Gorilla Superglue Micro Precise keeps holding strong, even when the bond takes a hit. Just hold in place for 10-45 seconds whilst the formula sets, no clamping necessary. It has an anti-clog cap that provides precise application exactly where you need it. Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more.

Gorilla Superglue has a fine bristled brush for controlled coverage with less mess. Precision tip nozzle for quick, easy dispensing. Its high strength and quick set-time make it the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, dries in 10–30 seconds and is Impact-Tough reinforced with rubber for increased impact resistance. It has an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability.

This pack contains 2 x Gorilla Glue Gorilla Superglue 3g

Size - 5g tube

Size - 33g tube

The Everbuild STICK2 All-Purpose Superglue Tube is a high strength universal glue that can fill gaps up to 0.1mm. It can also bond non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. The superglue is quick drying and forms an instant bond in just 1 minute. Size: 3g.

STICK2 All-Purpose Superglue fills gaps up to 0.1mm and is perfect where a fast set is required. Bonds non-porous surfaces such as plastics, metals. PVCu, rubber, ceramics and much more.

Everbuild STICK2 Superglue Gel is a thixotropic ethyl cyanoacrylate based adhesive for bonding most common materials. The high viscosity formula is ideal for non-drip, vertical, porous or small gap filling applications. Everbuild STICK2 Superglue Gel bonds most types of wood, plastics, metals, paper, porcelain, rubber, cardboard and leather. To de-bond use Everbuild Superglue Remover.

The EVERBUILD PVCu Acti-Spray is an aerosol applied activator for use with Everbuild Industrial Superglue GP and HV, a setting superglue in 10 seconds. Guaranteed not to stain PVCu, this Acti-Spray is ideal for use on all PVCu, and plastics. The white-coloured activator will work on all common building surfaces, is suitable for use with all cyanoacrylate superglues and will not cause yellowing of uPVC frames and trim.Specifications: Colour: White.Size: 200ml.

Everbuild Industrial Superglue HV Size: 20g.

Bostik Superglue Non-Drip Gel forms a strong, long lasting bond with most materials including wood, ceramics, hard plastics, rubber, metals and leather in seconds. Its non-drip formula makes it ideal for porous and vertical surfaces. With a precision nozzle for ease of application.

Bostik Superglue Easy Flow liquid forms a strong, long lasting bond with most materials including wood, ceramics, hard plastics, rubber, metals and leather in seconds. Superglue Easy Flow comes in a bottle with a precision nozzle for controlled application.

Bostik Superglue Liquid forms an ultra strong, long lasting bond with most materials including wood, china, hard plastics, rubber, laminates and metals in seconds. Superglue Liquid comes in a convenient tube with a precision nozzle.

1 x Gorilla Superglue Gel 15g

1 x Gorilla Glue Gorilla Superglue 3g

1 x Gorilla Glue Gorilla Superglue 15g

Everbuild Industrial Superglue HV Size: 50g.

Size - 50 g.

20gm bottle.

PlastiKote Trade Repositional Spray Adhesive is suitable for bonding paper, cardboard, wood, textiles and various types of plastic. Provides temporary adhesion.

PlastiKote Trade Permanent Spray Adhesive is suitable for bonding paper, cardboard, wood, textiles and various types of plastic. Provides permanent adhesion.

A general purpose spray adhesive suitable for indoor and outdoor applications. Easy to use and an ideal substitute for double sided tape. Ideal for fixing floorings, upholstery, fabric, foam, polythene, foils, loose lay materials, cardboard and many other materials.Not suitable for use on vinyl or for mounting photographs.Test before use on new applications or unfamiliar materials to confirm suitability before use. Each 500ml can cover an area of 60 sq ft approximately (medium setting). Non-chlorinated and CFC free.

Everbuild Smart Tack is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time-saving application benefits. Supplied in a standard aerosol can for smaller jobs and tricky areas such as edging, mitred joints etc. Offers the benefits of the smart tack system with lower pressure application. Based on new technology resins, providing very fine strands of 'high solids' adhesive that forms a web type pattern on application. Can be used for a multitude of uses in the shopfitting, furniture manufacture, laminating, joinery and exhibition industries. Size: 500ml.

