ROCOL FOODLUBE MultiPaste Spray is a white, non-toxic lubricating spray that applies an anti-seize paste, ideal for use in food, pharmaceutical and other clean environments. Applications include the assembly and lubrication of: threads, bushes, slides, small open gears and fasteners. Prevents galling, pick-up and seizure. It is also suitable for use as a food-grade drilling, tapping and cutting lubricant particularly when maintenance has to be carried out in the process area. Ideal for use on stainless steel. Extremely tenacious, resists water wash out. Utilises DETEX technology, x-ray and metal detectable plastic aerosol caps and actuators reduces risk of plastic contamination. NSF H1 registered, ISO 21469, Halal and Kosher certified. Specification Temperature Range: -30C to450C

1 x ROCOL FOODLUBE MultiPaste 85g

ROCOL FOODLUBE Dismantling Spray is a non-toxic, fasting-acting penetrating lubricant for corroded threaded fasteners and other seized components. Short-term corrosion protection is provided by a light, residual film. With a wide operating temperature range from -20C to110C. Its fast acting formula provides quick effective release of seized and corroded threaded fasteners. Only use in well ventilated areas and do not apply to very hot surfaces. Does not contain: mineral hydrocarbons, animal derived materials, nut oils or genetically modified ingredients. Store below50C, out of direct sunlight, has a shelf life is 5 years from date of manufacture. NSF H1 registered for incidental contact with food, making it ideal for use in the food, pharmaceutical and other clean industries where a non-toxic product is required or preferred. It is also ISO 21469, Halal and Kosher certified.

ROCOL FOODLUBE Spray is a high-performance versatile lubricant spray for all-round light to medium lubrication of most moving parts, including small bearings and slides. Offers excellent de-watering properties, corrosion protection and provides a long-lasting protective film. Temperature range - 20C to 110C. NSF H1 registered, ISO 21469, Halal and Kosher certified. Size: 300ml.

ROCOL FOODLUBE Hi-Temp Grease 2 is a silicone grease fortified with PTFE, suitable for high temperature applications. Designed for the lubrication of all types of slower bearings and sliding surfaces. Ideal for rubbers and plastics. Offers good anti-wear properties and good chemical resistance. It is also highly resistant to water washout. Utilises DETEX technology, x-ray and metal detectable plastic caps and actuators reduces risk of plastic contamination. NSF H1 registered, ISO 21469, Halal and Kosher certified. Specification Temperature Range: -20C to 200CSize: 380g

ROCOL FOODLUBE Universal is a high performance, multi-purpose, food grade bearing grease which promises maximum bearing life. A truly universal extreme pressure grease designed for the enhanced lubrication of all types of ball, roller and plain bearings. Offers superior load and wear properties whilst providing excellent corrosion protection. It is also highly resistant to water washout. Utilises DETEX technology, x-ray and metal detectable plastic caps and actuators reduces risk of plastic contamination. NSF H1 registered, ISO 21469, Halal and Kosher certified. Specification Temperature Range - 50C to 160CSize: 380g

ROCOL ANTI-SEIZE Stainless is a nickel-free paste that offers excellent anti-seize properties. Does not contain copper and exhibits extremely low sulphur and chlorine levels. Provides even torque and prevents galling and pick-up on assembly. Protects against wet conditions and chemical attack Specifically designed for stainless steel, nimonic and silver-coated fasteners, particularly those subjected to high temperatures for long periods in the aerospace, automotive and power generation industries. Ideal for use on aerospace alloys. Specification Temperature Range: - 40C to 1,000CCoefficient of Friction: 0.085

1 x ROCOL ANTI-SEIZE Compound Tin 500g

1 x ROCOL ANTI-SEIZE Compound Tube 85g

ROCOL PENETRATING Spray is a powerful release agent for corroded threaded fasteners and other seized components. Reinforced with molybdenum disulphide to aid disassembly of components. Powerful jet application for fasting-acting penetration, even after prolonged periods of seizure. Imparts a light residual film for short term corrosion protection. Provides efficient loosening of fasteners when seized due to rust, scale, dirt or grime.

