Galvanised has a non-slip, serrated supporting surface with a high load bearing capacity of up to 150kg. It is ideal for holding large logs and timber, perfect for use with chain saws, sabre saws and hand saws.It has a galvanised finish for rust protection and has a strong, stable, angled steel profile. This sawhorse folds flat for compact easy storage. It requires assembly before use. Full instructions included. Specifications: Capacity: 150kg.Size Folded: 100 x 81 cm.

DEWALT DE7035 Heavy-Duty Work Support Stand has an ideal size and weight (only 7kg), making it perfect for easy transportation. It is versatile and durable under load, with a 454kg capacity. It is easy to set up, pack away, and store due to its strong compact design. Can be used in different configurations for application versatility, material support and storage and also used with mitre saws and plunge saws.

The DEWALT DWST1-75676 pair of full metal saw horses are fitted with trigger clamps for vertical clamping and V-groove supports for round profiles and pipes. They are highly portable due to their flexible handles for easy transportation and side locking latch, that prevents the unit from opening accidentally. The sturdy metal legs and frame offer a load capacity of up to 900kg and the fitted rubber pads help to create friction on surfaces while cutting. Specification Capacity: 900kg.Depth: 120mm.Height: 1117mm.Width: 135mm.Weight: 11.3kg.

The BLACK DECKER WM825 Dual Height Deluxe Workmate has an exclusive, advanced one-handed clamp system which allows the clamps to be adjusted together or independently. The front jaw swings up for vertical clamping, increasing flexibility to clamp odd-shaped objects with the dual working heights allowing for use as a workbench, bench tool stand, vice, or sawhorse. Its heavyweight steel construction allows support of 250kg and the folding frame allows for compact storage and easy transport with the dual clamping cranks increasing clamping force and versatility. It has adjustable swivel pegs and jaw retention grooves which provide clamping versatility and reliable material hold and has been designed for easy set-up and clean-up with rubber feet which are anti-slip and 3 vice jaw positions for versatility. Applications: Holds virtually anything, Bench tool stand, Vice for cutting, painting, etc., Workbench, Sawhorse Specification Vice Jaw Opening: 0 - 205mmWorking Height: 800/620mmVice Jaw Length: 740mmTable Width: 384mmMax Table Width, Jaws Open: 541mmFolded Size: 830 x 740 x 200mmMax. Load: 250kg

The BLACK DECKER WM626 Tough Dual Height Workmate can be used as a workbench, bench tool stand, vice, or sawhorse. With a durable steel frame construction that folds flat for compact storage and easy transport. Dual clamping cranks increase clamping force and versatility. Designed for easy set-up and clean-up. Adjustable swivel pegs and jaw retention grooves provide clamping versatility and reliable material hold. Fitted with rubber feet that are anti-slip. Specification: Vice Jaw Opening: 0 - 136mmWorking Height: 775/595mmVice Jaw Length: 740mmTable Width: 384mmFolded Size (WxHxD): 742 x 740 x 200mmMax Load: 250kg

The BLACK DECKER WM536 Dual Height Workmate can be used as a workbench, bench tool stand, vice, or sawhorse. It has two working heights and a fixed position vice jaw.The working top is made from particle board and is supplied with adjustable pegs which enable it to hold irregular shaped objects.The WM536 has rubber anti-slip feet, it folds flat for compact storage and for easy transport. It is made of durable steel construction. Specifications: Vice Jaw Opening: 0 - 136mm.Working Height: 775/595mm.Vice Jaw Length: 610mm.Table Width: 384mm.Max Load: 250kg.