Bostik Fast Tak is a permanent spray adhesive in an aerosol can. Ideal for presentations, crafts and household repairs. Good for bonding a variety of materials including paper, card, foam, leather, rubber, hard plastics, metal, wood, hardboard, stone and even concrete.

Stick 2 CARPET FIX SPRAY is sprayable medium-duty glue which fixes P.U. and a foam backed carpets, carpet tiles, underlay, paper felt and cork to most common substrates. This product has the following advantages:Economical in use.Fast rate of tack development.Time saving- easier and quicker to apply than most trowel/spreader applied adhesives.Foaming formula-gives low soak into substrates.CFC free.Repositionable.

The Everbuild brand is not only hugely popular with tradesmen and DIY'ers. It's quite literally huge - the biggest range in the business. In addition to core manufactured products the Everbuild range includes a wide range of ancillary items from sealant guns to dust sheets, line markers to masking tape. The range of products Everbuild actually manufacture is extensive, from chemical blending for admixtures and water proofers through water based sealant manufacturing to the highly advanced polymer engineering undertaken in manufacturing silicone and hybrid sealants, as well as adhesives and a wide range of powder products. Everbuild Stick 2 All Purpose Spray Contact Adhesive is a sprayable glue which bonds to most common materials including wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork. It is ideal for securing most carpets/floor coverings. Suitable for internal and external use, giving permanent or temporary adhesion. It provides good adhesion with a good rate of tack development, is easy to use with no messy spreading / clearing up and is halogen and CFC free. Size : 500 ml.

5 Litre

Size: 2.5 Litres.

Size: 1 Litre.

Size: 500ml.

Contractors PVA is a multi purpose agent, primer sealer, cement filler and plaster admixture that adheres to most common building and DIY materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture. NOTE - for areas subject to constant damp, use Everbuild SBR Bond which is water resistant.

Bostik Leather Repair Clear Glue is an ultra strong, quick drying, water resistant, clear adhesive. It is perfect for making long lasting, flexible repairs to leather or imitation leather items such as shoes, belts or bags.

Everbuild STICK2 Hard Plastic Adhesive is a strong, clear, quick drying adhesive, suitable for bonding most hard plastics such as rigid PVC, acrylic, polycarbonate and ABS. Ideal for repairs to guttering, sills and bonding PVCu and ABS non-pressure pipework. Temperature resistant to 100C.

Bostik Hard Plastics glue is an ultra strong, quick drying clear adhesive. It is perfect for tough repairs on most hard and clear rigid plastics including PVC-U, ABS and High Polystyrene and other materials.

Bostik Soft Plastics glue is an ultra strong, quick drying, water resistant clear adhesive, perfect for making flexible repairs to things like inflatables and tents. It also contains a PVC repair patch.

Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load-bearing and resistant to weathering, humidity and wide temperature variations. Applications: Outdoor weathering or solvent exposure thermoformed plastic assemblies, PVC, fibreglass, vinyls, ABS, steel aluminium, stainless steel, acrylics, phenolic, polycarbonate, styrenics, Noryl, PET, wood, concrete and ceramic magnet and speaker assembly. Specifications: Viscosity: 55,000cpsColour: Off whiteWeight: 8.44 lbs/galMixed Density: 8.28lbs/galFlash Point: 51FMixed Viscosity: No sagging gelOpen Time: 3 minutes @ 72F, 22CAssembly Time: 6 minutes @ 72F, 22CFunctional Cure: 3/4-1 hourFull Cure: 4 hoursSolvents: NoneCoverage: (based on 25ml) 152 sq.in @ 0.010in

Bondloc B2060 is a 60 second, 2-part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. It reacts within a minute to give a tough resilient bond on a wide variety of surfaces. Specifications: Mix Ratio 1:1Work Life as a Mix: 40 - 70 secondsSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity @ 25C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: BlueViscosity @ 25C: 130 PoiseSpecific Gravity: 1.14

