Main features:
• Worktop (2,100x750 mm) made from stainless steel coated MDF, 38 mm thick
• Steel frame with 4 supporting legs
• Holes for a vice (1599F/150 - 1599GI/150, to be ordered separately)
• Lower half-shelf for objects, 1,788x335 mm; thickness: 40 mm
• Can be fixed to floor
• Static load capacity: 1,000 kg, evenly distributed

Following accessories can be added:
• Perforated side panel C58PFL
• Anti-fall edge, 2,100 mm, C58BAC 2.1


 93 kg
2.100x750x904 mm

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1

Features:
• Phosphated square drive
• 48-tooth mechanism
• Take-up angle: 7.5°
• One-handed reversal
• Pressing on head with one’s hand does not cause reversal and always allows free lever return
• Bi-material ergonomic handle, with convenient hanging hole
• Excellent mechanical characteristics

Features:
● Ultra-strength instant adhesion
● High mechanical resistance, final force and elastic module
● Free from isocyanates, phthalates, solvents and silicone
● Permanently elastic, does not shrink, bubble-free, odourless
● Resistant to humidity and weathering
● Adheres primer-free to most substrates, including wet ones


DIRECTION FOR USE
Apply the adhesive in vertical strips 10-20 cm apart. Bring the materials into position and press hard, so that the adhesive can be at least 2-3 mm thick. Do not apply the adhesive in dots.
Application temperature: +5 °C ÷ +40 °C (for both substrates and the environment). Extrude by means of a bonding gun and the ‘V’ nozzle supplied with the adhesive. The substrates must be solid and free from grease and dust. Test before application.

The adjustable wrench with scale, 111E, allows differently sized nuts and bolts to be tightened and loosened through the sliding jaw, which can be adjusted through the central roll.

Features:
• Right-hand rotation
• Wide wrench opening
• Compact head with completely open jaw
• Double laser marking in mm/inch for accurate adjustments
• Matt chrome-plated heads for improved scale readout
• Matt chrome-plated body
• Made from high-performance alloy steel, for increased mechanical torsional strength
• Special heat treatment for excellent wear resistance
• Large handle for optimized comfort during use
• Hole on handle for hanging wrench
• Complies with DIN 3117 - ISO 6787

Offset key wrenches with screw holding system.

Complete with wallet-opening support for quickly identifying required size and preventing wrenches from coming out accidentally.

Kit contents:
• 1 pointed chisel
• 1 narrow flat chisel, 20 mm
• 1 wide flat chisel, 40 mm

Set of 7 machine taps M3÷M12, made from HSS with 5% cobalt, for through holes. The addition of cobalt increases heat resistance and duration, thus making these taps ideal for particularly hard materials and high-speed work.

• Ø 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 mm

A must-have for optimizing and efficiently managing products and tools in warehouses, workshops, offices and sales points.
Made from sturdy sheet steel, it is ideal for accommodating several different types of goods.

• Carrying capacity of each shelf: 250 kg
• Total carrying capacity: 1,000 kg
• Can be fixed to floor


 82 kg

Main features:
• Worktop (2,100x750 mm) made from multi-ply wood, 38 mm thick
• 4 drawers (367x588 mm) with ball bearing slides:
2 drawers 70 mm high
2 drawers 140 mm high.
• Drawer bases protected by foamed rubber mats
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
• Front centralized lock
• 1 module with door and lock
• Steel frame with 2 supporting legs
• Holes for a vice (1599F/150 - 1599GI/150, to be ordered separately)
• 2 lower half-shelves for objects, 1,788x335 mm; thickness: 40 mm
• Static load capacity: 800 kg, evenly distributed
• Can be fixed to floor

Kit with 4 perforated tool panels, comprising the following:
• 3 supporting brackets
• 6 400-mm uprights
• 2 1,015-mm supports; can accommodate 1 19" rack multi-socket (not included)
• 4 perforated tool panels, 1,015x25x400 mm


 161 kg
2.100x750x904 mm

Main features:
• 1 fully removable drawer (1,176x367 mm), with ball bearing slides
• 7 fully removable drawers (882x367 mm), with ball bearing slides:
6 drawers 70 mm high
1 drawer 140 mm high