ROCOL ANTI-SEIZE Spray is a copper-based, lead-free, anti-seize aerosol. Reinforced with graphite and molybdenum disulphide to further enhance its performance. Prevents pick-up and seizure. Offers excellent water resistance, even when submerged. Designed for use on all static fasteners and mechanisms prone to seizure. Ideal for use in high temperature environments such as furnaces and exhaust systems, as well as dockside and oil rig applications. Specification Temperature Range: -10C to1,100CCoefficient of Friction: 0.15

SAPPHIRE Hi-Load 2 Bearing Grease is a heavy-duty soap grease containing molybdenum disulphide for maximum bearing life. It offers extreme load and wear performance with extended lubrication intervals. Ideal for slow-moving bearings subjected to heavy loads, shock and vibration. Specification: Temperature Range: -30C to150C.1 x ROCOL SAPPHIRE Hi-Load 2 Bearing Grease 400g

ROCOL SAPPHIRE Aqua 2 Bearing Grease is a high performance grease designed to give superior resistance to water washout. For use in all types of ball, roller and plain bearings. SAPPHIRE Aqua 2 excels in applications such as scrapers, rakes, dockside cranes, water pumps, boat trailers and similar applications where bearings, pins, bushes, slides, etc. are subjected to extreme wet conditions. Specification Temperature Range: - 20C to 150C

1 x ROCOL SAPPHIRE 1 Bearing Grease 400g

ROCOL SAPPHIRE Premier Lubricating Grease is a high-performance, fully synthetic multipurpose grease, designed for all types of antifriction bearings operating in extreme conditions. Fortified with PTFE. It provides extended lubrication intervals and is compatible with most plastics and rubbers. Ideal for high speed applications such as fan and motor bearings. Specification Temperature Range: -50C to200C

1 x ROCOL SAPPHIRE Aqua-Sil Bearing Grease Tube 85g

ROCOL SAPPHIRE Extreme is a high performance, long life bearing grease for use in extreme environments. It has a non-melting, clay thickened formula that has been fortified with molybdenum disulphide. Particularly suitable for high temperature bearings operating in extreme conditions such as shock loads, vibration and wet environments. Designed for all types of ball, roller and plain bearings typically found in industries such as steelworks, quarries, mining, marine, docks, agriculture, construction, brick and tile works and other industries particularly where ovens or similar heavy-duty, high temperature applications are found. SAPPHIRE Extreme excels in applications such as furnaces, kiln cars, crushers, screens, presses, loaders, scrapers, wagons and similar applications where bearings, pins, bushes etc. are subjected to extreme conditions. Specification Temperature Range: -10C to235C

1 x ROCOL SAPPHIRE 2 Bearing Grease Tub 5kg

1 x ROCOL SAPPHIRE 2 Bearing Grease Tube 400g

ROCOL SAPPHIRE Hi-Pressure Plain Bearing Grease is a long life, clay thickened bearing grease that contains molybdenum disulphide. It offers excellent corrosion protection with high resistance to water wash out. Suitable for slow moving plain bearings subjected to heavy loads, shock and vibration. It also provides extended lubrication intervals. Specification Temperature Range: -20 to150

ROCOL OXYLUBE Spray provides a very high content molybdenum disulphide film. It is designed to lubricate sliding mechanisms, particularly in oxygen or vacuum environments, such as: plain bearings, pins, cams, slides, etc. Suitable for applications where contamination by aggressive chemicals or petroleum based solvents, oils and greases would destroy conventional lubricants. Specification Temperature Range: - 200C to450CLoad Resistance: up to 7,000 kg/cm2

ROCOL MTLM Assembly Running-In-Paste is a very high content molybdenum disulphide paste. Designed to give a tough, wear-resistant greasy film that provides anti-seize protection, eases assembly and provides complete protection during the critical start-up and running-in periods. Meets the specification of DEFSTAN 80-81/2. Specification Temperature Range: -50C to 450CLoad Resistance: up to 7,000 kg/cm2

1 x ROCOL DRY MOLY PASTE Tin 750g

1 x ROCOL DRY MOLY PASTE Tube 100g

The RIDGID Model 418 Oiler has durable pump assembly and a heavy-duty reservoir, that has been designed to increase productivity. The pump assembly allows for 50% more oil per stroke than other hand-held oilers, for a longer die life. The 418 oiler features a patent pending, fastenerless twist and lock drip pan that easily locks in place. The integral moulded body eliminates leaks at the hose-reservoir connection and it has a convenient anti-slip grip design with integral hood for easy hanging. The oiler has a die cast, heavy-duty body with swivel nozzle, so there are no exposed parts providing a longer working life. It has an ergonomic 2-finger trigger design that reduces user fatigue. The material withstands abrasion, it is lighter than metal and does not rust, the reservoir will not crack or leak. Material is so strong that under normal use, no dents will form (on impact) and the shape will not change over time. As a result, the drip pan will fit squarely on the reservoir time after time. Supplied with 5 litres of oil. Specification: Pan Diameter: 362mm (14.1/4in).Pan Depth: 222mm (8.3/4in).Hose Length: 1.39m (55in).Capacity: 4.54 litres (1 gallon).