The BLACK DECKER WM301 Workmate Bench has a durable steel frame construction and folds flat for compact storage and easy transport. The dual clamping cranks increase the clamping force and offers versatility with the adjustable swivel pegs and jaw retention grooves provide clamping versatility and reliable material hold. It has been designed for easy set-up and clean-up with rubber feet which are anti-slip. Specification: Vice Jaw Material: Compressed BambooVice Jaw Opening: 0 - 115mmWorking Height: 760mmVice Jaw Length: 610mmTable Width: 341mmMax. Load: 160kg

The Armorgard TuffBench™ is a durable workbench, suitable for use on construction sites as a temporary work platform. The surface is manufactured from sustainable pressed timber, designed to be long lasting, making it simple to attach working tools (for example vices and pipe threaders etc.). The legs can be folded up, which means it is a considerably smaller unit to store and makes it easier to move around site. A chain and clip are used to hold them back when in the folded position. There are no detachable parts, meaning there are no bits to lose during transportation. The frame has been powder coated to maximise usability. Specification; External Dimensions: 1080 x 750 x 820mm.Folded Dimensions: 1080 x 750 x 130mm.Weight: 28kg. 62lbs.

This Stanley Tool Pouch is manufactured from tough 600 denier fabric and has a padded back for extra comfort. In addition, it has integrated metal hammer loop and multiple pockets, and loops for maximum organisation.Specification: Size: 235 x 332 x 75mm.

This Stanley Personal Pouch is made of hardwearing, strong and durable 600 x 600 denier fabric. It is fully adjustable to fit different belt sizes. It has a convenient pocket for personal belongings, a GPS/Mobile phone pocket and a large closed zipper pocket. It is suitable for all essentials.Specification: Size: 240mm x 155mm x 60mm.

The Stanley Tool Apron is made from hard-wearing, strong and durable 600 x 600 denier fabric. It has multiple pockets and loops to provide maximum organisation. The size and structure of these pockets allows for easy access.The tool belt comes complete with a tape pocket and an integrated hammer loop to keep these tools at convenient reach. In addition, it has ergonomic back padding for safety and comfort. Specification: Dimensions: 600mm x 255mm x 75mm.

The STANLEY 1-93-601 Tool Rollis made from durable 600 denier fabric. Contains 12 pockets for various sizes of tools and ties for convenient and safe storage. Specification: Pockets: 12Dimensions: 38.5 x 64cm

The Stanley 1-93-329 Pouch is made from heavy-duty 600 denier fabric which is double layered and riveted for extra durability. It has a large, uncovered pocket and two covered pockets for convenient tool storage. Supplied WITHOUT tools.

The Stanley Tools STST1-80118 Leather Drill Holster is suitable for left and right-hand users. With specially designed pockets for bit and drill organisation. Made from professional, high-grade leather (suede) with a leather strap that holds the drill securely in place. Fits on any generic belt.

The Stanley Tools Hammer Holder has a metal hammer loop that is comfortable to reach. Made from professional, high-grade leather (suede) with rivet reinforced stress points and a wide belt slot.

The Stanley Tools Leather Double Nail Pocket Pouch is perfect for nails and small tools. With easy access pockets, the size and structure of pockets enable easy access. There is also a metal, quick access tape holder. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.

The Stanley Tools Leather Nail Hammer Pouch has multiple, easy access pockets and holders for quick access on the job. Fitted with a metal hammer loop that is a comfortable to reach. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.

The Stanley Tools Leather Tool Apron has multiple pockets and holders for quick access on the job. The middle pocket is ideal for holding pocket tapes and there is also a steel hammer loop. Made from durable leather with rivet reinforced stress points. The apron has a sturdy, adjustable belt and a durable metal buckle. With an easy to use belt with roller buckle. The belt is perforated to suit all waist sizes from 83-133cm.