• Worktop made from stainless steel coated MDF, with holes for vice item 1599F/125 or 1599GI/125 (to be ordered separately) and 6 tote trays
• Sturdy nylon fronts, with built-in label holders
• Drawer bases protected by foamed rubber mats
• Removable side compartment, with ball bearing slides, with shelf and lock
• 4 castors, Ø 150 mm: 2 fixed and 2 steering with brakes
• 3 safety locks
• Built-in paper roll holder
• Built-in bottle holder
• Static load capacity: 1,100 kg

Following trays can be added:
up to 8 EVA foam or ABS thermoformed trays in drawer 1,176x367 mm
up to 6 EVA foam or ABS thermoformed trays in drawer 882x367 mm


Following accessories can be added:
• Perforated tool panel with supports 2400 RSC24AXXL/PF
• Computer wall bracket 2400 RSC24/SPC
• Side tool tray 2400 RSC24AXLP/VL
• Waste bin 2400 RSC24AXLP/CPR
• Folding side shelf 2400 RSC24/MP
 131 kg

The bag includes 2 ratchet-downs with single hooks, high-tenacity polyester belt (PES), 50 mm, 8.5 m long.

Features:
• Professional model, complies with EN13157 standard, made from first-rate materials
• Designed to lift heavy loads quickly and safely
• Can be connected to a fixed point or mobile devices
• Automatic brake with double pawl system
• Self-locking hook
• Safety factor: 4
• WLL: working load limit


Technical data:
• Safety factor: 4
• Serial identification tag

Available certificates:
• Manufacturer's Certificate
• CE Declaration of Conformity
• Test Report UNI EN10204 type 2.2
• Technical Product Specifications

Combination comprising the following:
• 1 worktop (2,240x700 mm) made from stainless steel coated MDF (RSC50 2.0 PX/3-2.2MT)
• 1 fixed module with 7 drawers (RSC50 2.0 M7)
• 1 mobile roller cab with 7 drawers (RSC50 2.0 C7)
• 1 fixed service module with 2 drawers (RSC50 2.0 MS-2C)
• 3 wall-mounted cabinets (RSC50 2.0 PM)
• 3 upper perforated tool panels (RSC50 2.0 PFS)
• 3 lower perforated tool panels (RSC50 2.0 PFI)
• 3 pairs of right/left uprights (RSC50 2.0 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 2.0 A2)

 405 kg

Workshop equipment combination C45PRO 2.0
Combination comprising the following:
• 1 stainless steel coated MDF worktop, dimensions 2,040x615 mm (C45PRO 2.0 PXE/3-2.0MT)
• 1 fixed module with 2 built-in reels (C45PRO 2.0 ACT)
• 1 mobile roller cab with 7 drawers (C45PRO 2.0 C7)
• 1 fixed module with 4 drawers (C45PRO 2.0 M4)
• 3 wall-mounted cabinets (C45PRO 2.0 PM)
• 3 perforated tool panels (C45PRO 2.0 PF)
• 3 wall brackets, wide type (C45PRO 2.0 SL)
• 1 wall bracket, narrow type (C45PRO 2.0 SS)
• 1 two-door cabinet (C45PRO 2.0 AS2)

Features:
• V-profiled base
• Precision: 0.5 mm/m
• Complete with vertical reading window

Kit contents:
• 24 TPI metal blade
• 6 TPI plasterboard blade
• double 11 TPI plastic and 16 TPI wood blade

Features:
• Dual light emission: main and spot
• 3 light intensities:
main COB LED 350 - 175 lumens
spot: SMD LED 120 lumens
• Rechargeable battery: Li-Ion3.7 V, 1600 mAh
• Charging time: 2.5h
• Battery life:
main: 6/3h
spot: 6h
• Magnetic base
• Belt clip/magnetic pocket
• IP65
• IK07
• USB-C cable included

The smallest torque wrench of Beta's range: compact and easy to use, it provides an ideal combination of convenience and simplicity within reach.
Based on its compactness and capacity (3-15 Nm), this torque wrench is ideal for low-torque use (e.g. in the cycling industry).
Lightweight, compact and pocket-sized: the ideal tool for everyday use.

Features:
• Accuracy: ± 4%, right-hand
• Reversible ratchet, 72 teeth
• Right-hand tightening
• 1/4'' square drive
• Unit of measurement: Nm
• Compact: no more than 17.5 cm

The 599DGT-AW digital torque wrench is ideal for precision work in industry and mechanics, where it is essential to track tightening values.