Bondloc B2013 is a steel-filled epoxy putty for general maintenance, repairs, filling, rebuilding and bonding metal surfaces. Specifications: Colour: BlackMixed Viscosity: Putty% Solids by Volume: 100Cured Density: 2.33 gm/ccCure Shrinkage ASTM D2566: 0.0006 in/inSpecific Volume: 11.9 in/lbPot Life: 45 minutesComprehensive Strength ASTM D695: 8,260 PSIAdhesive Tensile Strength EASTMD1002: 2,800 PSICured Hardness Shore D ASTM 2240: 85 DDielectric Strength volts/mil ASTM D149: 30Coverage: 48 sq.in/lb @ 1/4inTemperature Resistance: Wet: 100F, Dry: 250FSize: 25ml

Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications: Mix Ratio: 1:1Work Life: As a mix: 4 1/2 - 5 minutesSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity 25C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: ClearViscosity 25C: 130 poiseSpecific Gravity: 1.14

Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification: Typical Properties: 7 days cured at 24CColour: Black, changes to grey after mixingViscosity: putty/hand kneadablePot Life @24C: 20 minutesComprehensive Strength: 83 N/mm2Adhesive Tensile Shear: 5 N/mm2Cured Hardness Shore: D 75Dielectric Strength: volts/mil 300Solids: 100%Temperature Resistance: Wet: 49C, Dry: 121CSize: 50g

Bondloc High Strength Retaining Compound. Size: 50ml.

Bondloc high strength retaining Compound. Size: 10ml.

Bondloc B603 is an anaerobic formulation designed for direct use on as received parts such as those with protective films. It is an Oil tolerant retainer and is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod. Methacrylate.Colour: Green.Cure speed: <15 mins @ 20C.Viscosity: 125 cps.Gap fill: 0.1mm.Flash point: >85C.Shelf life: 12 months @ 20C.Specific gravity: 1.04.Max operating temp: -53C to150C. Cured Performance: Full Cure Time: 24 hours.Static shear (degreased): 28 N/mm.Static shear (oiled film): 21 - 24 N/mm. Size: 50ml.

Bondloc Bearing Fit Retaining Compound. Size: 50ml.

Bondloc Bearing Fit Retaining Compound. Size: 10ml.

Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure ( 6 bar) service and once cured can resist 350 Bar Pressure depending on gap size. Suitable for all formed in place applications such as gear box sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing, bearing gaps, outer housings, crank case and sump assemblies and flange pipe fittings. Specifications: Resin: Dimethacrylate.Colour: Orange paste.Cure speed with Activator: 10 mins.Cure speed without Activator: 15-30 mins.Viscosity - Brookfield Sp3 @ 20rpm: 50,000cps.Gap Fill/Max Threadform: 0.5mm/M36.Flash Point: >100C.Shelf Life: 12 months @ 20C.Specific Gravity: 1.10.Max operating temperature: -55C to 150C. Cured Performance: Full Cure Time: 24 hours @ 20C.Breakloose Strength: 8N.m.Static Shear Strength: 10N.m. Size: 50ml.

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85C.Shelf Life: 36 months @ 20C. Specific Gravity: 1.25.Max Operating Temperature: -55C to 150C. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.

Bondloc Hydraulic Seal Pneumatic Fittings. Size: 50ml.

Bondloc Hydraulic Seal Pneumatic Fittings. Size: 10ml.

Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Use B518 for dressing gaskets, spacers etc. Specifications: Resin: Modified Urethane Acrylate.Colour: Red Paste.Fixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: >3,500,000 cps.Gap fill: 0.5 mm.Flash point: >100C.Shelf life: 12 months @ 20C.Specific gravity: 1.13.Max operating temp: -55C to 150C. Cured Performance: Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2). Size: 50ml.

Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Specifications: Colour: Dark Purple PasteFixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: Paste.Gap fill: 0.5 mm.Flash point: >100C.Shelf life: 12 months @ 20C.Specific gravity: 1.10.Max operating temp: -55C to 150C. Cured Performance: Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2). Size: 50ml.

Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate.Colour: Yellow.Cure Speed with Activator: <10 minutes.Cure Speed without Activator: <15 mins @ 20C.Viscosity: >50,000 cps.Gap Fill: 0.05mm to 0.4mm.Flash Point: >100C.Shelf Life: 12 months @ 20C.Specific Gravity: 1.09.Max. Operating Temperature:150C. Cured Performance: Full Cure Time: 6-12 hours.Typical Breakaway Strength: >6 to <15 N/mm (2).Prevailing Torque: >3 to < 9 N/mm (2).Static Shear Strength: >5 to <15 N/mm (2). Size: 50ml.

Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Black Opaque LiquidSpecific Gravity: 25C 1.06 g/cmShelf life: 6 months unopenedViscosity @ 25C: 350 - 450 mPasSize: 20g

Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.1 g/cmShelf life: 12 months unopenedViscosity @ 25C: GelSize: 20g

Bondloc B415 is a high viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.06 g/cmShelf life: 12 months unopenedViscosity @ 25C: 1200 - 1800 Size: 20g

Bondloc B406 is a very Low Viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Liquid Properties: Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.06 g/cmShelf life: 12 months unopenedViscosity @ 25C: 25 - 35 mPas Size: 20g

Bondloc B401 is a Medium Viscosity Cyanoacrylate. It bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.06 g/cmShelf life: 12 months unopenedViscosity @ 25C: 90 - 120 Size: 20g

The Unibond 781746 holds up to 50Kg per roll and is suitable for both interior and exterior use. It is ideal for mounting hooks, signs, numbers, pictures, cable trunking, bathroom and car accessories. The tape can be used for bonding wood, ceramic tiles, metal, brick, stone, plaster and most plastics. Size: 19 mm x 1.5m.

The Unibond 781742 No More Nails Roll holds up to 20Kg per roll and is suitable for interior use only. It is ideal for mounting hooks, signs, numbers, pictures, cable trunking, bathroom accessories and car accessories. The tape can be used to bond wood, ceramic tiles, metal, brick, stone, plaster and most plastics. Size: 19 mm x 1.5m.

The Unibond 781740 holds up to 2.75Kg per strip and is suitable for both interior and exterior use. It is ideal for mounting hooks, signs, numbers, pictures, cable trunking, bathroom and car accessories. The tape can be used for bonding wood, ceramic tiles, metal, brick, stone, plaster and most plastics. Size: 10 strips (19 mm x 40 mm).

The Unibond 781739 holds up to 2Kg per strip and is suitable for both interior and exterior use. It can withstand high temperatures up to 95 C for short periods of time, and is ideal for mounting hooks, signs, numbers, car number plates, pictures, cable trunking, bathroom and car accessories. The tape can be used for bonding wood, ceramic tiles, metal, brick, stone, plaster and most plastics. Size: 10 Strips (20 mm x 40 mm). Removable.

1 x Unibond No More Nails Original Tube 234g

Unibond No More Nails is a high strength grab adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It is safe and easy-to-use, adheres to most building materials and can be used to fill minor gaps on uneven surfaces. No More Nails is ideal for fixing skirting boards, dado rails, architraves, coving, polystyrene mouldings, decorative wall panels, plasterboard, carpet and carpet grippers and worktops. Dries translucent.1 x Unibond No More Nails Invisible Cartridge 285g

1 x Unibond No More Nails Original Cartridge 365g

Unibond No More Nails Original Mini Tube 40ml Supplied in a handy mini tube.

Unibond No More Nails Exterior is a high strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It provides one of the strongest initial grabs available from Unibond, for un-paralleled support for heavier objects. It is extremely versatile and adheres to most building materials. Dries white. Suitable for exterior use.

1 x Gorilla Heavy-Duty Grab Adhesive White 80ml.

1 x Gorilla Heavy-Duty Grab Adhesive Clear 270ml.

EVO-STIK EVOSS Strong Stuff Weatherproof Adhesive is a High performance, single component, moisture curing, Modified Silane (MS) Polymer based adhesive. Will bond most surfaces even if both are impervious. Will bond damp surfaces and may even be used underwater. It has a low odour and cures to form an elastic rubber, with almost no shrinkage and low hazard. Bonds to most surfaces. Size - C20 cartridge

EVO-STIK Gripfill Solvent Free is a high strength, gap filling adhesive. Can be used on a wide range of building materials; one surface must be porous. Suitable for interior use.

