These iINDFB8 aluminium oxide stones have the same grit throughout.Size.8 x 2 x 1 in.Grade. Fine.

These INDCB8 aluminium oxide stones have the same grit throughout.Type.CB8Size.8 x 2 x 1 in.Grade.Coarse.

These INDCB24 Aluminium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2n.Grade: Coarse.

Round Tapered305mm (12 in)

Oval section305mm (12 in)

Flat Tapered260mm (10 1/2 in)

Plain rubbing bricks are ideal for dressing grinding wheels and for cleaning and scouring metal and alloy castings.Type: PlainSize: 200 x 50 x 50mm (8 x 2 x 2in)

Most commonly used to clean or dress floortiles and concrete floors.Type: FlutedSize: 200 x 50 x 50mm (8 x 2 x 2in)

To avoid workshop dust and unwanted oil deposits, this crafted beech oilstone box is designed to store any standard 200 x 50 x 25mm (8 x 2 x 1in) oilstone. Internal corners can be cut to suit other sizes.Internal size: 205x50x25mm.

This Faithfull 200mm Oilstone, complete with oil and Honing Guide Kit, makes the ideal kit for sharpening all HSS, carbon steel chisels and plane blades from 3 to 67mm wide.The honing guide makes it easy to restore a perfect cutting edge, even for newcomers to the task. Specifications: Size: 200 x 50 x 25mm (8 x 2 x 1in).Grit: Coarse 120, Medium 180.

Combination oilstone made from aluminium oxide with one medium face and one coarse face. Can be used either dry or with a light oil. Size: 200 x 50 x 25mm (8 x 2 x 1in) Grade: Medium / Coarse

Designed specially for use by carpenters and joiners. Combination oilstones are made from aluminium oxide. This is for use with oil when sharpening chisels and plane irons. Size: 100 x 25 x 12.5mm (4 x 1 x 1/2in)Grade: Fine / Coarse.

This Faithfull Honing Guide is used in conjunction with either an oil, water or diamond sharpening stone to ensure the perfect cutting angle when restoring a cutting edge to straight edged chisels, bevel edged chisels and plane irons from 3mm to 67mm wide.Use the inner jaws for chisels, a blade projection of 30mm will give a 30 degree angle and 40mm will result in a 25 degree angle. Use the outer jaws for plane irons with a projection of 38mm for a 30-degree angle or 50mm for a 25-degree angle.

The Faithfull Curved Diamond Whetstone is a uniquely shaped stone specially designed for the sharpening of wood turning tools and carving chisels. Its curved diamond surface lets you sharpen both concave and convex surfaces. The small end has a radius of approx. 3mm (1/8in) and tapers up to the large end with a radius of 28mm (1.1/8in). The double sided steel stone is coated with mono crystalline diamond in 600G medium and 1200G fine grits. The 600G grit is for sharpening blunt edges and the 1200G grit is for final honing of the edge. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Size: 250 x 56 x 17mm

The Faithfull Diamond Whetstone Kit contains 3 stones for quick, easy and effortless sharpening of any blade. The 70 x 200mm metal stones are electroplated with monocrystalline diamond in three grits, 400G Coarse, 600G Medium and 1000G Fine. The ABS plastic base has non-slip pads for use on most surfaces, and each stone can be removed to be used separately. The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary. Blade Size: 70 x 200mmOverall Size: 232 x 225 x 40mm

The Faithfull Diamond stones will sharpen steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Diamond stones may be used dry or with water as a lubricant. Always dry the stone after use and before storing. Clean the stone occasionally, using soapy water and a soft brush. A 4-sided diamond sharpening stone supplied with a worksafe surface gripping base for quick, easy and effortless sharpening of any blade.Grits: Fine (red) 600 grit, Medium (green) 400 grit, Coarse (yellow) 300 grit and Extra Coarse (blue) 200 grit.

Faithfull Replacement Diamond Whetstone for FAIDWKIT (Diamond Stone, Docking Station and storage wallet). The double-sided 8mm thick 70mm x 200mm metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse and 1000G Fine. Will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary.