PlusGas Formula A Fast Release is no ordinary penetrating oil. It is faster, safer and more powerful than any other dismantling lubricant. PlusGas is the penetrating oil used by mechanics, engineers, builders, plumbers, locksmiths and DIY enthusiasts. Uses include: Tool cleaner/maintainerLawn mower cleanerRust/corrosion Prevention agentLubricant to aid screw and bolt assemblyCleans grease build-up and leaves protective filmTemporary lubricant (oil rather than grease)Reduces squeaks and rattles on machineryDisplaces moistureHelps prevent re-seizing of treated partsPre-treatment of equipment to be stored (will need degreasing prior to use) Size.500ml.

Size.400ml Aerosol.

Size.200ml Aerosol.

PlastiKote Trade PTFE Spray is a universal lubricant for mechanical parts that are made from metal and plastic. Helps to prevent wear and jamming. It has a water-repellent formula that offers excellent mechanical and thermal stability.

MoTip Pro PTFE Dry Spray treats mechanical parts of metal and plastic, where no residues of oil or grease are desired. PTFE Dry prevents wear and sticking. It has a very low friction factor, an excellent adhesion and is resistant to weather influences. It leaves no residues of oil or grease (dry film). Suitable for parts which are liable to light load and low speed. It can also be used as a release agent for moulds, where the use of silicone is not desired.

The Master Lock 2300D Lock Lubricant provides a long lasting protective shield against dust, dirt, salt, and moisture to prevent rust and corrosion, and to loosen stuck parts. The precision nozzle is designed specifically for precise application inside locking devices. This lubricant is ideal for padlocks, door hardware, automotive, marine, and multipurpose applications. Size: 7ml.

The Lumatic VSLGH Contractors Side Lever Grease Gun is suitable for 400cc cartridge loading or 500cc bulk. Complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and 4 jaw hydraulic connector. Capacity: 400cc.

Lumatic SRT6S Straight Rigid Delivery Tube is 6in long with 1/8in BSP male thread connection at each end.

The Lumatic SOG1 is a Suction Oil Gun which is plunger operated for gearbox filling, and emptying. The gun has a 500cc capacity, a steel body, and is supplied with a flexible suction tube.

Slide-on connector with knuckle joint for use with both standard and industrial type hook-on grease nipples. 1/8in BSP Thread Connection.

This Flexible Tube has the following specification: Length: 230mm (9inThread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

9in Long.

This Flexible Tube has the following specification: Length: 510mm (20in)Thread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

This Flexible Tube has the following specification: Length: 300mm (12in)Thread: 1/8 BSPMax Pressure: 15000 psi Material: Rubber

12in Long.

Rotary fitting to allow rotation of grease gun connectors without tightening or damaging flexible hoses. 1/8in BSP Male/Female Thread Connection.

For ease of use, the Lumatic Industrial Air Operated Grease Gun provides a continuous flow of grease. It has been designed for standard 400g grease cartridges (or 500g bulk fill). Supplied with a rigid tube, precision connector and UK standard air coupling. Pressure Ratio: 40:1.Recommended Air Pressure: 4-10 bar.

This Lumatic NGUS is a metal bodied, telescopic type hand grease gun with universal connector. Capacity: 125cc.

Telescopic type metal bodied hand grease gun with push on connector. Capacity: 60cc.

The Lumatic Polyethylene Oil Measure Jug With Spout has the following specification: Capacity: 5 Litre.

The Lumatic Polyethylene Oil Measure Jug With Spout has the following specification: Capacity: 2 Litre.

The Lumatic Polyethylene Oil Measure Jug With Spout has the following specification: Capacity: 1 Litre.

Thread 1/4in WHIT.

Thread 3/8in UNF.

Thread 5/16in UNF.

Thread 1/4in UNF.

Thread 1/4in BSP.

Angle 90° .Thread 1/8in BSP.

