Replaceable sanding sheet designed for use with Marshalltown Vacuum sander model VS733.220 grit

Replaceable sanding sheet designed for use with Marshalltown Vacuum sander model VS733.120 grit

The Marshalltown M897 Eggbeater Mixer is ideal for stirring and blending paint and drywall mud quickly and lump-free. This mixer will fit the average drill size at an optimum speed of 500-900 rpm. Length: 762mm (30in)Shaft: 7/16in Hex

The Marshalltown MDR-390 Drywall Rasp without rails. It has a stainless steel blade. Fitted with a DuraSoft handle for comfort. Specification Size: 140mm (5.1/2in).

Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in

This Marshalltown Brick Tong is designed to make carrying bricks easier. Maintenance free and of a heavy-duty design for hard wear and tear, the brick tong is adjustable to carry between 6 to 10 bricks.Size 154 x 422 x 76mm.Weight: 1.42kg.

Size 10 and 12mm (3/8 X 1/2 in).

Size 16 and 19mm (5/8 and 3/4 in).

M819 Plasterers quik mix is a time and energy saving mixer. It is ideal for stirring plaster, for mixing aggregate and other materials. It will fit into any conventional 3 jaw chuck with a 13mm (1/2in) or larger capacity. Blade size: 212 x 115mm (8.1/4 x 4.1/2in).

This Marshalltown Plaster Pan is used to hold material while you work, designed to make it easy to clean trowels, and not have material get stuck in the corners. It is made of hard-wearing plastic with a hang tab, and is equipped with two metal wiping blades. The pan will resist chemicals and temperature change.Size: 325 x 75mm (13 x 3 in).

This Marshalltown Plaster Pan is used to hold material while you work, designed to make it easy to clean trowels, and not have material get stuck in the corners. It is made of galvanised steel construction and has tapered ends, and sides with mud tight seams. The sides of the pan are sheared to clean knives easily.Size: 300 x 75mm (12 x 3 in).

Size 19 and 22mm (3/4 and 7/8 in).

Size 12 and 16mm (1/2 and 5/8 in).

This Marshalltown Drywall Board Lifter is a handy device used to lift doors, or board, into position. The tapered front-end slides easily under the board then lifts, and holds in place while nailing. It comes with a non-slip checked surface provides foot traction. It also has a self-righting feature making it ready to use without fumbling.Size: 12 x 5.¼ in (300 x 130mm).

Size 300mm (12 in)

Size 200mm (8 in)

The Marshalltown M-T5763 Joint knife has the following dimensions:Size: 150mm (6 inch)

The Marshalltown M-T5743 Joint knife has the following dimensions:Size: 100mm (4 inch)

The Marshalltown M4510SD Taping Knife has a premium tempered stainless steel blade with rigid alloy backer. The blade is tapered for easier use in tight corners. Fitted with a narrow profile DuraSoft handle with ergonomic contours for improved comfort and blade control. Size: 250 x 76mm

Marshalltown M3512DS Taping Knife is made from Stainless Steel. Size: 300 x 75mm (12 x 3in).

The Marshalltown M3512D BTaping Knife is made from blued steel. Size: 300 x 75mm (12 x 3in).

The Marshalltown M3510DS Taping Knife is made from Stainless Steel. Size: 250 x 75mm (10 x 3in)

Marshalltown M3510D Taping Knife is made from blued steel. Size: 250 x 75mm (10 x 3in).

The Marshalltown M3508DS Taping Knife has a premium tempered stainless steel blade mounted in a rigid alloy back. The blade is tapered for easier use in tight corners. Ergonomic contoured Durasoft handle for improved comfort and control.

The Marshalltown M3508D Taping Knife is made from blued steel. Size: 200 x 75mm (8 x 3in).

The Marshalltown M28393 Drywall Patch has an aluminium plate that provides a rigid backing. The patch is self-adhesive and won't rust. Fibreglass mesh eliminates the need to pre-plaster.

Marshalltown wooden handle with threaded end adaptor for use with M26 and M26A Swivel Pole Sanders. Size: 1.2m (48in).

M27 Drywall T-Square with silver anodised finish and black epoxy painted imperial graduations for long wear and legibility. The length allows easy use on a standard 48in board. Features imperial graduations. Size: 48 x 22in.

The Marshalltown 26BH-X Swivel Pole Sander Head is made from lightweight, reinforced die-cast aluminium and bonded to a foam rubber pad for extra durability. Fitted with quick-change locking clamps for quicker sandpaper replacement. Ideal for sanding drywall joints. Specification: Size: 240 x 83mm (9.3/8 x 3.1/4in)

M22 Drywall Utility Saw has a heavy gauge blade securely attached to a contoured hardwood handle with ferrule. Cuts wallboard, masonite, plywood and wood. Size: 150mm (6in).

