Metric Roofing Square 400 x 600mm This Stanley Steel Metric Roofing Square, 400 x 600mm, is designed for roofing calculations and layout of stairs, its face is graduated every 2mm, and on the reverse of the blade every 1/8 inch for detailed work.It has a reversed reading scale and crisply embossed graduations for easy reading. This square has buffed finish and has a protective lacquer coating for rust resistance. Specifications: Width: 400mm (15.3/4in).Length: 600mm (23.2/3in).

Aluminium folding square with 90 and 45 for versatility of job applications.Ideal for large scale setting out of building profiles, foundations , floor tiling, paving etc. Durable yet lightweight aluminium construction.Folds into a single length for easy storage. Size: 48 x 48 x 68in (122 x 122 x 172cm)

The Stanley FatMax Chalk Line has a water-resistant, high-impact ABS case with rubber grips that make it comfortable to hold. It rewinds 3x faster due to the 3:1 gear ratio and has a stainless steel end hook for added durability and rust prevention. The large 45g chalk capacity helps to reduce refilling times. There is also a chalk view window that allows you to see exactly how much chalk you have left. Supplied with: 1 x Blue Chalk Refill 113g and 1 x Fine Tip Black Marker.

Stanley FatMax 30 metre chalk line and chalk set. The chalk line is enclosed in a durable die-cast aluminium housing, with a patented chalk view window to see exactly how much chalk is left. A release button allows line extension without handle rotation and the line can be quickly rewound due to the 5:1 gear ratio. Supplied with a 113g. refill of black chalk. Chalk line length: 30m (100 ft).

The Stanley FatMax 30 metre Chalk Line is enclosed in a durable die-cast aluminium housing with a patented chalk view window to see exactly how much chalk is left. It contains 100ft of 50lb polyester/nylon string and will hold over 1.5oz of chalk.A release button allows a line extension without handle rotation, the line can be quickly rewound due to the 5:1 gear ratio. The specially designed hook grabs on side, top or bottom for versatility. Specifications: Length: 30m (100 ft).

The Stanley Power Winder Chalk Line kit is supplied with 113g of blue chalk and a line level. The case will hold 45g/1.5 oz of chalk to reduce filling times and it contains 100ft of 40lb string. The metal crank folds inside the case for storage, importantly the stainless-steel end hook will not rust.The quick gear release - crank will not spin when pulling out the line, and it has a sliding door for quick and easy refill. This chalk line combines weight and style to provide plum bob utility. Specification: Cord Length: 30m.

Stanley Power Winder Chalk Line with a stainless steel hook for added durability and rust prevention. It has an ergonomic design, holds 30m of string and has a 45g chalk capacity. The weight and style combination provides an excellent plumb bob facility. With a high impact ABS case for durability, a 3.5:1 gear ratio which rewinds faster and a metal crank which folds into the case for storage.

This Stanley Chalk Line has an ergonomic design, with a high impact ABS case for durability. It has an on-board hook storage, a crank which folds into a case for storage and a sliding door which allows for quick and easy refill (30g. Chalk Capacity). It has a stainless steel end hook for added durability and rust prevention, and can hold 30m of string.Supplied with 113g blue chalk and line level.

This Stanley 047440 Chalk Line has a 30g/1oz chalk capacity and holds 100ft of string. It can be used vertically as a plumb bob with the crank folding into the case for storage. It has an ergonomic design and high impact ABS case for durability. There is a sliding door for quick, easy refill and a stainless-steel end hook which does not rust.Specification: Cord Length: 30m.

These Stanley standard, black, Fine Tip Permanent Markers are ideal for electricians, plumber, and general contractors. The ink is quick drying and is ideal for avoiding smudged lines. They can be used for marking copper roofing material, gas pipe, black pipe, wood, and metal, and marking tools and equipment. These markers can be used to colour nuts and bolts which need to be black. Specifications: Pack Quantity: 2.Colour: Black.

A pack of 3 permanent markers. Quick drying and oil resistant ink marks on almost any surface. The chisel tips allow for 2 distinct lines (broad and fine). Black, blue and red markers included.

