1 x Faithfull Nylon Hammer Replacement Face 32mm

1 x Faithfull Nylon Hammer 32mm (1.1/4in)

A traditional bricklayers tool with a double point. The hardened point is used for raking out weathered mortar joints and for digging out in clay, shale, sand or chalk, Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Always use the correct hammer for the job.

A traditional bricklayers tool with a chisel and point. The hardened point is used for raking out weathered mortar joints and for digging out in clay, shale, sand or chalk, while the chisel end is used for dressing or removing redundant mortar from bricks. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Always use the correct hammer for the job.

The Faithfull bricklayers mortar pick available with double point.The point is used for clearing out old weathered mortar prior to re-pointing. Fitted with a hickory handle.

The Faithfull Bricklayer's Chisel and Point Mortar Pick. Its hardened point is used for raking out weathered mortar joints prior to repointing. The chisel end is used for dressing or removing mortar from bricks. Fitted with a hickory handle.

Head Weight: 227g (1/2 lb).

Weight: 450g (1 lb).

Head Weight: 340g (3/4 lb).

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle. Kit consists of 2 Steel Wedges : 12mm Width (Size 1)1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb 2 Steel Wedges : 15mm Width (size 2)1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs 2 Steel Wedges : 18mm width (size 3)1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4)1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbs Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Faithfull Walling or Masons Hammer has one large striking face and the other end ground into a long tapered horizontal chisel end that is used for dressing stone. Fitted with a hickory handle.

Supplied in kits, these Faithfull Hammer Wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Each kit includes two malleable steel hammer wedges and one wooden wedge. When fitted correctly they provide a secure and safe attachment of a striking head to a wooden handle. Please note: hammer wedges are NOT suitable for use with fibreglass replacement handles. The kit contains: 2 x Steel Wedges: 18mm width (size 3)1 x Wooden Wedge: 62 x 65 mm Suitable for axe heads of all weights.

The Faithfull Slater's Hammer is a pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head.Fitted with a traditional hickory handle.

The Faithfull Boiler Scaling Hammer, specially designed for removing deposits and scale from metalwork. The head is ground to a chisel shape, one end vertical and the other horizontal to the handle. Fitted with a hickory handle. Weight: 450g (16oz)

Size: 3170g (7 lb)

Length: 900mm (36in)

Size: 760mm (30in)

Length: 600mm (24 in)

Weight: 45430g (10 lb)

This Faithfull geologist's hammer or geological pick is used for splitting and breaking rocks. In field geology, they are used to obtain a fresh surface of a rock in order to determine its composition, nature, mineralogy, history and field estimate of rock strength. In fossil collecting, they are employed to break rocks with the aim of revealing fossils inside. Used by geologists for taking samples in the field. This pick has one large square striking face and the other end is ground to a point for splitting, cracking and levering. Hickory handle.Weight: 620g (1 lb 6oz).

Length: 405mm (16 in).

Length: 300mm (12 in).

Weight 1130g (2.1/2 lb)

Weight: 3170g (7 lb)

1 x Faithfull Club Hammer Long Shaft Fibreglass Handled 1.81kg (4 lb).

1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4 lb).

1 x Faithfull Club Hammer Fibreglass Handled 1.13kg (2.1/2 lb).

Weight: 4530g (10 lb)

The Faithfull Bricklayer's Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture.Also available are replaceable one inch scutch combs or chisel bits (droves).; SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Remember that left for a long time in very dry conditions, wood can dry out. Always check to ensure that this has not happened to your handle.Always use the correct hammer for the job.

Faithfull Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a traditional hickory handle. Replaceable comb (FAISC1N) and chisel (FAICB1N) bits 25mm (1in) are available separately.

1 x Faithfull Dead Blow Black PVC Hammer 900g (2 lb)

1 x Faithfull Dead Blow Black PVC Hammer 680g (1 lb 8oz)

The Faithfull Cross Pein is a small versatile hammer, also known as a telephone hammer. Designed for accurate installation of precision fixings, such as clips, panel pins etc. Fitted with a hickory handle.

The Faithfull Carver's Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.

Size: 127mm (5in) Weight: 540g

Size: 115mm (4.1/2in) Weight: 470g

Size: 100mm (4in) Weight: 430g

Weight: 227g (8 oz).

Weight: 570g (1 1/4 lb)

Weight: 450g (1 lb)

Weight: 227g (1/2lb)

Weight: 570g (1 1/4 lb)

Weight: 450g (1 lb)

Weight 570g (1 1/4lb)

Weight 450g (1 lb)

Weight 227g (1/2 lb)

Weight 1360g (3 lb)

Weight: 1360g (3 lb)

Weight: 1130g (2.1/2 lb)

Weight 113g (1/4 lb)

Weight 900g (2 lb)

Weight: 900g (2 lb)

Weight 680g (1.1/2 lb)

Weight: 680g (1.1/2 lb)

Weight 454g (16oz)

Weight: 450g (1 lb)

Weight: 340g (3/4 lb)

The Estwing EMRWT Surestrike tack hammer has a hickory shaft. Small 5oz (140g) head for striking tacks.