The Faithfull Diamond Sharpening Stone Kit is ideal for quick, easy and effortless sharpening of any blade and many other tools. The double sided 8mm thick metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse 1000G Fine, each can be easily accessed by simply releasing the stone from the docking station and turning it over.The benefit of this stone over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edged on precision cutting tools such as wood chisels and plane irons.Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain and may be used dry or with water as a lubricant. Used for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge.The docking station is constructed using three solid, non-slip rubber pads and robust steel rods that are fitted with easy grip screw nuts for precise and firm fixing of the stone. The docking station is adjustable to accept stones from 135 to 216mm in length and has a 6mm deep recess to provide a secure and firm base for all sharpening operations.Supplied with a handy storage wallet.

The Faithfull Diamond Folding Whetstone is supplied in a handy storage case that unfolds to form a handle. The case protects the diamond stone and allows it to be kept in a pocket ready for use. Quickly restores a sharp edge to any blunt tool. The 400 and 600 grit surfaces are suitable for general purpose sharpening of knives, scissors, cutting blades, carbon steel, HSS and tungsten carbide tools, etc. Can be used dry or with water as a lubricant, no oils are necessary.

The Faithfull Curved Diamond Whetstone has a compact design and is ideal for use on flat and curved blades. It features two flat sides and two removable diamond rods. The two flat sides have 400G coarse and 600G medium grits and can be used on chisels, knives, scissors and many other cutting blades. The 600G 6mm and 12mm diameter diamond rods are ideal for honing concave wood carving chisels and moulding plane blades. The rods can be removed to be used individually or rotated in the holder to increase working life. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Four Diamond Surfaces: 2 x Flat: 20 x 100mm 400G, 20 x 100mm 600G, 2 x Rods: 6 x 100mm 600G, 12 x 100mm 600GOverall Size: 103 x 40 x 12mm

The Red side is suitable for all woodworking tools, carbide tooling, router bits, 3D bits etc.The Blue side is suitable for all general carpentry, tin snips, wood flat bits, augers, garden edge tools etc. Blue: Coarse 325g, 45 micronRed: Fine 600g, 25 micron

Red: Fine 600g, 25 micron

The Green side is suitable for quality knives, woodworking tools, T/C tooling etc.The Red side is suitable for all woodworking tools, carbide tooling, router bits, 3D bits etc. Red: Fine 600g, 25 micronGreen: Extra Fine 1200g, 9 micron

The green side (Extra Fine) is suitable for general carpenters tools, wood flat bits, auger bits, garden tools, darts, fish hooks, masonry drills etc.The blue side (Coarse) is suitable for knives, woodworking tools, T/C tooling etc. Blue: Coarse 325g, 45 micronGreen: Extra Fine 1200g, 9 micron

Green: Extra Fine 1200g, 9 micron

Blue: Coarse 325g, 45 micron

Colour: Black.Grade: Extra Coarse (220g).

Red Fine 600g.

Set of 3 consists of :- 1x Green Extra Fine. 1200g.1 x Red Fine. 600g.1 x Blue Coarse. 325g.

Green Extra Fine 1200g

Blue Coarse 325g.

Plastic caseBlack Extra Coarse. 220g. 60 micron

Hardwood case Black Extra Coarse. 220g, 60 micron

Plastic caseRed Fine. 600g, 25 micron .

Hardwood case Red Fine 600g. 25 micron

Plastic caseGreen Extra Fine 1200g, 9 micron.

Plastic caseBlue Coarse 325g, 45 micron

Hardwood case Blue Coarse 325g, 45 micron

The Red side is suitable for sharpening all woodworking tools, carbide tooling, router bits, 3D bits, woodworking and kitchen knives. The Blue side is suitable for sharpening general carpentry tools, tin snips, wood flat bits, Stanley knives, masonry drills, chisels, garden tools, fish hooks, darts etc. Blue: Coarse 325g, 45 micronRed: Fine 600g, 25 micron

The Blue side is suitable for general carpentry tools, tinsnips, side cutters, wood bits, garden tools etc. The Black is suitable for damaged woodworking tools, cold chisels, axes, lawn edgers etc. Black: Extra Coarse 220g, 60 micronBlue: Coarse 325g, 45 micron

Black Extra Coarse. 220 grit.Size 110mm.