EVO-STIK Gripfill Xtra is a superior strength, gap filling adhesive. Can be used on a wide range of building materials; one surface must be porous. Suitable for interior and exterior use.

The Gripfill gap filling adhesive will bond to almost any surface with excellent strength including vertical applications. Evo-stik Gripfill is a solvent-borne, filled rubber resin adhesive, developed to bond virtually any rigid materials together, regardless of the evenness of the surface. Gripfill is a high strength, one part, gap filling adhesive specially formulated to bond a large variety of materials. Evo-stik Gripfill is suitable for interior and exterior use (provided bond is covered) Bonds: Wood, plywood, hardboard, chipboard, laminated plastic, brick, rigid insulation material (except polystyrene), metal, stone breeze block, ceramics, concrete, sand/cement screeds, plasterboard, cement composite boards, G.R.P

1 x EVO-STIK Sticks Like Clear 290ml

1 x EVO-STIK Sticks Like White 290ml

The EVO-STIK Sticks Like Turbo is a fast setting. superior strength, all weather adhesive, suitable for use on a wide range of building materials. It sets in just 15 minutes and can resist extreme temperatures and movement and will even stick to wet surfaces. For interior and exterior use.

This EVERBUILD PINKGRIP is a solvent free, environmentally friendly formulation, white version of the brand leading Pinkgrip Direct Bond Adhesive. It has all the unique benefits of Pinkgrip and will stick just about anything on a building site, without the need for under pinning, thanks to the product's no-slump formula.It can be used for - bonding dado rails, architraves, and skirting, fixing wall cladding direct to internal wall surfaces or timber battens and fixing battens directly onto walls without fastenings.The adhesive will bond carpet gripper systems to most floors, without the need for nails or tacks. it will also bond stair nosing to concrete, or wooden stairs. This solvent free formulation is used for securing aluminium or other skin panels to the framework, or portable industrial buildings, and caravans.Pinkgrip has excellent adhesion/bond strength and adheres to most common surfaces. The enhanced slump resistance allows for quick simple direct bonding, without the need for temporary support in many applications.The product has a good “nip off” quality to prevent messy stringing of adhesive, and its high solids formulation gives excellent gap filling properties without shrinkage. The extended open time allows for easy repositioning after fixing.It will adhere to damp surfaces, and can be cleaned up with water Pinkgrip which has no hazardous solvents.Specifications: Colour: White.Size: 380ml.

Colour: Natural

Colour: Grey.

1 x Everbuild Stixall Extreme Power Easi Squeeze White 80ml

1 x Everbuild Stixall Extreme Power Easi Squeeze Crystal Clear 80ml

Colour: Clear.

Colour: Brown.

Colour: Black.

Everbuild Pinkgrip SF direct bond solvent-free gap filling adhesive specifically formulated for the professional user. The product can be used to replace mechanical fixings in a wide variety of building and home improvement applications for bonding wood, brick, plaster, plasterboard, polystyrene, Styrofoam and most plastics, metals and numerous other surfaces and is designed primarily for internal use. Approximately 12 linear meters for a 6mm diameter bead.

Pinkgrip Dry Fix is a revolutionary new type of fast curing, adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other sheet materials such as Roof Decking and Floorboards. Pinkgrip Dry Fix provides significant labour saving and convenience benefits when compared to traditional dry wall adhesives. It will bond to most common building substrates; can be applied horizontally or vertically to boards, walls or battens/beams. The foam expands very minimally on application but enough to fill any gaps on uneven surfaces. Pinkgrip Dry Fix can be applied using an Everbuild Dry Fix Applicator Gun.

Sika Multi Stick MS is an exciting new grab adhesive based on new SPUR technology (Silyl-terminated PUR technology). This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive. Capable of bonding to almost all materials, porous and non-porous, such as: Glass, Marble, Granite, Mirrors, Bricks, Stone, Plasterboard, Concrete, All Metals, All Hard Plastics, Ceramics, Fibreglass, Timber and much, much more. Including applications underwater.