This Marshalltown 20D is a lightweight Hand Sander which can be used to sand drywall joints or other general sanding projects. It is designed to hold die-cut, half sheets, standard paper or sand screen.It is fitted with a one - piece handle clamp which holds the paper firmly, and makes paper changing easy. This sander has a flexible aluminium backing plate which is bonded to a foam pad. The handle is DuraSoft which provides comfort, and reduces fatigue.Length: 239mm (9 3/8 in).Width: 82mm (3 ¼ in).

The Lessman Plasterer's Brush has a beechwood body with hardened steel pins. Used for roughening and structuring of plaster, prior to a final surface coat. This process ensures good adhesion of the final coat. Size: 190 x 95mm (7.1/2 x 3.3/4in).

The IRW10507268 Mortar Rake Starter Kit comes with the following:1 x Sole plate.2 x 3-cutters (10mm).1 x Adaptor.3 x Aluminium reduction rings (41mm, 42.5mm and 43mm).

The IRW10507267 Mortar Rake Starter Kit comes with the following:1 x Sole plate. 2 x 3-cutters (8mm). 1 x Adaptor.3 x Aluminium reduction rings (41mm, 42.5mm and 43mm).

The Irwin IRW10507234 Mortar Raker Adaptor is to be used together with cutters, reducing the risk of breakages, and to ensure a longer lifetime for the cutter.

The Irwin IRW10507233 Mortar Rakes (2 pieces) 4 cutter have the following dimensions:Size 10.0 x 20/40mm 4 cutter

The Irwin IRW10507232 Mortar Rakes (2 pieces) 4 cutter have the following dimensions:Size: 8.0 x 20/40mm 4 cutter

The Irwin IRW10507231 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size: 12.0 x 20/40mm 3 cutter

The Irwin IRW10507230 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size 10.0 x 20/40mm

The Irwin IRW10507229 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size: 8.0 x 20/40mm

The Irwin spare Spare sole plate that ensures consistent clearance depth. The sole plate is adjustable for variable clearance depth. Less intrusive to surrounding brickwork; working with demolition chisels or grinding discs can easily cause damage.

The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.

The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.

1 x Hultafors 207 Steel Pinch Bar 600mm (24in)

1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)

1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)

The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.

1 x Hultafors 109/25 Steel Wrecking Bar 625mm (25in)

1 x Hultafors 109/20 Steel Wrecking Bar 500mm (20in)

1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)

The Hultafors 108 Mini Wrecking Bar can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces. Length: 190mm (7.1/2in).Weight: 77g.

The Hulfafors 108 Wrecking Bar is a small, versatile steel wrecking bar that can be used for pulling out nails and for breaking, scraping and lifting. It has three different functions for pulling out nails and its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. Length: 380mm (15in).Weight: 650g.

This Extra Large Gorilla Tub has the following specifications: Capacity: 75 litre.Dimensions: Height: 37cm. Diameter: 57cm.Colour: Red. Common uses:Pet bed, flower / tree pot, toy storage, general household storage, laundry basket etc.

This Extra Large Gorilla Tub tub has the following specifications: Capacity: 75 litre.Dimensions: Height: 37cm. Diameter: 57cm.Colour: Purple. Common uses:Pet bed, flower / tree pot, toy storage, general household storage, laundry basket etc.

This Extra Large Gorilla Tub has the following specifications: Capacity: 75 litre.Dimensions: Height: 37cm. Diameter: 57cm.Colour: Green. Common uses:Pet bed, flower / tree pot, toy storage, general household storage, laundry basket etc.

This Extra Large Gorilla Tub has the following specifications: Capacity: 75 litre.Dimensions: Height: 37cm. Diameter: 57cm.Colour: Blue. Common uses:Pet bed, flower / tree pot, toy storage, general household storage, laundry basket etc.

The GORTUB75BLK Gorilla Tub Large Size 75 litre (16 gal) has the following specification: Height: 37cm.Diameter: 57cm.Colour: Black.

The GORTUB75 Gorilla Tub Large Size 75 litre (16 gal) has the following specification: Height: 37cm.Diameter: 57cm.Colour: Yellow.

This Large Gorilla Tub has the following specifications: Capacity: 38 litre.Dimensions: Height: 33cm. Diameter: 45cm.Colour: Red. Common uses:Horse feed, plant pot, toy storage, general household storage, laundry basket etc.

This Large Gorilla Tub has the following specifications: Capacity: 38 litre.Dimensions: Height: 33cm. Diameter: 45cm.Colour: Purple. Common uses:Horse feed, plant pot, toy storage, general household storage, laundry basket etc.

This large Gorilla Tub has the following specifications: Capacity: 38 litre.Dimensions: Height: 33cm. Diameter: 45cm.Colour: Pink. Common uses:Horse feed, plant pot, toy storage, general household storage, laundry basket etc.

This Large Gorilla Tub has the following specifications: Capacity: 38 litre.Dimensions: Height: 33cm. Diameter: 45cm.Colour: Green. Common uses:Horse feed, plant pot, toy storage, general household storage, laundry basket etc.