Features:
• Tightening types: torque, angle, torque + angle
• Dual measurement mode: peak hold and track
• Light indicators, an intermittent sound and tactile feedback inform user that preset torque or angle has been reached
• Last 999 peak torque and/or angle readings can be stored and displayed
• 9 “Preset” modes can be saved and preset
• Bi-directional wireless data transmission, from wrench to software and vice versa, in mass or in real time
• Key safety lockout
• Wrench can be associated with a certain user via software
• Tightening data traceability. Software allows date and time, tool serial number, set tightening value and reached value to be stored and associated with user ID
• Customized data processing software with immediate, easy-to-read OK/NG result and real time display of charts
• Nonslip bi-material handle
• Wrench + software in 9 languages
• Included: 3 AA - 1.5V batteries, wireless USB key and software USB key

Beta's adjustable creeper seat 2251N makes it easier to perform lengthy work tasks at different heights.
The three tote-trays and the three drawers allow you to have everything within reach, for improved functionality and efficiency.


Features:
• Vertically adjustable seat (445 ÷ 580 mm)
• Square tool chest (380 mm) with 2 drawers (2+1)
• Drawer dimensions: 350x180x90 mm
• Tote-tray dimensions: 2X 190x190mm - 1X 380x190mm
• 4 pivoting castors, Ø 75 mm
 11 Kg

The tool for manually pushing back brake pistons, fitted with two swivel plates and a ratchet movement mechanism, means an effective, flexible solution for quick jobs - e.g. on commercial vehicles.


 819 g

The unique shape of the multi-head jaws of these pliers make it possible to use the tool on a wide range of commercially available collars. A self-locking rack and a cord extension make it easier to work with one hand - e.g. in narrow or hardly accessible spaces.

Combination comprising:
• 1 1.495-mm-long worktop (RSC50 PG/2-1,5MT)
• 1 fixed module with 5 drawers (RSC50 M5)
• 1 fixed two-door module (RSC50 MA)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 single-door tool cabinet (RSC50 A1)


 230 kg

Combination comprising:
• 1 1.495-mm-long worktop (RSC50 PG/2-1,5MT)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module with 2 drawers (RSC50 MS-2C)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)


 192 kg

Combination comprising:
• 1 stainless steel coated MDF worktop (C45PX/3-2.0MT)
• 1 stainless steel coated MDF worktop (C45PX/1-0.7MT)
• 1 fixed module with 2 built-in reels (C45PRO ACT)
• 1 mobile roller cab with 7 drawers (C45PRO C7)
• 1 fixed module with 7 drawers (C45PRO M7)
• Fixed two-door module (C45PRO MA)
• 1 self-supporting complete corner with stainless steel coated MDF worktop (C45PRO CORNER/X)
• 1 perforated tool panel (C45PRO PF)
• 1 perforated tool panel, con be fitted with a power socket (not included) (C45PRO PFE)
• 2 wall-mounted cabinets (C45PRO PM)
• 1 tool wall system with aluminium shutter (C45PRO PAS)
• 5 wall brackets, wide type (C45PRO SL)
• 4 wall brackets, narrow type (C45PRO SS)
• 2 single-door cabinets (C45PRO AS1)


 507 kg

Combination comprising:
• 1 multi-ply wood worktop (C45PW/3-2.0MT)
• 1 fixed module with 2 built-in reels (C45PRO ACT)
• 1 mobile roller cab with 7 drawers (C45PRO C7)
• 1 fixed module with 4 drawers (C45PRO M4)
• 3 wall-mounted cabinets (C45PRO PM)
• 3 perforated tool panels (C45PRO PF)
• 3 wall brackets, wide type (C45PRO SL)
• 1 wall bracket, narrow type (C45PRO SS)
• 1 two-door cabinet (C45PRO AS2)

019380055 1938R/S5 1938 R/S5-sets 5 blades for 1938
Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55C7
Mobile roller cab with seven drawers
(588x367 mm), with ball bearing slides
• 4 castors, Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with thermoformed trays


C55PM + C55PT1,0x0,6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)


 467 kg

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oil and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55M4
Fixed module with four drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55PM + C55PT1,0x0.6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)

C55A2
• 1 two-door tool cabinet


 535 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55C7
Mobile roller cab with seven drawers (588x367 mm) with ball bearing slides
• 4 castors Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55PS
Tool wall system with shutter and framework
• Aluminium shutter, vertically adjustable, with lock
• Removable perforated tool panel


 347 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers (588x367 mm) with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55/2PM + C55/PF
Tool wall system with 2 suspended cabinets
• 2 suspended cabinets, 1024x400x300 mm, with gas springs
• 2 under-cabinet panels, 1024x620x25mm
• 2 under-cabinet perforated tool panels, 1024x620x25 mm