The Kuny's SW-1504 Carry All Tool Pouch is made from tough polyester fabric. It has 9 pockets in total - 7 internal pockets inside the zipped compartment and 2 external pockets. In addition, the tool pouch has 5 web loops for extra carrying capacity. Its carabiner is ideal for carrying keys, small tools etc. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's SW-1105 5 Pocket Phone Tool Holder is made from polyester fabric and ballistic nylon. The mobile phone, tool and accessory holder you can HANG or STRAP or CLIP on work belts, web braces, trousers etc. Securely holds small tools and accessories like pliers, mini-flashlights etc. Versatile 3-way attachment feature. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's Cordless Drill Holster made from a double layer of rugged lightweight fabric. Holds most brands of cordless drills and has multiple outer pockets and sleeves for complete drill bit organisation. Safety strap with quick-release buckle. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's SG-5021 Impact Driver Holster made from polyester fabric and designed to suit 10.8V to 18V Impact Guns. It has adjustable straps and quick release buckle and a hook and loop backing to keep the security strap out of the way when in use. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's PL-99 Multi Pocket Tool Phone Holder has a durable polyester construction. Attach to belt with snap closure or carry securely in pocket with padded flap. It has 4 pockets and one padded pocket with elastic binding. Designed to fit most compact mobile phones. With a webbing slot for small flashlight or other tools. Fitted with a detachable electrical tape sling. Fits belt sizes up to 63.5mm (2.1/2in) wide.

The Kuny's PL-767P Plier / Tool Holder is made from a double layer of rugged lightweight fabric. Fits narrow type hand tools up to 250mm (10in) long and has a carabiner loop holder. Fits belt sizes up to 70mm (2.3/4in) wide.

The Kuny's PL21 Utility Knife Pliers Holder is made from heavy-duty leather. With an all-rivet construction. Slots to fit 51mm (2in) wide belt. Fits most standard utility-style trim knives and pliers. Dimensions: 216 x 64mm (8.1/2 x 2.1/2in).

The Kuny's PH-38 Miscellaneous Tool Pouch is made from heavy-duty rivet reinforced leather. Designed to fit assorted utility items such as pens, markers, tape, utility knife etc. It has 2in wide belt slots.

The Kuny's HM220 Leather Snap-in Hammer Holder is made from heavy-duty leather. The cradle design keeps the hammer secure, whilst the swing feature keeps the hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.

The Kuny's HM219 Leather Swing Hammer Holder is made from heavy-duty leather and steel. The cradle design keeps the hammer secure, whilst the swing feature keeps the hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.

The Kuny's HM213 Leather Hammer Holder is made from heavy-duty leather. The cradle design eliminates hammer pivoting. Fits belt sizes up to 70mm (2.3/4in) wide.

Large rivet reinforced tape holder made of durable fabric and a heavy-duty clip on the back. Fits belt sizes up to 70mm (2.3/4in) wide.

The Kuny's HM1214 Large Tape Holder is made from heavy-duty leather. With an all-rivet construction. Designed to fit tapes up to 8 metres. Overall Dimensions: 171 x 114mm (6.3/4 x 4.1/2in).

The Kuny's EL1509 Professional Electricians Zip Pouch is made of polyester fabric and ballistic binding. Zippered top flap prevents loss of tools when carrying (or not in use). With ergonomic rubber handle and padded shoulder strap design for easy storage and the ideal way to carry the loaded tool pouch. Three outside large screwdriver holders and outside pocket to hold mobile phone holder.

The Kuny's EL-1503 Electrician's Pouch made from tough polyester fabric which can be attached to a belt via the belt loop or the heavy-duty snap clip on the back. The pouch has nine pockets - three internal pocket sleeves and six external pockets. With handy sling to carry electrical tape. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's drywall Pouch with no hammer holder loop. Ideal for use when fitting plasterboard as there are no hard surfaces to cause damage. Made from durable split grain leather. Three pouches. (Large, Medium and Small) reversed for easy access. Rivet reinforced at all stress points. Fits any belt up to 76.2mm (3in) wide.

The Kuny's I933 Carpenter's Nail Tool Bag is made from heavy-duty leather. The bag has 10 pockets, including: 2 x main nail and tool pockets.2 x additional upper pockets.6 x smaller pockets to fit pliers, nail sets, pencils etc. The bag also has a metal clip that holds all measuring tape sizes and a hammer loop. It will fit belt sizes up to 70mm (2.3/4in) wide.

