1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 38mm (1.1/2in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 32mm (1.1/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 25mm (1in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 22mm (7/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 20mm (3/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 18mm (3/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 16mm (5/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 12mm (1/2in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 10mm (3/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 8mm (5/16in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 6mm (1/4in)

The Stanley STA 0-16-267 FatMax Thru Tang Chisel is 50mm (2in) in width and 165mm in length

The Stanley STA 0-16-266 FatMax Thru Tang Chisel is 40mm (1.5/8in) in width and 165mm in length.

The Stanley STA 0-16-265 FatMax Thru Tang Chisel is 38mm (1.1/2in) in width and 165mm in length

The Stanley STA 0-16-264 FatMax Thru Tang Chisel is 35mm (1.3/8in) in width and 155mm in length.

The Stanley STA 0-16-263 FatMax Thru Tang Chisel is 32mm (1.1/4in) in width and 155mm in length

The Stanley STA 0-16-262 FatMax Thru Tang Chisel is 30mm (1.1/8in) in width and 155mm in length

The Stanley STA 0-16-261 FatMax Thru Tang Chisel is 25mm (1in) in width and 155mm in length

The Stanley STA 0-16-260 FatMax Thru Tang Chisel is 22mm (7/8in) in width and 135mm in length

The Stanley STA 0-16-259 FatMax Thru Tang Chisel is 20mm (13/16in) in width and 135mm in length

The Stanley STA 0-16-258 FatMax Thru Tang Chisel is 18mm (11/16in) in width and 135mm in length

The Stanley STA 0-16-257 FatMax Thru Tang Chisel is 16mm (5/8in) in width and 130mm in length

The Stanley STA 0-16-256 FatMax Thru Tang Chisel is 15mm (9/16in) in width and 130mm in length

The Stanley STA 0-16-255 FatMax Thru Tang Chisel is 14mm (17/32in) in width and 125mm in length

The Stanley STA 0-16-254 FatMax Thru Tang Chisel is 12mm (1/2in) in width and 125mm in length

The Stanley STA 0-16-253 FatMax Thru Tang Chisel is 10mm (3/8in) in width and 125mm in length

The Stanley STA 0-16-252 FatMax Thru Tang Chisel is 8mm (5/16in) in width and 125mm in length

The Stanley STA 0-16-251 FatMax Thru Tang Chisel is 6mm (1/4in) in width and 125mm in length

The Stanley FatMax Folding Pocket Chisel is ideal for job site work. The blade is made from hardened and tempered carbon steel for edge retention. It folds within the handle to fit in the pocket, preventing blade damage and trouser cutting. Fitted with a bi-material for comfort. It has a steel strike cap, which is suitable for use with a hammer.

Stanley Bevel Edge Chisel Set designed for tradesmen. Ground finished, hardened and tempered alloy steel blade. The blade is lacquered for rust prevention. Fitted with a solid one-piece, impact-resistant, blue polypropylene handle. Supplied in a carry case with a sharpening stone and oil. Sizes: 6, 12, 18 and 25mm.

1 x Stanley 5002 Bevel Edge Chisel Set, 4 Piece Sizes: 6, 12, 18 and 25mm

Stanley 5002 Bevel Edge Chisel Set, 3 Piece Sizes: 12, 18, 25mm

The Stanley FatMax Side Strike Chisel has a hardened steel strike cap for increased durability and use with steel hammers. The sharpened side edge enables this multi-purpose tool to be used for chopping out, cutting, shaving and shaping. Its carbon steel blade provides a durable cutting edge. Whislt its steel core ensures a longer working life. Fitted with a bi-material handle for increased comfort.

To fit 112020 and 112220 Planes 9. 1/2G and 220G. (old style) Cutter Size. 1.5/8in

To fit 112060 Plane 60. 1/2G.(old style) Size of Cutter 1.3/8in

Blades for replaceable blade planes are produced from fine rolled steel, heat treated and ground to a razor sharp edge ready for use. The straight one for rebating or narrow edges. Suitable for RB10 replaceable blade plane. 112100. Card of 5.