Grit. One Side Red Fine, other side Blue Coarse. (600 x 325 grit)Size 110mm.

Red Fine. 600grit.Size 110mm.

Grit. One Side Red Fine, other side Green extra fine. (600 x 1200 grit)Size 110mm.

Green Extra Fine (1200 grit).Size 110mm

Grit: One side Blue Coarse, other side Black Extra Coarse. (325 x 220 grit)Size 110mm

Blue Coarse (325 grit).Size 110mm.

Extra Coarse.Black. 220g.

Fine.Red. 600g.

Extra Fine.Green. 1200g.

Coarse.Blue. 325g.

Red Fine.Size.355mm (14 in).

Red Fine.Size. 300mm (12 in).

Length: 200mm (8in)Red: Fine 600g, 25 micron

Length: 200mm (8in)Green: Extra Fine 1200g, 9 micron

Length: 200mm (8in)Blue: Coarse 325g, 45 micron

Length: 150mm (6in)Red: Fine 600g, 25 micron

Length: 150mm (6in)Green: Extra Fine 1200g, 9 micron

Length: 150mm (6in)Blue: Coarse 325g, 45 micron

Red Fine.

Green Extra Fine

Blue Coarse

Type. Mini-HoneSize. 83 x 25 x 0.5mmGrit. Fine

Type. Mini-HoneSize. 83 x 25 x 0.5 mmGrit. Extra Fine.

Type. Mini-HoneSize. 83 x 25 x 0.5mmGrit. Coarse.

Adjustable base to fit 200mm (8in) and 250mm (10in) double sided Duosharp whetstones.

3 piece professional diamond stone set, extremely durable.Quick, easy and effortless sharpening with no oil lubrication needed (water only).Includes Extra Fine, Fine and Coarse stones. Size 150 x 50mm (6 x 2 in).

The Multi-Sharp ATT3500 Diamond Tool Sharpener is highly versatile, suitable for many applications around the home, garden, for DIY and sports. It has 3 sharpening surfaces (flat, grooved, and half-round), coated in high quality diamond particles, which provide excellent durability. Also, suitable for sharpening multi-tool blades, pen/utility knives; carbide tile cutters, pointed tools and secateurs/loppers.The ATT3500's diamond surface sharpen's the hardest materials, including carbide, ceramic and stainless steel. The sharpening surface retain their flatness, and are extremely long-lasting. The anodised aluminium case protects the diamond rod when not in use. The rod is lockable at any length. Specification: Diamond Rod Length: 6.7cm (2.6in).

The ATT3002 Multi-Sharp Replacement Grinding Wheel fits the 3001 Wetstone Water Cooled Chisel/Plane Sharpener.Aluminium Oxide for resharpening chisel and plane blades, small tools, knives, and scissors. Diameter. 60mm, max 3000rpm.Comes with replacement paper washers and fitting instructions.

The Multi-Sharp ATT3001 Wetstone Chisel Plane Blade Sharpener has the following features: *WATER-COOLED SHARPENING Water-cooling is acknowledged by professionals to hone the finest edges. The Whetstone uses re-circulating water to eliminate over-heating of the blade edge and loss of steel temper -blueing. Simply fill the built-in reservoir with water, turn on the power drill and a continuous film of water covers the face of the grinding wheel. *WOOD CHISELS / PLANE BLADES Whetstone sharpens even badly damaged chisels / plane blades quickly, because it uses the relatively high power / torque of an electric drill. The chisel clamp accurately holds the blade at the selected angle for a precision ground edge. *Blade capacity: 10-60mm. *Sharpening angles: 25,30,35,40 for primary and secondary bevels, plus firmer, bevel-edge and rebate chisels. *The traditional leather strop removes any burr, for a razor-sharp edge. *SMALL TOOLS The Tool Rest gives a firm base for re-pointing and re-edging a whole range of small tools including cold chisels, bradawls, screwdrivers, centre-punches, scribers, wood carving / turning tools, gouges etc. Marked angles on the rest indicate the tip angle. *Power source: any electric drill.