Everbuild Maximum Torque Adhesive is the ultimate high grab building adhesive. The unique polymer blend gives incredible initial grab, typically double that of most grab adhesives on the market today, eliminating the need for temporary support in most applications. It has the ability to bond basically everything to anything in virtually all conditions, even under water or in the rain. Cures to form a tough flexible elastic rubber, which also makes it suitable for use as a sealant.

Everbuild Griptite is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, PVCu and certain plastics. Benefits;Solvent based formula - quick drying / high early bond strength.Excellent adhesion/bond strength - adheres to most common surfaces.Good early grab properties - usable in both vertical and horizontal positions.High solids formulation - excellent gap filling properties without shrinkage.Suitable for use where both surfaces are non-porous.Excellent external weathering properties-Suitable for exterior use Ideal for:Bonding dado rails, architraves and skirting. Fixing parquet and cork flooring.Fixing wall cladding direct to internal wall surfaces or timber battens.Fixing battens directly onto walls without fastenings.Bonding carpet gripper systems to most floors without the need for nails or tacks.Bonding stair nosing to concrete or wooden stairs.Fixing polyester, wood, PVCu or metal thresholds.Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. Limitations;Do not use on damp surfaces: use EVERBUILD GUN A NAIL.Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item. Solvents present may attack sensitive plastics. If in doubt, rest a small area first. C4: 350ml.

Everbuild Gun A Nail Standard is a high strength, gap filling multipurpose building adhesive based on a tackified solvent free system for use in a wide variety of building and home improvement applications. Gun A Nail Standard can be used where at least one of the substrates to be bonded is porous. BENEFITS- Solvent-free - environmentally friendly formulation- Excellent adhesion/bond strength - adheres to most common surfaces.- Exceptional early grab properties - usable in both vertical and horizontal positions. - High solids formulation - excellent gap filling properties without shrinkage.- Extended open time - allows for easy repositioning after fixing- Will adhere to damp surfaces.- Water clean up - no hazardous solvents. AREAS FOR USE- Bonding dado rails, architraves and skirting- Fixing wall cladding direct to internal wall surfaces or timber battens- Fixing battens directly onto walls without fastenings- Bonding carpet gripper systems to most floors without the need for nails or tacks- Bonding stair nosing to concrete or wooden stairs- Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

Pinkgrip Dry Fix Applicator Gun - for use with Pinkgrip Dry Fix Fast Cure Dry Wall Adhesive.

Everbuild Clear Fix is a clear hybrid polymer grab adhesive that has the ability to bond just about everything in both interior and exterior applications. With added UV stabilisers to ensure the product doesn't yellow over time, Clear Fix is the ideal choice for applications where the colour of the product may be seen. Clear Fix is a versatile product which can be used in almost every application - even when immersed under water! It is quick curing, resistant to temperature extremes, over-paintable and totally water and weatherproof. Size: 290ml.Colour: Clear.

1 x Gorilla Heavy-Duty Grab Adhesive - White 290ml

Colour: White.

Pinkgrip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive Size: 350ml cartridge.

The Everbuild Instant Nails is a high strength, solvent-free, gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications. Dries white and may be overpainted if required. Instant Nails should be at room temperature when you begin using the product. If Instant Nails has been stored in cool conditions it should be placed in a warm room/bucket of warm water before use to gently heat up to working temperature. Do NOT apply Instant Nails at temperatures below4C.

Tacwise Hot Melt Glue Sticks are made from high-quality materials and are ideal for a range of applications from arts/crafts and DIY, to plastic, glass and paperwork. The clear, fast-heating sticks are compatible with the Tacwise H4-7 Cordless Glue Gun as well as many other leading brands taking 7mm sticks. Each box contains 100 glue sticks which are supplied in a UK Royal Mail large letter sized box, making it easier to send/receive. Specification: Diameter: 7mmLength: 150mmPack Quantity: 100

The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.

The STA1GS10DT Dual Temp Glue Sticks have the following specifications: Length: 100mm (4 inches). Diameter: 7mm. Pack of 24.

Colour: Transparent.Diameter: 7mm.Length: 65mm.Pack size: 125g (Approx 46 glue sticks)Compatible with the Rapid EG Point Glue Gun.

The Rapid GEN-T Glue Sticks are supplied in a 2.5kg bag. Size: 12mm Diameter x 295mm Length.