This Stanleyreplacement No.4 Plane Iron is made from chrome carbon steel which has excellent edge retention characteristics and allows a razor-sharp edge to be honed. The cutter is fine rotary ground to give a flat surface that is easier to sharpen. Specification: Fits: 112004, 112005, 112204 and 112205 Planes.Width: 50mm (2in)

This Stanley single pinion hand drill had a 3-jaw chuck for greater versatility. It has an aluminium gear wheel which is long lasting, strong, and lightweight. It has a mandrel with three 8mm diameter bits. Made of precision die cast for strength and durability.Length: 265mm

Stanley spares kit 2 fits product numbers 12-045, 005, 055, 006, 007, 145, 015, 155, 016, 011 and 017 plus 12-905 and 906. Contents: 1 x 12216C Handle. 1 x 33001C Handle Rod (metric). 1 x 83258C Handle Rod (imperial). 1 x 12192C Knob. 1 x 32988C Knob Rod (metric). 1 x 83271C Knob Rod (imperial). 2 x 36122C Knob and Handle Nuts (metric). 2 x 34435C Knob and Handle Nuts (imperial). 4 x 26951C Knob and Handle Washers. 1 x 37113C Handle Toe Screw (metric). 1 x 83284C Handle Toe Screw (imperial).

This 5 piece Wood Chisel set contains the following sizes: 6mm (1/4in), 13mm (1/2in), 19mm (3/4in), 25mm (1in), and 32mm (1.1/4in). Supplied in a handy canvas wallet.

Roughneck complete set containing 3 professional quality Bevel Edge Chisels, Dual Grit Stone, Honing Guide and Oil to maintain the optimal performance of chisels. Pro Chisels are manufactured chrome vanadium and heat treated for long life performance. The bevel edge blade has two cutting angles, 25? ground angle and a pre-honed 30? angle for immediate use. Soft grip handles for comfort and control with a heavy-duty end cap for repeated striking. Thru-tang design transfers striking force to the cutting edge for maximum effect and outstanding durability. Set supplied in a plastic storage case. Contains the following sizes: 13mm (1/2in), 19mm (3/4in), and 25mm (1in).

This 4 piece Wood Chisel set contains the following sizes: 6mm, 13mm, 19mm and 25mm.

This set of 3 chisels contains the following sizes: 13mm (1/2in), 19mm (3/4in), and 25mm (1in).

Size: 50mm (2in).

Size: 38mm (1.1/2in).

Size: 32mm (1.1/4in).

Size: 25mm (1in).

Size: 19mm (3/4in).

Size: 16mm (5/8in).

Size: 13mm (1/2in).

Size: 10mm (3/8in).

Size: 6mm (1/4in).

IRWIN Record Jack Economy Plane, with tungsten vanadium cutter is competitively priced and features, screw adjustment for depth of cut and lever for lateral adjustment. Pre-packed on a strong display card with user instructions.

The Record SP4 Economy Smoothing Plane, with tungsten vanadium cutter is competitively priced and features, screw adjustment for depth of cut and lever for lateral adjustment. Pre-packed on a strong display card with user instructions.

IRWIN Record replacement single iron for the 778 Rebate Plane.Size: 38mm (1 1/2 in).

IRWIN Record A151R is for concave surfaces useful shaping tool for curved surfaces.The malleable iron handles are virtually unbreakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge. Specification Type: Round.Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).

IRWIN Record A151 is a useful tool for convex curves. The malleable iron handles are virtually unbreakable and designed for a lifetimes use. The fully adjustable cutter is manufactured from top quality tool steel to create and retain a keen cutting edge. Specification Cutter Width: 60mm (2.3/8in).Length: 250mm (10in).

The IRWIN Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions.The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate.The cast iron body has an accurately ground base.Five thread depth adjusting screws for precision control of shaving thickness. Cutter Width: 38mm (1.1/2 in).Length: 215mm (8.1/2 in).

IRWIN Record 09 1/2 Adjustable Block Plane ideal for end grain and general-purpose finishing. Fully adjustable for depth of cut with a screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarseor fine work and a 21 cutter angle. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6 in).

IRWIN Record 060 1/2 Block Plane is specially made to deal with plastic laminates and other man-made materials besides wood. Cutter set at 12.5 with mouth adjustments for coarse or fine work and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6in).

IRWIN Record Jack Plane is manufactured to uncompromisingly high standards. The planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, cast iron base frog and lever cap, and traditional brass adjusting nut.

IRWIN Record planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, selected hardwood handle and knob, cast iron base frog and lever cap, and traditional brass adjusting nut. Smoothing Planes: The most frequently purchased plane used for final finishing work and ideal for general work.