These Stanley Fatmax Chisel Tip permanent Black Markers are ideal to mark out in all-weather and environmental conditions. They have a strong durable chisel tip which reduces wear and tear even when they are used on abrasive surfaces. They are water and oil resistant.The Bi-material hand grip provides ease of use in all weather conditions as well as when wearing gloves. They can be used to mark tools, equipment and for marking - copper roofing material, gas pipe, black pipe, wood, metal, concrete, coating roof, pipe, and welding. Specifications: Colour: Black.Pack Quantity: 2.

These Stanley Fatmax Fine Tip permanent Black Markers are ideal to mark out in all-weather, environmental conditions. They have a strong durable tip which reduces wear and tear even when used on abrasive surfaces. They are both water and oil resistant.The Bi-material hand grip provides ease of use in all weather conditions as well as when wearing gloves. They can be used to mark concrete foundations as well as copper roofing material, gas pipe, black pipe, wood, metal, marking tools and equipment. They can be used to colour nuts and bolts needing to be black. Specification: Colour: Black.Pack Quantity: 2.

The Stanley Compact Chalk Line is less than half the size, by volume, of standard chalk reels. It has a 9m precision line that snaps clean with accurate lines and a high impact ABS housing that is durable and light. It also has soft grip over-moulding that provides more user comfort and a secure grip. The 3:1 rewind gear ratio retracts the line 3x faster than a standard 1:1 reel. The chalk lines slide-open door allows for quick chalk refills and has a compact reel chalk capacity that gives up to 50 lines per refill. Also features a belt clip for easy transport and storage.

This Stanley Chalkomatic has a 30m line length and a 30kg chalk capacity, it can be used vertically as a plumb bob. The powder is put in by screwing the watertight upper milled stopper, and it is equipped with felt to regulate the flow of the power.The chalkomatic is yellow in colour for better visibility and has a die cast aluminium case for durability, the end hook is stainless steel for added durability and rust protection. The line is blocked by folding the handle and has a universal hanging clip. Specification: Length: 30m (100ft).

Sliding bevel with durable stainless steel blade.Built-in blade lock for transferring angles.A tough plastic handle provides a handy, comfortable grip.

Hardened and tempered blade with blued finish. Sliding blade can be locked into position by means of a plated lever. Size. 10.1/2in.

This combination square has a cast iron stock and is therefore more robust for heavy-duty use. It is fitted with a level and scriber, and has graduations on both sides of blade in mm, 8th's and 16th's inches. It is machined on all faces and has class 1 accuracy on the steel rule. It can also be used as a try and mitre. Size: 300mm (12in)

The Sharpie Twin Tip Permanent Marker can be used on most surfaces. With a 1mm fine tip at one end and a 0.5mm fine nib at the other. Ideal for everyday use; at home, on the jobsite etc. The high-quality ink dries quickly and resists both fading and water. The cap quickly identifies the colour inside, there is also a handy clip that allows the marker to be attached to a pocket or folder.

The Sharpie Retractable Fine Permanent Marker has a 1mm tip and no cap to remove or lose, this enables easy one-handed operation. A unique safety seal valve prevents drying out. It can be used on most surfaces. Ideal for everyday use; at home, on the jobsite etc. The high-quality ink dries quickly and resists both fading and water.

1 x Pack of 2 Sharpie Fine Tip Permanent Markers Black

1 x Pack of 4 Sharpie Fine Tip Permanent Markers. Colours: Black, Blue, Red and Green.

1 x Sharpie Fine Permanent Marker Black

Size: 225mm (9in).

Length: 150mm (6in).

Size: 225mm (9in).

Size: 150mm (6in).

This R.S.T Marking Gauge is made from beechwood with a plastic thumb screw to allow easy adjustment. Made in the UK.

This Roughneck Chalk Line features a comfortable rubber grip with fold away winding handle. Its 3 to 1 gear ratio allows for quick re-wind. Complete with an 224g (8oz) bottle of blue chalk its ideal for use on plasterboard, brick, concrete and wood.