Angle 45 Thread - 1/8in BSP.

Thread 1/4in BSP.

Thread 1/8in BSP.

Hook-on connector for use with both standard and industrial type hook-on grease nipples. 1/8in BSP Thread Connection.

Thread M 8 x 1.25. (8mm).

Thread M 8x1(8mm).

Thread M 6x1.(6mm).

Thread M10 x 1.5. (10mm).

Thread M 10 x 1. (10mm).

Thread 3/8in BSF.

Thread 5/16in BSF.

Thread 1/4in BSF.

The Lumatic Polythene Anti Splash Funnel has the following specification: Diameter: 230mm (9in).

The Lumatic Polythene Anti Splash Funnel has the following specification: Diameter: 150mm (6in).

The Lumatic BSLGH Standard Side Lever Grease Gun, complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and hydraulic connector. International cartridge loading, accepts a 400cc cartridge. Made in Germany.

A telescopic type metal bodied hand grease gun with a push on connector. Capacity: 120cc.

This Lumatic 555S is a lightweight lever type mini pistol grease gun with a delivery tube which can be rotated through 360 and is designed to be used one-handed. Complete with air release valve, rigid tube, and hydraulic connector for bulk filling. Develop's 500 Bar of pressure.

This Lumatic cast iron rotary pump suits a 205 Litre drum. It is suitable for diesel, motor, gearbox, and hydraulic oils.

1 x Lumatic Safe-Lock H.D. Mato Grease Coupler (32mm Standard Reach).

The Lumatic Lube-Shuttle Multi Purpose Grease has a mineral oil base for universal application. Includes anti-oxidants and corrosion inhibitors as well as polymers to improve adhesion. It offers good corrosion protection, high mechanical stability and high pressure capabilities. Fits LUM3021030 LUM3025090 Lube-Shuttle Grease Guns. Specification Temperature Range: -30C to130C. Size: 400g Screw Top Cartridge.Conforms to DIN 51502, NLGI Grade 2.

The Lumatic Lube-Shuttle One Handed Grease Gun has a zinc plated steel barrel for Lube-Shuttle system cartridges, with an ergonomically designed pistol grip. It is environmentally friendly with tool free cartridge opening via a screwcap, making the cartridge reusable. The design provides optimum use of all grease in the cartridge with fast, clean loading and unloading without opening the gun. Comes with RH-30C single wire hose and precision hydraulic connector, thread 1/8in. TÜV DLG Approved.Maximum Pressure Capability: 300 Bar/4,350 psi.

The Lumatic Lube-Shuttle Side Lever Grease Gun for use with Lube-Shuttle 400g cartridges. Features a high quality zinc plated steel barrel body and an ergonomic hand grip. It is environmentally friendly with tool free cartridge opening via a screwcap, making the cartridge reusable. The design provides optimum use of all grease in the cartridge with fast, clean loading and unloading without opening the gun. Comes with RH-30C single wire hose and precision hydraulic connector, thread 1/8in. TÜV DLG Approved. Working Pressure: 400 Bar/5,800 psi.Maximum Pressure Capability: 800 Bar/11,600 psi.

3-IN-ONE Anti-Seize Copper Grease is a high-temperature lubricant and anti-seize compound that protects metal components from corrosion, rust, water, heat and acid. Capable of withstanding extreme temperatures, this grease is also enhanced with graphite for even better lubrication across the entire temperature range. Once applied, a protective coating is formed which will not wash off or burn, therefore reducing metal-to-metal friction. Also assists with the assembly and future dismantling of threaded fastenings.

3-IN-ONE Heavy-Duty Cleaner Degreaser has a deep penetrating citrus foaming action that quickly removes grease, oil, dirt and grime from engines, tools and equipment. Works great on lawnmowers, chainsaws, power equipment, automotive and truck engines and parts, as well as gears, chains, pulleys and industrial machinery.

3-IN-ONE high performance lubricant is an advanced PTFE synthetic flouropolymer formula which provides outstanding lubrication and corrosion protection under extreme temperature, pressure and motion. Friction and wear is dramatically reduced on all moving parts which also extends the life of tools and machinery. Suitable for use on all metal and non-metal surfaces including wood, glass, vinyl, rubber and plastics (except polycarbonate and polystyrene). This high performance lubricant will also drive out moisture and is capable of withstanding extreme temperature from -45 to235 C. Size 400ml Spray Can

3-IN-ONE Penetrant Spray has a fast acting formula, frees rusted or seized fittings. A must for the toolbox kit for anyone working with metal fittings and components, pipe work or engines. Its formula penetrates deeply and helps to free off stuck or seized nuts, bolts and fixings. Size: 400ml.