The Multi-Sharp ATT2003 Silicon Carbide Replacement Grinding Wheel fits the ATT 2001 Multi-Sharp Drill Bit Sharpener.For resharpening masonry and hammer bits, flat wood bits and re-edging small tools. Comes with two replacement nylon bearings and fitting instructions. Specifications: Diameter: 36mm.Max 3000rpm.

The Multi-Sharp ATT2002 Aluminium Oxide Replacement Wheel fits the ATT2001 Multi-Sharp Sharpener.It is used for resharpening wood and metal drill bits.The replacement wheel comes with two replacement nylon bearings, and the fitting instructions. Specifications: Diameter: 36mm.Max 3000rpm.

The Multi-Sharp ATT2001 Dual Purpose Sharpener will accurately sharpen HSS and masonry bits, (including 2 and 4 edged bits and SDS Plus Bits) and Brad centre point bits. The grinding jig accurately positions each type of bit over the wheels (aluminium oxide and silicon carbide), and grinds the correct tip and relief angles. Can be powered by any electric drill. It also re-edges and re-sharpens scribers, bradawls, punches, cold chisels and TCT tile and laminate cutters. Fits any power drill. Drill Bit Capacity: 3-13mm. Long life, high quality Aluminium Oxide and Silicon Carbide wheels sharpen at least 150 HSS/Wood bits and 75 Masonry/SDS bits respectively (based on 6.5mm dia.). Grinding wheels are replaceable. Also re-edges, resharpens small tools: scribers, bradawls, punches, cold chisels, TCT laminate/tile cutters.

These INDMB24 aluminium oxide bench stones have the same grit throughout. Size: 4 x 1 x 1/2 in.Grade: Fine.

These FB24 alumimium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2in.Grade: Fine.

Dekton 8-Piece Assorted Screwdriver Set

Dekton Precision Screwdriver Set - 6Pc

6-In-1 Screwdriver Set With Pozi, Phillips & Flat Bits

Professional quality ratcheting 1/4in driver with a reversible ratchet mechanism and magnetic function for holding the bits and ferrous fastenings in place. The bi-material handle has built in storage for the bits. Supplied with the following:2 x Slotted: 5 and 7mm.2 x Phillips: PH1 and PH2.2 x Pozidriv: PZ1 and PZ2.

The Teng Tools MD910N 10 Piece Screwdriver Set is supplied in a durable plastic case. The screwdrivers have ergonomically designed two component handles with a hanging hole. Comprising of: 4 x Slotted: 3.0 x 100mm, 5.5 x 75mm, 5.5. X 150mm, 6.5 x 150mm. 1 x Insulated: 3.0 x 100mm. 3 x Phillips: PH0 x 75mm, PH1 x 75mm, PH2 x 100mm. 2 x Pozidriv: PZ1 x 75mm, PZ2 x 100mm.

The Stahlwille 18120002 Stubby Ratchet Bit Holder has an ergonomically designed, non-slip 2 component handle for optimum force transmission. The bit holder has a knurled spin section for faster screwdriving and has a heavy-duty ratchet mechanism with 48 teeth (7.5 working angle). The bit holder is suitable for 1/4in hex bits and allows easy bit change, thanks to its internal magnetic hex drive. The direction (clockwise or anticlockwise) can easily be changed by twisting the locking ring.

The Stahlwille 18120001 Ratchet Bit Holder has an ergonomically designed, non-slip 2 component handle for optimum force transmission. The handle features a storage compartment which can hold up to 6 bits. The bit holder has a knurled spin section for faster screwdriving and has a heavy-duty ratchet mechanism with 48 teeth (7.5 working angle). The bit holder is suitable for 1/4in hex bits and allows easy bit change, thanks to its internal magnetic hex drive. The direction (clockwise or anticlockwise) can easily be changed by twisting the locking ring.

The Stanley 4-in-1 Pocket Driver has a non slip textured surface that will not slip, crack or peel. It has a soft bi-material grip for comfort and is made from S2 tool steel for maximum durability. Magnetic bits attract and hold small screws. Contains: 2 x Double Ended Bits: Slotted 3mm (1/8in)/PH1, Slotted 4mm (5/32in)/PH00.