 350 kg

Combination comprising:
- Two-door tool cabinet (C55A2)
- Workbench (C55BO/2)
- Fixed module with 7 drawers (C55M7)
- Fixed service module (C55MS)
- Tool panel with suspended cabinets (C55/2PM)

Combination comprising:
- Workbench (C55BO/2)
- Roller cab module with 8 drawers (C55C8)
- Fixed module with 2 storage drawers (C55M2)
- Wall tool system with shutter (C55PS-O)

 334 kg
2.05x2.00x0.76 m

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

61 bits and 1 quick-release magnetic bit holder (items 861LP, 861PE, 861PH, 861PZ, 861TX, 861RTX, 861TRW, 861TQS, 861SP, 851SR)

New bit holder with articulated T handle

 420x185x60 mm –  3 kg

335x145x60 mm –  1,7 kg

52 hexagon bits, 10 mm, and 2 accessories
(items 867PE, 867PE/L, 867XZN, 867XZN/L, 867TX, 867TX/L, 867RTX, 867RTX/L, 867/1, 867/1)

Automatic blade loading Automatic blade loading

• Nonslip bi-material handle
• Automatic blade loading
• Blade locking nut for maximum blade stability under stress conditions
• Nonreturn safety slider
• Automatic blade loading

Features:
• Automatic blade change
• Screw blade locking system

• Interior blade storage
• Belt clip
• Sturdy aluminium frame

Features:
● With clip and fabric wallet with loop
● Anodized aluminium handle
● Safety blade lock

320x250x50 mm

– 2 TORX T40-T45 bits
– 1 XZN 10 bit
– 1 hexagon bit, 8 mm
– 3 bi-hex bits, 10-12-13 mm

Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.

Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 1 shelf with adjustable position, 1 fixed shelf and door
• 4 useful side cable reels made of plastic
• 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with frame)
• Weight: 36.5 kg

Ideal for jobs in small areas

– Ultracompact, no more than 176 mm in length; ultralightweight, no more than 1.1 kg, with battery, perfectly balanced
– Double mechanical speed with steel gears and 18-position clutch
– Torque up to 34 Nm and 1500 rpm (350 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
– 2Ah batteries and charge indicator on drill body
– Triple battery self-protection (heat, overload and monitoring of charge differences (if any) between cells) for increased safety and durable high performance
– Ergonomic nonslip handle
– Front LED
– 10-mm autochuck
– Belt clip (right/left side)
– Selector switch, screwing-unscrewing-locking modes (for transportation)
– Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (45 min)

Mechanical and hydraulic operation

Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
 530x470x140 mm –
2,0 kg

• Mechanical and hydraulic operation
• Includes one 12-t hydraulic jack
• Can be directly used on vehicle with mounted engine
• Numerous adjustment options on head make it possible to work on most engines available

• Sturdy and handy
• Autochuck
• Reversible lever
• Slip-proof handle
• Exhaust through handle

• “Pin Clutch” impulse device
• Lightweight and powerful
• Three power adjustable positions
• Exhaust through handle
• Balancing hook
• “Pin Clutch” impulse device

Set of 6 pin punches with handles
2-3-4-5-6-8 mm

Highly lubricating and protective.
Suitable for milling, boring, threading, drilling and manual and automatic machine working.
Highly resistant to oxidation.
Water washable. Solvent-free.


OPERATING INSTRUCTIONS: Shake before use. Water washable.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Silicone lubricant and detacher.

Features:
• Suitable for lubricating plastic, rubber and metal parts. Protects from corrosion
• Detaching, antiadhesive for plastic and rubber moulding. Antistatic, for worktops
• Waterproof, protects from humidity and weather corrosion
• Protective, for electric circuits. Can be used to polish wood, plastics and rubber
• Solvent-free


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Mineral grease mixed with copper.
Suitable for lubricating joints, bolts, gears, driveshafts and other metal parts subject to high temperatures (up to 1,000 °C).
Ideal for preventing seizure and making it easy to unlock threads and parts in general.
Protective, anti-wear. Prevents oxidation. Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Lubricating grease mixed with PTFE.
Particularly useful for lubricating industrial chains and mechanical movements subject to heavy stress and low rotation speeds.
Also suitable for hinges, locks, drawer slides, gates and applications on plastics and rubber.
Totally colourless. Waterproof and resistant to oxidation.
Highly resistant to cold and heat (-30 °C to +220 °C).