Manufactured from solid forged carbon steel, hardened and tempered, nickel plated, polished to a bright finish. Used by builders for aligning courses of brickwork by attaching a builders line between them. One piece solid forged - for extra strengthLarge button head - easier to strike and holds the line in placeStrong sharp point - hardened and tempered to prevent bending and last longerTaper ground point and edges - drives into the wall easierBulbous centre section - increases strength and helps hold the pin in placeLong stem - easier to wind the line aroundChrome plated for a fine finish, improved wear resistance, rust prevention and better quality appearance.

CDU of 30 MarXman Standard Professional Marking Tools. The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.

The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.1 x MarXman Standard Professional Marking Tool

CDU of 30 MarXman Standard Deep Hole Professional Marking Tools. The MarXman Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more. This CDU contains the following mix: 20 x MarXman Standard Professional Marking Tools. For jobs with fixing holes up to depths of 45mm. 10 x MarXman Deep Hole Professional Marking Tools. Recommended for jobs with fixing holes exceeding depths of 45mm, e.g. fence posts. Its special nozzle is designed to shoot the green pigment further and more accurately. Not advised for marking distances under 45mm.

CDU of 30 MarXman Deep Hole Professional Marking Tools. The MarXman Deep Hole Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. Each pen contains 250 bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. Recommended for jobs with fixing holes exceeding depths of 45mm, e.g. fence posts. Its special nozzle is designed to shoot the green pigment further and more accurately. Not advised for marking distances under 45mm. The perfect drilling companion for electrical, plumbing, building jobs and much more.

Monument Steel Plumb Bob. Weight: 450g (1lb).

Monument Steel Plumb Bob. Weight: 230g (8oz).

The Monument MON379 379W Steel Plumb Bob weighs 113g (4oz).

Monument 254T Brass Plumb Bob. Weight: 450g (16oz).Size: 7.

Monument 251K Brass Plumb Bob.Weight: 230g (8oz). Size: 4.

Monument 249D Brass Plumb Bob.Weight: 127g (4.1/2oz). Size: 2.

Monument Brass Plumb Bob.Weight: 71g (2.1/2oz). Size: 0.

Monument 246U Brass Plumb Bob. Weight: 43g (1.1/2oz). Size: 00.

Colour. Yellow.

Colour. White.

Colour. Red.

Colour. Green.

Colour:- Blue

1 x Markal Paint-Riter Valve Action Paint Marker Yellow

1 x Markal Paint-Riter Valve Action Paint Marker White

The Markal DURA-INK 20 Fine Bullet Tip is a retractable permanent ink marker, which uses a one-handed operation, push-button for easy activation on the job site. Wear-resistant ink formula, and formulated to dry quickly and leave bold, highly-visible marks. The wear-resistant ink is safe for use on almost any surface and is water-resistant. Supplied in a display pack, 24 pieces. Mark Size: 1.5mm (1/16in).

These Markal TRADES-MARKER DRY Refills have the following specification: Colour: Assorted - 2 x Graphite, 2 x Yellow and 2 x RedPack Quantity: 6

These Markal TRADES-MARKER DRY Refills have the following specification: Colour: GraphitePack Quantity: 6

The Markal TRADES-MARKER DRY Holder is a graphite clutch pencil with an extended fine tip. The fine tip extends to 45mm, ideal for hard-to-reach places (allows for deep markings, in fixing holes). Its cap, body and clip are made from metal for increased durability and strength, making it ideal for professional use. Practical and handy, the sharpener is incorporated into the push button, allowing for extremely precise markings. With automatic lead ejection, a single press on the button pushes the lead out by 2mm. It also features a sturdy clip for hooking onto shirts or trousers. Refills are easy to replace: unscrew the push button, insert the new refill, screw the button back in (coloured refill must already be sharpened before insertion). It can use graphite or coloured refills, meaning it can write or mark on all types of surfaces and materials (dusty, rough, smooth, greasy, wet, dark, etc.) Uses refill 2.8mm, compatible with other refill types on the market.