The Estwing EMRW-3LB Surestrike drilling hammer has a forged steel head, a fully polished face and genuine top grade hickory handle. Weight: 1360g (3 lb).

The Estwing Surestrike straight claw framing hammer has a forged solid steel head and a genuine top grade hickory handle. Weight 700g (1lb 9oz)Milled face

Surestrike curved claw hammer with a smooth faceand a hickory handle.Weight 570g (1 1/4 lb)

Weight 570g (1 1/4 lb)

Weight 450g (1 lb)

Weight 570g (1 1/4lb)

Weight 450g (1 lb)

Weight: 1810g (4 lb).

Weight: 1360g (3 lb).

Weight: 900g (2 lb).

This Estwing Ultra Series Framing Hammer is solid forged in one piece of steel for excellent strength and engineered lighter to drive nails faster. There is an extra nail notch built into the head, along with a magnetic nail starter. The milled face aids gripping of the nail head when striking and the handle has Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA. Specification: Weight: 540g (19oz)Handle Length: 349mm (15.1/2in)

These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA from high-quality steel. Weight: 540g (19oz).Handle length: 349mm (15.1/2in).

The Estwing Ultra Series Claw hammers are one-piece forged and are engineered lighter to drive nails faster. This hammer has an extra nail notch built into the head and a smooth face, along with a magnetic nail starter. It has Estwing's world famous blue shock reduction nylon vinyl grip. Made in the USA from high-quality steel. Specifications:Weight: 425g (15oz).Handle length: 343mm (13.1/2in).

Weight 850g (1 lb 14oz)

Weight 790g (1 3/4 lb)

Weight 680g (24oz)

The Estwing Big Blue Straight Claw Framing Hammer is designed for frame work.The long handle is for greater impact when striking a nail.The handle grip is made from liquid vinyl, bonded on to an all-steel shaft during production. Blue shaft. Weight 700g (1 lb 9oz).Length 460mm (18in).

Weight 680g (1 1/2lb).

Weight 680g (1.1/2 lb)

The Estwing E3/239MM hammer is designed for the roofing trade. It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised, recessed head for starting nails accurately.It is one piece forged with Estwing's world famous shock reduction grip.

Weight 620g (1 lb 6oz)

The Estwing E322P square section rock pick hammer has a flat face at one end and a pick at the other.Used by slaters or geologists it has a liquid vinyl grip handle bonded on to the shaft during production for added grip and comfort. These Estwing high quality chisel geological hammer picks use the strongest steel which is forged in one-piece. The strongest known construction of its type. A tool designed for the geologist when working with rock or rubble. Weight: 620g (1 lb 6oz)

Weight 560g (20oz)

Weight 570g (20oz)

Weight 570g (1.1/4 lb).

Weight 450g (16oz)

Weight 450g (16oz)

The Estwing E3/11 dry wall hammer has a cushioned vinyl grip and solid one piece forged construction. Crowned, scored hammer head which reduces the likelihood of impact marks on the plasterboard. Cutaway and notched cutting blades for withdrawing nails and cutting laths. Head Weight: 400g (14oz)

Weight: 680g (1 1/2lb).

Smooth faceLeather gripWeight 620g (1lb 6oz)

Milled faceLeather gripWeight: 620g (1lb 6oz).

Weight 570g (1 1/4lb)

Weight 570g (1 1/4lb)

These Estwing Ultra Series Framing Hammers are solid forged in one-piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have a traditional leather handle grip made from leather washers pressed on and riveted. The milled face aids gripping of the nail head when striking. Made in the USA from high-quality steel. Weight: 540g (19oz)Handle length: 349mm (15.1/2in).

These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have a traditional leather handle grip made from leather washers, pressed on and rivetted. Made in the USA from high-quality steel. Weight: 540g (19oz)Handle length: 349mm (15.1/2in).

Weight 450g (1 lb)

Weight 450g (1 lb)

The Estwing Ultra Series Claw hammers are one-piece forged and are engineered lighter to drive nails faster. An extra pulling notch is built into the head, along with a magnetic nail starter. This hammer has a traditional leather handle grip made from leather washers pressed on and riveted. Made in the USA from high-quality steel. Specifications: Weight: 425g (15oz).Handle length: 343mm (13.1/2in).

1 x Britool E150108B Ball Pein Hammer 454g (16oz)

Bahco Bricklayers Hammer with anti-slip striking face and nail puller. Has a tubular steel shaft with comfortable grip. Weight: 600g (1.1/4 lb).

Weight 570g (1 1/4lb)

Weight 450g (1 lb)