The Stanley 5-98-001 6 piece Cushion Grip Screwdriver set contains the following: 1 x Parallel tip: 6.5 x 150mm.3 x Flared tip: 3 x 75mm, 5 x 100mm and 6.5 x 150mm. 2 x Pozidriv tip: PZ1 x 75mm and PZ2 x 100mm. The screwdrivers have chrome plated bars with magnetic tips and their bi-material handles ensure a comfortable grip.For easy identification, the screwdrivers are icon coded.

The Stanley FatMax Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond - gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Contents: Parallel: 3.0 x 50mm, 4.0 x 100mm, 6.5 x 30mm (stubby).Flared: 5.5 x 100mm, 6.5 x 150mm, 8.0 x 150mm.Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm.

The Stanley 564977 is a 10 piece set of cushion grip screwdrivers. All the screwdrivers are corrosion resistant with high grade chrome plated steel bars for added strength and durability. This reduces the chance of tip breakage giving them a longer operation life, unlike some other screwdrivers in this class. The screwdrivers in this Stanley 564977 screwdriver set have been designed with large diameter soft grip handles with a smooth domed end. The design provides excellent torque and gives you a faster spinning action to complete screwdriving applications quickly and efficiently, with all the comfort you need. Stanley have also introduced to their range of cushion grip screwdrivers, the tip identification mark in the handle for quick and easy visibility. This helps users to match the right screwdriver to the right screw type and helps to avoid damaging the screw ends. The magnetic tips on these Stanley screwdrivers make pick-up and screw location quick and easy. Contents: 5 x Flared: 3.0 x 75mm (Instrument), 5.0 x 100mm, 6.5 x 45mm (Stubby), 6.5 x 150mm, 8.0 x 150mm. 5 x Phillips: PH0 x 60mm (Stubby), PH1 x 75mm, PH2 x 45mm (Stubby), PH2 x 100mm, PH3 x 150mm.

The Stanley FatMax Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Supplied in a handy carry case. Contents: Parallel: 2.5 x 50mm, 3.0 x 100mm, 4.0 x 100mm, 4.0 x 150mm, 5.5 x 150mm, 6.5 x 30mm (stubby). Flared: 4.0 x 100mm, 5.5 x 100mm, 8.0 x 150mm. Phillips: PH00 x 50mm, PH0 x 75mm, PH1 x 30mm, PH1 X 100mm, PH2 x 125mm, PH3 x 150mm. Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 30mm, PZ2 x 125 mm, PZ3 x 150mm.

The Stanley Cushion Grip screwdrivers with a chrome plated bar which is corrosion resistant, and magnetic tips for easy pick up and screw locator. The soft grip handle provides excellent torque and comfort. It has a smooth domed end for fast spinning action, speed and comfort, and the large diameter handle offers greater torque which is needed for driving wood screws. Screw tip identification is shown on the handle. Contents: 5 x Flared: 3.0 x 75mm (Instrument), 5.0 x 100mm, 6.5 x 45mm (Stubby), 6.5 x 150mm and 8.0 x 150mm. 5 x Pozidriv: PZ0 x 60mm, PZ1 x 75mm, PZ2 x 45mm (Stubby), PZ2 x 100mm and PZ3 x 150mm.

44 Piece Stanley Screwdriver Set, contains a selection of useful screwdrivers for everyday use. Fitted with comfortable handles and supplied in a handy storage rack that can stand on a work surface or be screwed into a wall. Contains the following: 6 x Slotted Screwdrivers: 3 x 50mm, 3 x 75mm, 5 x 75mm, 5 x 100mm, 6 x 100mm 6 x 150mm 6 x Phillips Screwdrivers: PH00 x 75mm, PH0 x 75mm, PH1 x 75mm, PH1 x 100mm, PH2 x 100mm PH2 x 150mm 3 x Pozidriv Screwdrivers: PZ0 x 75mm, PZ1x 100mm PZ2 x 100mm 2 x TORX Screwdrivers: TX15 x 100mm TX20 x 100mm 1 x Multi-Bit Screwdriver 4 x 25mm TORX Bits: TX20, TX25, TX30 TX40 6 x 25mm Hex Bits: 2, 2.5, 3, 4, 5 6 16 x Hexagon Keys: Metric 1.5, 2, 2.5, 3, 4, 5, 5.5 6mm; Imperial 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32 1/4in