1 x 3-IN-ONE Original Multi-Purpose Drip Oil 100ml

3-IN-ONE Multi-Purpose Oil Aerosol with PTFE is a superior lubricant that offers long lasting protection. Ideal for chains, cables and gear mechanisms. Size: 250ml.

3-IN-ONE Original Spray Oil provides a specially formulated lubricant in a convenient aerosol can. It cleans as well as protecting surfaces from rust and corrosion. It can be used to clean metal, lubricate moving parts or stop squeaks.

1 x 3-IN-ONE Original Multi-Purpose Drip Oil 200ml

5L 250mm Spout

2L 185mm Spout

1L 185mm Spout

The Faithfull Oil Suction Gun Metal is designed for the easy removal and replacement of oil from sumps, gearboxes and axles on all types of machinery and vehicles.This black finish body with anti-slip bands, a steel body is fitted with a 300mm flexible extractor tube to enable easy access to awkward locations.The suction gun is suitable for use with engine, differential and transmission oils, complete with 300mm flexible extractor tube and is ideal for vehicle and machinery use. Specification: Capacity: 500 ml (16 fl. oz).

The Faithfull Heavy-Duty Piston Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material. Recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids, antifreeze and liquid waxes. Specification: Total Length: 1150mmSuction Tube Length: 850mmDischarge Tube Length: 1200mm approx. Delivery Volume: 20LPM approx.

The Faithfull DIY Manual Squeeze Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material. It is recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids and antifreeze. Specification: Total Length: 530mmSuction Tube Length: 385mm

The Faithfull Plastic Rotary Pump is an economical and simple solution for the manual dispensing of light viscosity oils and antifreeze from drums or storage tanks. Complete with a 2in bung adaptor for a secure hold and a built-in strainer fitted at the suction tube head to filter out any contaminants. A telescopic suction tube extends to a maximum length of 1m. Not for use with acid, chemicals or solvents. Specification: Pipe Length: 1000mm

The Faithfull Cast Iron Rotary Pump is an economical and simple solution for the manual dispensing of diesel and oil, primarily from a drum, but also from other types of storage tanks. Complete with a 2in bung adaptor for a secure hold and a built-in strainer to filter out any contaminants. Robust cast iron construction and a telescopic suction tube, that when extended can reach a maximum length of 1m. Due to the cast iron construction this pump is not suitable for handling liquids with a flash point below 55C. Specification: Pipe Length: 1000mmMax. Capacity: 205 litresMax. Flow Rate: 310ml per revolutionMax. Viscosity: 410cStOils up to: SAE140Temperature Range: -10C to55C

This Faithfull Rotary Barrel Pump features a lightweight corrosion resistant polypropylene pump with Ryton veins, and has a threaded polypropylene 3-piece suction tube (114cm long) and an internal strainer. It is supplied with two bung adaptors to suit 15–55 gallon drums.This rotary barrel pump is suitable for use with petroleum products, and water-based chemicals: heavy light oils, heating oils, motor oils, kerosene, diesel, anti-freeze, windshield washer fluid, mild acids and alkali solutions.Specification: Fits Drums: 50-250 Litres.

The Faithfull FAIOCP50205L Barrel Pump has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout and telescopic suction tube adjusting to suit the barrel size.This Faithfull product is for use with petroleum-based liquids only. Specifications: Delivers: 300ml (10 fl oz) per stroke.Fits: 50 to 250 Litre (15 - 55 gal) drums.

1 x Faithfull Lever Type Oil Can 500ml

This Faithfull Transparent Oil Can is manufactured from high strength ABS, allowing a clear view of the contents at a glance.The high-pressure trigger action pump is fitted with a flexible spout and a brass nozzle, ideal for lubricating round corners and into tight box sections for precise application of the lubricant. Suitable for use with all kinds of lubricating oil. Specifications: Capacity: 350ml.Nozzle length: 80mm.

Size: 300ml (1/2pint)

1 x Faithfull Pistol Type Oil Can 125ml

Thread: M8 x 1.25

Thread: M8 x 1.0

Thread: M6 x 1.0