Drill Bits & Holesaws

DT70751 Extreme Flat Bit Set, 9 Piece

DEWALT Extreme Flat Wood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hardwood and softwood, chipboard and other man-made materials. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 9 Piece Set contains the following sizes: 12, 14, 16, 18, 20, 22, 25, 28 and 32mm.

£ 37.98

DT70750 Flat Drill Bit Set, 8 Piece

DEWALT Flat Drill Bits are made from high-quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hardwood and softwood, chipboard and other man-made materials. Supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 8 Piece Set contains the following sizes: 12, 16, 18, 20, 22, 25, 28 and 32mm.

£ 46.72

9629 Series Flat Bit Set, 8 Piece

The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. This 8 Piece Bahco 9629 Series Flat Bit Set is supplied in a handy, plastic carry case. Contains the following sizes: 12, 16, 18, 20, 22, 25, 28, 32mm.

£ 25.58

9526 Combination Wood Auger Bit Set, 6 Piece 10-25mm

Bahco 9526 Combination Auger Bit Set, contains 6 of the most popular sizes. These are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood. Supplied in a wallet case. Sizes: 10, 13, 16, 19, 22 and 25mm.

£ 73.85

HSS-CO Drill Bit Set 19 Piece

The Metabo HSS-CO Drill Bit Set is suitable for drilling in steel, VA-steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm tensile strength. The bits are made from a cobalt alloy with a ground, cylindrical, type N 135 crosswise grinding tip and bronze coloured surface finish. They are supplied in a metal tin and it contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 10mm.

£ 34.04

HSS-Tin Drill Bit Set, 19 Piece

The Metabo HSS-Tin Drill Bit Set is suitable for drilling steel and cast steel, alloyed and unalloyed, grey cast iron, non-ferrous metals and plastic up to 900 N/mm tensile strength. The bits are coated with a titanium nitrate alloy with a ground, cylindrical, type N, 135 crosswise grinding tip and gold coloured surface finish. They are NOT suitable for aluminium.Supplied in a metal tin.Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 10mm.

£ 12.42

HSS-G Drill Bit Set 25 Piece

The Metabo HSS-G Drill Bit Set suitable for drilling steel and cast steel, alloyed and unalloyed, grey cast iron, malleable cast iron, ductile cast iron, sintered iron, nickel silver, graphite, non-ferrous metals, and plastic. Up to 900 N/mm tensile strength. The bits have been ground with a cylindrical, DIN 338, type N, 135 crosswise grinding tip. They are supplied in a metal tin and it contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 13mm.

£ 20.88

HSS-G Twist Drill Bit Set 19 Piece

The Metabo HSS-G Twist Drill Bit Set is suitable for drilling steel and cast steel, alloyed and unalloyed, grey cast iron, malleable cast iron, ductile cast iron, sintered iron, nickel silver, graphite, non-ferrous metals and plastic. Up to 900 N/mm tensile strength. The bits have been ground with a cylindrical, DIN 338, type N, 135 crosswise grinding tip. They are supplied in a metal tin and it contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 10mm.

£ 10.58

HSS-R Drill Bit Set 25 Piece

The Metabo HSS-R Drill Bit Set is suitable for drilling in steel, non-ferrous metals, alloyed, non-alloyed and cast steel up to 900 N/mm tensile strength. The bits are roll-milled with cylindrical, type N 118 cone-shape tips and have a shell polished surface. Supplied in a metal tin and contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 13mm.

£ 16.10

HSS-R Drill Bit Set of 19 1-10mm

The Metabo HSS-R Drill Bits, roll-milled version with a cylindrical, type N, 118 cone-shaped tip and shell polished surface. Suitable for drilling in steel, non-ferrous metals, alloyed and non-alloyed cast steel. Up to 900 N/mm tensile strength. Supplied in a handy metal case and contains the following: Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 10mm.

£ 9.18

SHOCKWAVE HSS-Ground Titanium Metal Drill Bit Set, 10 Piece

Milwaukee SHOCKWAVE™ Metal Drill Bits are impact rated with a titanium coating that dispenses heat. Its 135 tip angle reduces tip walking and allows for a precise start. The chip breaker tip splits up the size of the material from the cutting edge and helps cool down the material. The flute design allows for a faster material ejection and decreases heat build-up for more efficiency. Fitted with a 1/4in hex shank making it suitable for impact and drill drivers. Supplied in a compact, convenient storage case with the following sizes: 3 x 65mm, 3.5 x 69mm, 4 x 71.5mm, 4.5 x 76mm, 5 x 93mm, 6 x 105mm, 7 x 109mm, 8 x 111mm, 9 x 117mm and 10 x 120mm.

£ 68.38

HSS Titanium Metal Drill Bit Set, 15 Piece

IRWIN HSS Pro Titanium Drill Bits designed for drilling metal and harder alloys, as well as being able to produce increased drill speeds of 40%-60% in comparison to the standard bits. With a titanium nitride coating for higher friction resistance and longer bit life. Its 135 split point ensures perfect centring and minimises bit walk, whilst also reducing drilling pressure, giving a more accurate and clean finish. Heavy-duty web construction is designed for optimum strength and durability. This 15 Piece Set contains the following sizes: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm.

£ 51.60

HSS Cobalt Drill Bit Set, 15 Piece

IRWIN HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135 split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high-quality HSS steel containing 5% cobalt (Co). The added 5% cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish. This 15 Piece Set contains the following sizes: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm.

£ 80.33

HSS Pro Drill Bit Set, 15 Piece

The IRWIN HSS Pro Drill Bits are manufactured from high-quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal, and a universal 118 point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards. This 15 Piece Set contains the following sizes: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm.

£ 47.65