The Kuny's Journeyman Carpenter's Half Apron made from split grain leather. Large and small reversed nail pockets for easy access. Heavy steel hammer holder. Three smaller pockets for utility knife, pencils or markers. Rivet reinforced at all stress points. Fits belt sizes up to 76.2mm (3in) wide.

The Kuny's AP661 Split Grain Water Repellent Tool Belt is made from heavy water repellent split grain leather. Five reversed nail pockets for easy access (two large and three small). Deep centre pockets for tapes or other tools. Two heavy steel hammer holders with six smaller pockets for pencils, utility knife, markers etc. Heavy-duty belt with roller buckle and double riveted at all stress points. Fits waist sizes: 29 to 46in.

Kuny's Journeyman Carpenter's Apron is made from heavy-duty leather, with reinforced stress points. Heavy leather belt with roller buckle. 5 Reversed nail pockets for easy access (2 large and 3 small).- Deep centre pocket for tape etc. - 2 Heavy steel hammer holders.- Extra pockets for pencils, markers etc. Fits waist sizes: 29 to 46in.

The Kuny's AP-622a Carpenter's apron is made from durable split grain leather with contrasting black stitching, rivets and hammer holders. It has carry handles to allow easy handling/storage and a 2in wide heavy nylon belt with double rivets at all stress points. - 5 Reversed nail pockets for easy access. - 2 Large and 3 Small. - Deep centre pocket for tape etc.- 2 Heavy Steel Hammer Holders. - 6 Utility pockets for pencils, markers etc. Please Note: - Tools NOT included

The Kuny's AP-527X Heavy-Duty Leather Work Apron is made from heavy-duty suede leather. It has 12 pockets, including: four main nail and tool pockets, six smaller pockets (for pliers, nail sets, pencils, etc.), a centre pocket for tape measure, nails or other tools and a leather combination square holder. In addition, the apron features 2 hammer hooks. Has double gussets which help to keep front pockets wide open for easy access. Its 52mm (2in) wide polyweb belt has a roller buckle. Fits waist sizes: 29 to 46in.

The Kuny's Journeyman Half Apron is made from all weather logger tan leather and features a back wall pocket and side tool holder. Comprises extra large main pouch with large reversed front pouch, easy accessible top pouch together with three small utility pockets, three back wall pockets and additional side tool slots for other tools. Fits belt sizes up to 88.9mm (3.1/2in) wide.

The Kuny's 5 Pocket Framers Nail and Tool Bag with Polyweb Belt, made from 600D Polyester fabric and 1680D ballistic nylon binding. With speed square holder, metal clip which holds all measuring tape sizes and steel hammer loop. Four pockets for nails, tools etc with 52mm (2in) wide polyweb belt with a quick-release buckle. Fits waist sizes: 29 to 46in.

The Kuny's 12 pocket Apron is made from 600D polyester fabric and 1680D ballistic nylon binding. It has four main nail and tool pockets and six smaller pockets for pliers, pencils, nail sets, etc. It has a 52mm (2in) wide web belt with a steel buckle. Fits waist sizes: 29 to 46in.

Kuny's Carpenter's Apron made from heavy-duty suede leather with a 50mm/2in wide heavy-duty nylon web belt with metal twist-lock buckle, metal hammer loops and reinforced at all stress points. With 3 reversed nail pockets for easy access, (2 large and 1 small) and a centre pocket for tape or tools and 2 small pockets for easy access tools. Fit waist sizes: 29in to 40in.

This Kuny's Construction Apron is made from oiled top grain leather. It has 4 main reversed nail and tool pockets and 6 smaller pockets to fit pliers, nail sets, pencils, etc. In addition, it has a centre pocket which is ideal for tape, nails or other tools and a moulded leather holder which fits a combination square, and a metal snap-in hammer loop. The apron has a 2in wide heavy-duty leather belt with a double-tongue roller buckle. Fits waist sizes: 29 to 46in.