Card of 2

Markal Builder's markers are more economical and longer lasting than ordinary wax crayons. They are lead-free and non-toxic. Weather and fade resistant. Marking Temperature Range: -29C to 66C (-20F to 150F).Supplied in a display pack, 48 pieces

This Tub of 24 Markal Paint-Riter Valve Action Paint Markers contains a mixture of colours; yellow, white and black.

Tub of 20

Tub of 48

Size. 230mm (9in).

The IRWIN Marples M2200 Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy. Bevelled squares are perfect for marking out lines, testing squares and angle lengths. All Marples measuring tools are made from an aluminium block and with a hardened steel blade which is secured by three steel rivets with brass washers, preventing movement. The scales are etched on the surface which ensures long durability. The tools are manufactured according to a very fine tolerances, so all measuring tools are very precise. Also features an edge holder for accurate positioning. Size 150mm (6 in).

This Marshalltown Bonded Nylon Mason's Line has the following specification: Length: 152m (500ft)Colour: Flecked White

The Marshalltown M634 Mason's Line Winder can be used to create straight lines and a level surface when laying out posts, patios, footings and more. It has been heat set for increased stability and remains unaffected when in contact with mortar, oil, mildew or water. Its orange colour makes it extremely visible on-site and the plastic winder keeps it intact for safe and neat storage. Complete with 76.2m (250ft) of orange mason's line.

1 x Marshalltown M632 Mason's Line 76.2m (250ft) - Fluorescent Yellow

1 x Marshalltown M631 Mason's Line 76.2m (250ft) - Fluorescent Pink.

1 x Marshalltown M621 Mason's Line 76.2m (250ft) - Yellow

1 x Marshalltown M620 Mason's Line 76.2m (250ft) - White

Plastic brick line blocks used instead of line pins when laying bricks. Pack of 2.

Pair of hardwood brick line blocks.Used instead of line pins.Pack of 2.

This IRWIN STRAIT-LINE Classic Chalk Reel features a fill door, more than 70% larger than the previous design, for quick and easy chalk fill. The 30m (100 ft) abrasion resistant poly line provides up to 6 strikes per pull. The robust steel handle and large centre hub deliver increased durability, strength, and torque, while the durable aluminium housing provides impact resistance. Length: 30m (100 ft).Gear ratio: 1:1.Line type: 50 or 100ft Polyester Line.Delivers: 5 - 6 strikes per pull.

Irwin sliding bevel is ideal for setting and transferring angles. It has a fine steel blade and aluminium block construction. Size: 300mm (12in).

Irwin Aluminium Try Mitre Square 300mm (12 in). Size: 300mm (12 in).

Aluminium Try Mitre Square 250mm (10 in). Size: 250mm.

This Hultafors square is semi-professional with fibreglass-reinforced ABS plastic stock and millimetre graduations on the upper and lower edges of the blade. The blade is made from stainless steel, measuring 1.0 x 45 mm, and has a fibreglass-framed ABS plastic stock, with an 18 mm wide working surface.The graduations are deep etched, and highly resistant to wear. Size: 200mm.

1 x Hultafors V 20 Professional Try Square 200mm (8in)

The Hultafors HULSMV20 Bevel Square with stainless steel blade and aluminium stock has milled working surfaces, for the copying and transfer of angles to work pieces. The square has a screw for a locking blade at the end of the stock for improved accessibility.Size: 200mm.

The Hultrafors Quattro Adjustable Try Square has a millimetre scale which can be set at three positions (45, 90 and 135) and has a tolerance 0.06. It can also be folded making it easy to store and carry. The stock is made of anodised aluminium, the blade is 25cm long x 45mm wide and made of stainless steel, with the scale being deep-etched, and extremely hard-wearing. Size: 250mm.

Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5, 45, 67.5 and 90). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position. Blade Length: 1200mm (47.1/4in)Weight: 1150g.

The Hultafors Dry-Marker has a grip-friendly and ergonomic design. Supplied in a holster with a built-in sharpener for clear markings. It's easy to remove from the holster, so you don't have to let go of what you're working with. The shape of the holster ensures that the pen stays in place even when you move. The pen can be used whilst in the holster or removed completely depending on your preference. There is a hole in the bottom of the holster, this allows dirt and moisture to fall away from the pen, providing a longer life. The lead is easy to change and refills are available.

