Size.1 1/8in.Key Type.B. 5/16 in hexagonal wrench

Size. 1 1/4 in.Key Type.B. 5/16 in hexagonal wrench

Size. 1 1/2 in.Key Type.B. 5/16 in hexagonal wrench

Size. 11/16 in.Key Type. 7/32 in hexagonal wrench

Size.10.0mm.Key Type.. 5mm hexagonal wrench

Size. 1 in.Key Type.B. 5/16 in hexagonal wrench

Size. 4mm (5/32 in).

Size. 8mm (5/16 in).

Size. 5mm (3/16 in).

Size. 3mm (1/8 in).

Size. 6mm (1/4 in).

Size. 12mm (1/2 in).

Size. 4mm (5/32 in)

Size. 8mm (5/16 in)Contents A to Z Plus (and)

Size. 10mm (3/8 in)Contents A to Z Plus (and)

Size. 5mm (3/16 in)Contents A to Z Plus (and)

Size. 3mm (1/8 in)Contents: A to Z plus (and)

Size. 6mm (1/4 in)Contents A to Z Plus (and)

Size. 12mm (1/2 in)Contents A to Z Plus (and)

This Priory No.22 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 25mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.22.Size: 25mm (1in).

This Priory No.18 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 19mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.18.Size: 19mm (3/4in).

This Priory No.16 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 16mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.16.Size: 16mm (5/8in).

This Priory No.14 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 13mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.14. Size: 13mm (1/2in).

This Priory No.12 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 10mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.12.Size: 10mm (3/8in).

This Priory No.10 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 8mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.10.Size: 8mm (5/16in).

This Priory No.8 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 6.5mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.8. Size: 6.5mm (1/4in).

This Priory No.6 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 5mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.6.Size: 5mm (3/16in).

This Priory No.4 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This belt punch is intended for cutting soft materials such as leather. Specifications: Size: 3mm (1/8in).

Size 51mm (2 in)

Size 44mm (1 3/4 in)

Size 35mm (1 3/8 in)

Size 32mm (1 1/4 in)

Size 29mm (1 1/8 in)

Size 25mm (1 in)

Size 24mm (15/16 in)

Size 22mm (7/8 in)

Size 21mm (13/16 in)

Size 19mm (3/4 in)

Size 16mm (5/8 in)

Size 14mm (9/16 in)

Size 13mm (1/2 in)

Size 11mm (7/16 in)

Size 10mm (3/8 in)

Size 8mm (5/16 in)

Size 6mm (1/4 in)

Set of 4 in wallet. 1 of each 1/16in, 3/32in, 1/8in, 3/16in. Length 4in

Size. 5/32 in.Length 4 in

Size. 3/32 in.Length 4 in

Size. 3/16 in.Length 4 in

Size. 1/8 in.Length 4 in

Size. 1/32 in.Length 4 in

Size. 1/16 in.Length 4 in

Size 4mm (5/32 in).Length 100mm (4 in)

Size 2.5mm (3/32 in).Length 100mm (4 in)

Size 5mm (3/16 in).Length 100mm (4 in)

Size 3mm (1/8 in).Length 100mm (4 in)

Size 6.0mm (1/4 in)Length 100mm (4 in)

Size 1.5mm (1/16 in).Length 100mm (4 in)

The Priory 271 Automatic Centre Punch aids accuracy through the single handed operation which alleviates the need for a hammer. Depth of impression can be adjusted via the screw cap. Precision manufactured. Specification Length: 125mm (5in)

A set of 6 hexagonal bodied punches with extra long pins. Walleted as a set containing one of each of the following sizes. 1/8in, 5/32in, 3/16in, 7/32in, 1/4in and 5/16in.

Size. 5.5mm (7/32 in).

Size. 4mm (5/32 in).

Size. 4.8mm (3/16 in).

Size. 3.2mm (1/8 in).

Size. 6.4mm (1/4 in).

Walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.

Walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.

Size 5.5mm (7/32 in).

Size 4.0mm (5/32 in)

Size 8mm (5/16 in).

Size 9.5mm (3/8 in).

Size 3/32in.

Size 4.8mm (3/16 in).

Size 3.2mm (1/8 in).

Size 6.4mm (1/4 in).

Size 1.6mm (1/16 in).

This Priory 129 Combination Scriber is double ended with a point and a knife edge. The knife edge is ideal for marking wood, plastic and laminates, and can also be used for scraping surfaces clean. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specification: Size: 165mm (6.1/2in).

This Priory 127 Engineers Scriber is a one piece constructed scriber for marking all metal. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specifications: Size: 125mm (5 in).

Specifications:Tip: 9.5mm (3/8in).Length: 150mm (6in).

This Priory Scriber has two points, one bent at 90 degrees giving improved access in confined spaces. It has a knurled body to give a positive finger grip and sharp ground points heat treated to give a long life. Specification: Length: 177mm (7in).

Size 2.5 x 115mm (3/32 x 4 1/2 in)

Size 5 x 125mm (3/16 x 5 in)

Size 3 X 115mm (1/8 x 4 1/2 in)

Size 4 x 125mm (5/32 x 5 in).

Size 2.5 x 115mm (3/32 x 4 3/4 in).

Size 5 x 125mm (3/16 x 5 in).

Size 3 x 115mm (1/8 x 4 3/4 in).

Size 6.5 x 140mm (1/4 x 5 1/2 in)

An extremely handy pocket sized reference booklet of data charts and tables for the drawing office, toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd, who are members of the British Standards Institution. The 28 laminated pages contain data on standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial threads, BS4500 tolerances, hardness comparisons, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending and Morse tapers. Also, long tables for sine, cosine, tangents and cotangents.

This Stuarts Micrometer Engineers Blue is used in marking out in the workshop/garage for locating high spots on steel surfaces when checking valve seats, and has many other uses. It gives a clear perfect mark on any metal in any light, and being a lubricant cannot damage bearings or other working parts. Size: 38g.

The Moore Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).

The Moore Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).

The Moore Wright CSRME24 is a 600mm/24in rule is perfect for use with the combination sets and is graduated on both sides. Measurements: Metric Graduations: in 0.5mm, numbered every 10mm. Imperial Graduations: 32nds and 64ths numbered every 1/8in. PLEASE NOTE This is ONLY the Rule.

The Moore Wright CSRM600 is a 600mm rule is perfect for use with the combination sets and is graduated on both sides. Measurements: mm and 0.5mm on both sides; numbered every 10mm. PLEASE NOTE This is ONLY the Rule.

The Moore Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: Metric graduations: in 0.5mm, numbered every 10mm. Imperial graduations: 32nds and 64ths numbered every 1/8in.

The Moore Wright CSM300 Precision Combination Set is a full set including 300mm rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: mm and 0.5mm on both sides; numbered every 10mm.

The Moore Wright Internal Micrometer 903M Internal Micrometer has the following specification: Range: 50-310mm.Head Range: 10mm.

The Moore Wright Internal Micrometer 903 Internal Micrometer has the following specification: Range: 2-12in.Head Range: 0.50in.

The Moore Wright Internal Micrometer 902M Internal Micrometer has the following specification: Range: 50-210mm.Head Range: 10mm.

The Moore Wright Internal Micrometer 901M Internal Micrometer has the following specification: Range: 25-55mm.Head Range: 5mm.