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Based on grease with lithium, titanium and zinc oxide soaps. Ideal for lubricating gears, bearings and joints.
Specific for marine applications.
Highly resistant to water, sea salt, weather and high temperatures.
Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 25 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Features:
• Particularly useful for lubricating chains, gears and moving metal parts as well as hinges, locks and pivots
• Resistant to friction and weather
• Highly resistant to high temperatures (up to 210 °C)
• Highly adhesive. Does not drip


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 15 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Unlocking lubricant, super-penetrating
Unlocking, deoxidizing, highly penetrating, for quick rust and oxidation removal from nuts, bolts, screws and gears.
Waterproof, for water and humidity removal from treated parts.
Highly resistant to cold and heat (-40 °C ÷ +150 °C).


DIRECTION FOR USE: Apply product and wait a few minutes.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

7-in-1 multipurpose unlocking lubricant
Adjustable Straw.
7 in 1.
1. Unlocking: dissolves rust from nuts, bolts and gears in general.
2. Lubricating: suitable for all mechanical parts subject to stress.
3. Detergent, degreasing: removes grease and oil from metal surfaces.
4. Rust protective: forms a film protecting against corrosion from weather.
5. Deoxidizing, for electrical contacts: reactivates contacts and prevents short circuits.
6. Waterproof: removes water and humidity from all surfaces.
7. Antifreezing: highly resistant to low temperatures (up to -40 °C).
Fitted with a special valve allowing supply when spray can is upside down.
Silicone-free.
ADJUSTABLE STRAW allows - through a special modular straw - application on parts which would be difficult to reach with a standard dispenser.


Directions for use:
Apply product and wait a few minutes.
To unlock: use suitable tools.
To degrease: clean with a cloth.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

095260010 9526P

095260005 9526F

Features:
• Overall height: 460 mm
• 3 drawers with ball bearing slides
• Front tote-tray
• Rear tote-tray with partitions
• 4 pivoting castors
• Weight: 10.6 kg
 10,6 kg

New Item
Anti-loosening locking screw,
made of stainless steel
Kevlar®
Fibre optics
• Made of steel specially treated to work on cut-proof materials, including aramidic fibres, e.g. Kevlar®
• Also suitable for fibre optics

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

100% Italian made: unparalleled reliability and sturdiness
for professional uses
Particularly recommended for surface finishing jobs on several materials (metal, plastic, glass, ceramic, wood etc.). The cabin is made from properly reinforced sheet steel which results in unparalleled sturdiness and firmness.
The cabin is equipped with the following:
- loading door with magnet closure
- perforated sheet metal top
- standard connection for vacuum cleaners, ø 36 mm
- protective polycarbonate viewing window, 6 mm
- LED lamp
- pneumatic circuit (compressed air inlet)
- sanding gun with trigger operation


TECHNICAL DATA
Useful dimensions of cabin: 600x520x320 mm
Overall dimensions: 660x530x500 mm
Weight: 38 kg
Worktop: perforated sheet metal
Lighting: LED
Air consumption: 340 l/min at 7 atm
Power supply: 220 V - 50 Hz

Cartridge capacity: 310ml Bag capacity: 310ml Not suitable for use with loose bonds

017720029 1772H 170 18 213,4

for deforming plastics and unlocking metal parts
35 g tank

• three interchangeable nozzles: 550 °C; 1000 °C; 1300 °C
• supplied with a stand in hard case

4 sensors with TRUE COLOR filter.
Solar cell power supply and lithium batteries for outstanding LCD filter life.

Features:
• Viewing area: 98x80 mm
• Darkening shade range: 5÷8.5/ 9-13, internally adjustable
• UV/IR protection: DIN16
• Light to dark time: 1/25000 s
• Dark to light time: 0.1-2.0s
• Adjustable darkening sensitivity and delay
• Auto on/off
• Grinding feature
• Low battery indicator
• Ergonomic design, lightweight, well-balanced
• With adjustable ring nut

Features:
● Viewing area: 92x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/1000 s
● Dark to light time: 0.1-1.0 s
● Adjustable darkening delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

DEWALT DCS565N-XJ 18V XR 165mm Circular Saw, Bare Unit

Variable adjustment of the bevel angle to 50 degrees
Model number; dEWDCS565N
Dust blower and LED work light ensure cutline visibility
Include brushless motor for extended run-time, reliability and durability
Durable tool design including a cast aluminum base for accurate cuts

Product Overview
Ready to take on a variety of your cutting applications. The DCS565 18V XR 165mm Circular Saw combines performance and versatility and features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provides a max depth of cut of 55mm at 90° along with a max bevel of 50°.