The Stanley 6 Way Screwdriver has a soft-grip rubber handle with diamond texture for a firm comfortable grip. Built-in bolster for additional turning power and strength. Ideal for car glove box or kitchen drawer. Quality bits give a long life. Comes with the following: 2 x Parallel: 4.5mm, 6mm.2 x Phillips: PH1, PH2.2 x Hex Drive: 6mm, 8mm.

The Stanley 0-68-010 Multibit Ratchet Screwdriver features a patented bit storage system for ease of visibility, access and security. It also has a spring loaded, hard wearing, ball bearing indexing mechanism for quick and easy access. The magnetic bit holder provides a quick, secure changeover of standard 1/4in bits and a top quality patented, 3-position, audible, ratcheting mechanism (forward, reverse and fixed) for life long efficiency. Stanley have used the most up to date materials in their screwdrivers. The tri-lobular, bi-material handle with textured finish will give users maximum torque on any type of screw with the minimum of effort. The screwdriver is supplied in a unique holder which contains 4 bits in addition to the 6 bits held in the screwdrivers' integral storage magazine. In total, it is supplied with 10 bits to suit a variety of purposes. Contains: 3 x 25mm Phillips Bits: PH1, PH2(2). 3 x 25mm Pozidriv Bits: PZ1, PZ2(2). 2 x 25mm Slotted Bits: 3mm, 6mm. 2 x 25mm Torx Bits: TX10, TX15.

The Stanley 0-66-358 Ratchet Stubby Screwdriver comes with 6 x 1/4in hexagonal bits, which are stored in the screwdrivers removable end cap for quick and easy bit changes on different screw types. It has an easy to use ratchet mechanism with screw and unscrew direction twist action handle. The bi-material handle is comfortable to use and provides added torque and easy access to bit storage, while the magnetic bit holder ensures that bits are held securely in when in use. Ideal for all tight or restricted screwdriving applications around the home, office or work site. 2 x Flared: 5mm, 6mm.2 x Phillips: PH1, PH2.2 x Torx: TX15, TX20.

Stubby (non ratchet) interchangeable screwdriver with a selection of popular bit sizes.Bi-material handle provides extra grip.Magnetic bit-retention to prevent lost bits.Secure handle bit holder.Accepts standard 1/4in hex screwdriver bits.

The Stanley FatMax VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life. Tip: Parallel 3 x 65mm.

The screwdrivers in this Stanley Tools 6 piece precision set have a soft cushion grip for comfort. They are supplied in a handy plastic storage case. The set contains the following: 2 x Phillips: PH0 and PH1.4 x Slotted: 1.4, 2.0, 2.4 and 3.0mm.

The Stanley FatMax Precision Screwdriver Set with handles that are moulded to the bar giving a virtually unbreakable bond and ensuring long life and high torque. The chrome vanadium steel bar improves torque and reduces the chance of tip breakage. A soft grip bi-material handle aids comfort and reduces fatigue. Contains: 1 x Pozidriv: PZ0x75mm.3 x Parallel: 2.5x50mm, 3x50mm, 3x100mm.2 x Phillips: PH00x50mm, PH0x75mm.

This Stanley Fatmax Bit Adaptor is constructed from heavy-duty carbon silicon steel for added strength, performance, and longer product life. It has a large soft-grip, tri-material ergonomic handle designed to reduce fatigue and increase comfort in repetitive applications.Its narrow waist and smooth, domed end deliver excellent torque, speed, control and ease-of-use in challenging fastening or loosening applications, ideal for driving wood screws. Tethering hole integrated into the handle, ensuring tools are never mislaid or dropped, and delivering additional safety for users when working at heights. Specification: Length: 125mm.

Type - Flared Tip Size 5.5mmBlade Length 150mm (6 in)

Type - Flared Tip Size 5.5mmBlade Length 125mm (5 in)