This Priory 150 Nail Puller is ideal for opening packing cases, timber reclamation, removing floorboards and general carpentry.It will easily remove almost every type of nail even if it is sunk below the surface, use the integral slide hammer to sink the jaws in around the nail. The heat-treated alloy steel jaws act in the same way as a pair of pincers while the long handle gives excellent leverage.Specifications: Length: 485mm (19in).Weight: 1.6kg.

This set of 6 Marples MS500 Series ProTouch™ All-Purpose Chisels contains the following sizes:6, 10, 13, 19, 25 and 32mm (1/4, 3/8, 1/2, 3/4, 1 and 1.1/4 in). Supplied in a wooden box.

This set of 5 Marples MS500 Series ProTouch™ All-Purpose Chisels contains the following sizes:6, 10, 13, 19 and 25mm (1/4, 3/8, 1/2, 3/4 and 1in). Supplied in a handy storage wallet.

This set of 4 Marples MS500 Series ProTouch™ All-Purpose Chisels contains the following sizes:6, 13, 19 and 25mm (1/4, 1/2, 3/4 and 1in)

The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the lastin, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. This set of 3 Marples MS500 Series All-Purpose Chisels comprises sizes: 12, 19, 25mm (1/2, 3/4, and 1in). It also includes a honing guide, sharpening stone and honing oil. Supplied in handy carry case.

This set of 3 Marples MS500 Series ProTouch™ All-Purpose Chisels contains the following sizes:13, 19 and 25mm (1/2, 3/4 and 1in). Supplied in a Storage Pouch.

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 16mm (5/8in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 10mm (3/8in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 19mm (3/4in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 50mm (2in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 6mm (1/4in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 13mm (1/2in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 32mm (1.1/4in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 38mm (1.1/2in)

1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 25mm (1in)

This IRWIN Marples M750 Splitproof Pro Bevel Edge Chisel Set is supplied in a wooden presentation box. Contains the following sizes: 6, 10, 13, 19, 25 and 38mm (1/4, 3/8, 1/2, 3/4, 1 and 1.1/2in).

This IRWIN Marples M750 Splitproof Pro Bevel Edge Chisel Set is supplied in a wallet. Contains the following sizes: 6, 10, 13, 19 and 25mm (1/4, 3/8, 1/2, 3/4 and 1in).

This IRWIN Marples M750 Splitproof Pro Bevel Edge Chisel Set contains the following sizes: 13, 19 and 25mm (1/2in, 3/4 and 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This Set of 6 Marples M444 Series Blue Chip Bevel Edge Chisels includes the following: Sizes: 6, 10, 13, 19, 25 32mm (1/4, 3/8, 1/2, 3/4, 1 1.1/4in). Supplied in a wood presentation box.

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 5 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 10, 12, 18 25mm (1/4, 3/8, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 4 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:6, 12, 18 25mm (1/4, 1/2, 3/4 1in).

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen. This set of 3 Marples M444 Series Blue Chip Bevel Edge Chisels contains sizes:12, 18 25mm (1/2, 3/4 1in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 16mm (5/8in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 10mm (3/8in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 19mm (3/4in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 3mm (1/8in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 6mm (1/4in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 13mm (1/2in).

1 X Marples M444 Series Blue Chip Bevel Edge Chisel 32mm (1 1/4in).

Siz1 X Marples M444 Series Blue Chip Bevel Edge Chisel 38mm (1 1/2in).

This 6 Piece IRWIN Marples M373 Splitproof Bevel Edge Chisel Set is supplied in a wooden presentation box. Contains the following sizes: 6mm (1/4in), 10mm (3/8in), 13mm (1/2in), 19mm (3/4in), 25mm (1in) and 32mm (1.1/4in).

1 X M373 Splitproof Bevel Edge Wood Chisel 16mm (5/8in).

1 X M373 Splitproof Bevel Edge Wood Chisel 10mm (3/8in).

1 X M373 Splitproof Bevel Edge Wood Chisel 18mm (3/4in).

1 X M373 Splitproof Bevel Edge Wood Chisel 3mm (1/8in).

1 X M373 Splitproof Bevel Edge Wood Chisel 6mm (1/4in).

1 X M373 Splitproof Bevel Edge Wood Chisel 13mm (1/2in)

1 x IRWIN Marples M373 Bevel Edge Chisel Splitproof Handle 32mm (1.1/4in)