The GORTUB42BLK Gorilla Tub Large Size 38 litre (9 gal) has the following specification: Height: 32cm.Diameter: 45cm.Colour: Black.

The GORTUB35 Gorilla Tub Shallow Size 35 litre (7 1/2 gal) has the following specification: Height: 15cm.Diameter: 56cm.Colour: Yellow.

The GORTUB26BLK Gorilla Tub Medium Size 26 litre (5 1/2 gal) has the following specification: Height: 31cm.Diameter: 40cm.Colour: Black.

The GORTUB26 Gorilla Tub Medium Size 26 litre (5 1/2 gal) has the following specification: Height: 31cm.Diameter: 40cm.Colour: Yellow.

The GORTUB14BLK Gorilla Tub Small Size 14 litre (3 gal) has the following dimensions: Height: 23cm.Diameter: 32cm.Colour: Black.

The GORTUB14 Gorilla Tub Small Size 14 litre (3 gal) has the following specification: Height: 23cm.Diameter: 32cm.Colour: Yellow.

The Gorilla Tub Bucket is strong yet flexible bucket in an easy to find Hi-Viz yellow colour. It can easily be lifted by the thick steel handle with a comfort plastic grip. With reinforced ribbing for extra strength and it is frost and UV ray resistant. Its thicker walls make it great for carrying rubble or sand, and perfect for mixing and pouring with. Dried mix can be knocked out, so it can be used time and time again. Ideal for building site and construction for moving materials in tight spots. Specification Capacity: 22 litre

This Footprint Cold Chisel is supplied with a comfortable hand grip for extra safety. Ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint 591 Cold Chisel with Hand Guard 250 x 25mm

1 x Footprint 590 Cold Chisel 457 x 25mm

1 x Footprint 590 Cold Chisel 300 x 25mm

1 x Footprint 590 Cold Chisel 250 x 25mm

The Footprint Brick Jointer can be used to smooth and shape a mortar joint into a concave shape to keep moisture from penetrating the joint. It is made from carbon steel and is furnace hardened for a longer working life. Its polished finish prevents premature rusting. Size: 12mm (1/2in) x 16mm (5/8in).

1 x Footprint 578 Scutch Comb Holder 1.1/2in

Footprint 578 Scutch Comb Holder 1in

This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, anti-mushroom head. Not suitable for use on concrete or stone. Size: 230 x 15 x 57mm (9 x 5/8 x 2.1/4in).

The Footprint 1861 Grooved Plugging Chisel is supplied with a British made high visibility, high quality protective plastic moulded grip.

1 x Footprint 1860 Grooved Plugging Chisel

Size: 100mm (4in).

Size: 75mm (3in).

The Footprint 1236 Brick Bolster has additional ribs spreading down the sides and the centre of the blade for added strength and a longer life. Width: 114mm (4.1/2in).

1 x Footprint 11220 Brick Bolster 100mm (4in)

1 x Footprint Brick Bolster 75mm (3in)

This Facom 5 piece Punch Set comprises the following sizes: 3mm, 4mm, 5mm, 6mm, 8mm. These precision punches are differentially hardened and have tri-material, shock-absorbing handles. They have long shanks that are hardened to 58HRc and the heads are hardened to 43HRc.

Faithfull packing wedges are designed to assist in the levelling of stud work, battens, door and window frames and many other applications were levelling wedges are required.These plastic shims are supplied in an assorted pack in six different thicknesses ranging from 1-6mm in 1 mm increments.Each size is colour coded for easy identification and shaped to hang from a frame fixing. The tip is tapered to allow for easy installation. Unlike timber spacers these shims are resistant to weather changes and are waterproof. Available in either a handy 100 pack.WEDGE100 is a pack of 100 assorted wedges containing: 20 x Blue 1mm20 x Yellow 2mm20 x Green 3mm20 x Red 4mm10 x Purple 5mm10 x Black 6mm

The Faithfull replacement hardwood handle to suit West Country Shovel. Specification Size: 1300 x 35mm (52 x 1.3/8in)

Size: 900 x 19mm (36 x 3/4 in).

Size: 750 x 19mm (30 x 3/4 in).

Size: 600 x 19mm (24 x 3/4 in).

Size: 450 x 16mm (18 x 5/8 in).

Size: 300 x 13mm (12 x 1/2 in).

1 x Faithfull Utility Bars Twin Pack 175mm (7in) 375mm (15in).

1 x Faithfull Utility Bar 175mm (7in)

1 x Faithfull Utility Bar 375mm (15in)

1 x Faithfull Tuff Bar 900mm (36in)

1 x Faithfull Tuff Bar 600mm (24in)

1 x Faithfull Tuff Bar 450mm (18in)

1 x Faithfull Tuff Bar 350mm (14in)

The Faithfull FAITEXT86 is a heavy-duty Textured Brush with rubber bristles for creating a stippling effect and other patterns associated with textured coating. The brush will wash out easily under cold water immediately after use.Specification: Size: 200 x 150mm (8in x 6in).