Faithfull Webbing Belt with a buckle fastening. Belt length can be adjusted for the perfect fit. Use with any combo of pouches or holsters.

This Faithfull Tool Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sizes of tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. Specification: Pockets: 15Dimensions: 32 x 77cm

The Faithfull Single Tool Nail Pouch, made from heavy-duty leather, double stitched and with rivet reinforcement at stress points. Has a belt loop for belts up to 2in wide. Has two large pockets for nails, three pockets for small tools and a hammer loop. Specification Size: 250 x 280mm (10 x 11in)

The Faithfull Double Scaffold Spanner Holder is made to a high specification using quality heavy-duty hide. This Faithfull holder is made to last and provide dependable service. It has two loops for scaffold spanners or socket bars, the holder will fit most belts. Specification: Size: 150 x 100mm (6 x 4in).

The Faithfull Scaffold Level Holder, made to a high specification using quality heavy-duty split suede. Made to last and provide dependable service. Single pocket for small spirit level. Looped for attachment to a separate belt. Fits belt width up to 60mm. Size: 270 x 90mm (10.1/2 x 3.1/2in).

Faithfull NP2 Nail Pouch made from heavy-duty suede and divided into two pockets. Double stitched for strength and rivet reinforced at stress points. Complete with webbing belt. Size: 250 x 380mm (10 x 15in)

The Faithfull Single Pocket Nail Pouch has been made to a high standard using heavy-duty split suede. Top edged and stitched large pocket with stress points that are rivet reinforced for durability. Looped for attaching to a separate belt. Size: 240 x 220mm (9.1/2 x 9in)

The Faithfull 10 Pocket Leather Tool Roll is manufactured from high-quality leather. Contains ten pockets of various sizes and is ideal for storing small tools such as chisels, auger bits, screwdrivers and spanners. It has a stud fastening system for ease of use.

This Faithfull Chisel Roll is made from water-resistant, high-quality suede leather which is double stitched at stress points. Fitted with a long ribbon tie. Suitable for chisels and other small tools. Specification: Pockets: 8Dimensions: 33 x 47cmDepth: 100mm

The Faithfull Swivel Hammer Holder has a base made from quality hide leather, to last and provide dependable service. The steel swivel ring accommodates most hammers and adjusts to suit the body angle. Fits most belts. Specification: Size: 150 x 100mm (6 x 4in).

This Faithfull End Cutter Pliers Holder is made from high quality hide leather to last and provide dependable service. Its steel fitment is designed to hold end cutting steel erectors pliers and similar cutters. Fits most belts. Specification: Overall Size: 150mm x 100mm (6 x 4in).

Faithfull Double Tool Nail Pouch made from heavy-duty leather this tool pouch is double stitched for strength and riveted at stress points. It has a webbing belt and 10 pockets for tools and nails, tape clip and two hammer loops. Specification Fits waists sizes: 29 to 46inSize: 215 x 500mm (8.1/2 x 20in)

This Faithfull Chisel Roll has the following specification: Pockets: 8Dimensions: 32 x 50cm

This Faithfull Chisel Roll has the following specification: Pockets: 12Dimensions: 33 x 68cm

This Faithfull Bit Roll has the following specification: Pockets: 9Dimensions: 27 x 42cm

This Faithfull Bit Roll has the following specification: Pockets: 13Dimensions: 27 x 55cm

The DEWALT DWST1-75662 Hammer Loop has a rustproof metal loop that fits most hammers. It is made from a strong durable polyester fabric, 1200 denier, with metal rivets for extra reinforcement.