This Hultafors Mitre Square automatically produces the correct angle when cutting mitres without having to perform any calculations. When the tool is turned to the desired angle, the indicator flag divides the angle by two. The guide is made from fibreglass-reinforced nylon, with an indicator flag of electrogalvanized metal, and can be used for both internal, and external angles.SIze: 150mm.

Suitable for measuring angles or transferring angles from a point of measurement to a work-piece. Made of anodised aluminium for improved durability against corrosion. Alpha x read on the left side of the scale, Beta x on the right and can also be used to read angles between 20 and 160.

The Hultafors CLP30 Chalk Line has a 30m line, metal crank and quick gear function 3:1. The housing is made from ABS plastic, has a big opening for refilling and a cap with bayonet joint and contains up to 100g of chalk. The line is braided cotton/polyester with high absorbing chalk capacity and considerable increased numbers of distinct lines - up to 10 lines. The crank is fitted with an ergonomic release button and knob. It can be locked in the open and closed position. The cap is secured by the hook, no line is left hanging loose. There is also a secure strap function.

The Hultafors Chalk Line comes with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength, and the braid ensures the cord never tangles. The cord is 1 mm in diameter, and has a rupture limit of 16 Kg. 30m / 100ft.Capacity: 80g of chalk.

1 x Hultafors Deep-Hole Marker Red

1 x Hultafors Ink Deep-Hole Marker Black

1 x Pack of 10 Hultafors Dry-Marker Refills containing: 4 x Graphite Leads3 x Red Chalk Leads3 x Yellow Chalk Leads

1 x Pack of 10 Hultafors Dry-Marker Refills containing: 10 x Graphite Leads

The Hultafors 52ME Combination Square can be used as an outside and inside try square, mitre square, depth and marking gauge. It has a stainless steel blade with ground edges, and ends marked in millimetres and inches. The lightweight zinc stock is matt black and is fitted with a scriber. Specification: Size: 300mm (12in)

1 x Hultafors Rafter Square Imperial 7in

1 x Hultafors Rafter Square Metric 18cm

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5, 45, 67.5, 90). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification: Blade Length: 900mm (35.1/2in).

This Footprint set is ideal for people new to bricklaying or for the seasoned professional who requires the best quality products. The set contains: 2 x Line Pins1 x Brick Jointer1 x 18m Nylon White Line

Steel line pins, drop-forged 160mm (6 1/4 in) long hardened and chrome plated. Display box of 50.

2 x Footprint 620 Line Pins. Supplied as a card of 2.

1 x Footprint 620B Line Pin Supplied as a single, loose.

This highly versatile combination square has all the uses of a standard combination square. It reads any angle instantly, checks through horizontal and vertical lines, and measures 0-90 in any quadrant.Not affected by magnetic fields, heat or cold.Lightweight stock is finished in matt black.Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

A versatile measuring instrument with matt black die cast stock, brass locking screw and stainless steel blade with markings clearly etched on both sides, fitted with separate scriber.Also fitted with a steel blade, centre head and protractor set.

A standard try and mitre square with lightweight die-cast stock fitted with spirit level to give both horizontal or plumb readings.Black japanned finish.The 6in (150mm) stainless steel blade has ground edges and is graduated in inches (16ths) and mm.

A versatile measuring instrument with matt black die-cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with a separate scriber. This tool can be used as a try and mitre square, depth gauge, steel rule and straight edge.Spirit level gives horizontal plumb on 45 readings. Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

A versatile measuring instrument with matt black die-cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with a separate scriber. This tool can be used as a try and mitre square, depth gauge, steel rule and straight edge.Spirit level gives horizontal plumb on 45 readings. Centre head enables the centre of circular objects to be located.Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

This Fisher multi-purpose Combination Square has a heavy-duty cast iron stock with ground faces. It can be used as an outside or inside try square, a mitre square or depth and marking gauge.The vial and stock give level 45 and plumb reading. A separate scriber is also fitted. Specification: Size: 12in (300mm).