The DEWALT DWST1-75653 Drill Holster features a leather strap and quick-release buckle to hold the drill securely in place, and has been designed for left-handed or right-handed users.The holster is made from a strong, durable polyester fabric, 1200 denier, with leather pockets for drill bit organisation. It also has a metal d-ring to hang additional tools safely, and has added leather pockets and elastic loops to hold bits, chuck keys, drivers, etc.The drill holster fits on any DEWALT tool belt or generic belt. Specifications: Length: 160mm (6.3in).Width: 60mm (2.4in).Maximum load weight: 15kg (33.1 lb).

The DEWALT DWST1-75652 Hammer and Nail Pouch combines two useful pouches into one item. It is made from a strong, durable polyester fabric, 1200 denier, and has metal rivets for extra reinforcement and extra leather on high friction points.The pouch has a rugged PVC bottom cover to protect it from wear and tear. DEWALT organiser cups can fit into the nail pockets, for easy transfer from storage box to belt.There are multiple size pockets and loops for maximum organisation of tools and small parts. The large zippered pocket is suitable for all essentials like a wallet, keys and phone.A specially designed pocket and loop offer maximum protection for a jab saw. It also has an integrated metal clip tape holder, external screwdriver leather holders, and extreme-duty metal hammer loop for easy access to your hammer. Specifications: Length: 275mm (10.8in).Width: 125mm (4.9in).Maximum load weight: 25kg (55.1 lb).

The DEWALT DWST1-75651 Tool Belt is an ergonomic padded belt with breathable mesh for maximum comfort when holding heavy loads. The belt is made from heavy-duty leather and a strong, durable polyester fabric, 1200 denier.The DEWALT belt is fully adjustable to suit all waist sizes and the 2-pin belt buckle ensures the belt is tightly secured, and can carry heavy loads. Also included are steel d-ring hangers for use with braces.It is a customisable tool belt, and can be used with any combination of the DEWALT pouches or holsters.Specifications: Length: 1400mm (55.1in).Width: 20mm (3/4in).

The DEWALT DWST1-75650 Nail Pouch is made from a strong, durable polyester fabric, 1200 denier. The pouch has metal rivets for extra reinforcement, and extra leather on high friction points.This DEWALT product has a rugged PVC bottom cover, to protect from wear and tear. DEWALT organizer cups can fit into the nail pockets, for easy transfer from storage box to belt.The front pockets have been double-reinforced for extra capacity and easy access. The multiple size pockets, and loops for maximum organisation of tools and small parts. The large zippered pocket is suitable for all essentials like a wallet, keys and phone.A specially designed pocket and loop offer maximum protection for a jab saw. Also, the nail pouch has an integrated metal clip tape holder, external screwdrivers leather holder, and an extreme duty metal hammer loop.Specifications: Length: 320mm (12.6in).Width: 160mm (6.3in).

The DEWALT DWST1-75552 Tool Apron is the perfect tool rig system combining a multi purpose pouch, a drill holster, a hammer loop, and can be personally fitted and customised for the users' needs.Designed for left or right handed users, there is an ergonomic padded belt with a breathable mesh for maximum comfort when holding heavy loads.At its core, there is a heavy-duty leather reinforced belt with 2-pin belt buckle ensuring the belt is tightly secured, and suitable to carry heavy loads.The belt is fully adjustable to suit most waist sizes, and includes steel d-ring hangers for use with braces.All the pouches are made from strong, durable polyester fabric, 1200 denier, and have extra leather on high friction areas.Specifications: Length: 1400mm.Width: 160mm.

The DEWALT DWST1-75551 Multipurpose Pouch is made from a strong, durable polyester fabric, 1200 denier. With metal rivets for extra reinforcement and extra leather on high friction points. The pouch has a rugged PVC bottom cover, to protect from wear and tear. There are multiple size pockets and loops for maximum organisation for tools and small parts. The large zippered pocket is suitable for all essentials like a wallet, keys and phone. A specially designed pocket and loop offer maximum protection for a jab saw. It also has an integrated metal clip tape holder and an external leather holders for screwdrivers. For use with the DEWALT Tool Belt (DEW175651), but will fit most belts.