Additional Features
DEWALT Brushless Motor for extended run-time, reliability & durability
Extremely durable tool design, including a cast aluminum base for repetitive, accurate cuts
Variable adjustment of the bevel angle to 50 degrees
Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
Optimum balance for safe, fatigue-free operation
Lock off switch and electronic motor brake for additional control and work safety
Additional handle for safe two-handed work
Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose
Convenient storage on the jobsite with the built-in rafter hook
Dust blower clears dust and debris from cut line

DEWALT DCS355N-XJ Oscillating Multi-Tool 18V Li-Ion Cordless Brushless Battery Powered

Compact 300W motor delivers 0-22,000 oscillations per minute, providing faster completion of the most demanding tasks
Variable speed control and dual grip position allows for a simple soft start function and better application control
Quick-fit depth stop for ultimate control over application
Unique quick change accessory system allows for blades and attachments to be easily changed without the use of tools
Part of the DEWALT's biggest and fastest growing system - XR, compatible with all 18V XR batteries. DEWALT 18V XR Lithium-Ion Battery sold separately.

Product Overview
The DCS355 18V XR Oscillating Multi-Tool has a powerful brushless motor providing up to 57% more run time over a similar brushed tool. The Quick-Change accessory system allows you to change blades quickly and easily, and with the universal accessory adaptor, it's compatible with most oscillating tool accessories. The Variable Speed Trigger provides ultimate speed and application control, the DEWALT Oscillating Tool Guide System allows you to customize the depth or height for accurate repeatability, and the bright LED light illuminates dark work spaces. Bare unit, batteries and charger sold separately.



Additional Features
Bright LED light illuminates dark work surfaces for accurate cutting
DUAL-GRIP Variable Speed Trigger provides the ultimate speed and application control
QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without the use of tools
Universal Accessory Adaptor for use with most oscillating tool accessory brands
29 pc Accessory Set to support a range of cutting and sanding applications
DEWALT Brushless Motor delivers up to 57% more run time over brushed motors

• Sheet metal frames and plastic tops
• 3 detachable modules:
1 upper tool box, 220 mm high 1 central module, 165 mm
high,with 2 drawers, 60 mm high 1 lower module, 330 mm
high, with up-and-over door, 280 mm high, with castors
• Castors ø 128 mm
• Telescopic handle, can be adjusted in 4 positions
• Module release system with access to all tool compartments
• Upper tool box with removable interior
object compartment and 2 tote-trays built into cover

BW 42 Combination wrenches 8-10-11-12-13-14-15-17-19 mm 9
BW 1150BM 180 Heavy-duty combination pliers  180 mm 1
BW 1082BM 160 Diagonal cutting nippers  160 mm 1
BW 1770RL 9-mm snap-off spare blades, 10 pieces,
for utility knives BW 1770, BW 1770A and BW 1770BM 10x 10

Features:
• Maximum capacity: 10 t
• Manual 2-speed pump
• Moving piston
• Automatic piston return
• Set of V-shaped prisms included
• Chrome-plated stand

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Feeler gauges for car body repair shops, pair, 10-bladed, with suction cup
Suitable for:
• fitting rear windows
• maintaining position during installation


 50 g

Product Name
Art.
Quantity per Wishlist
Product Name
Art.
Quantity per Wishlist
012031001 1203E/D5
Set of 5 Evox screwdrivers items 1201E, 1202E
1
012031003 1203E/D5PZ
Set of 5 Evox screwdrivers items 1201E, 1209E/PZ
1
012031006 1203E/D6
Set of 6 Evox screwdrivers items 1202E, 1204E
1
012031007 1203E/D7
Set of 7 Evox screwdrivers items 1201E, 1202E
1
012031008 1203E/D8
Set of 8 Evox screwdrivers items 1201E, 1202E
1
012031018 1203E/D8P
Set of 8 Evox screwdrivers
1
012031010 1203E/D10
Set of 10 Evox screwdrivers items 1201E, 1202E
1
012031019 1203E/D10N
Set of 10 Evox screwdrivers items 1201E, 1202E

Plastic barrier chain

Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

C25
Tank trolley with shelf
Main features:
• Foldaway lid.
• 1 sliding drawer.
• Tool tray protected by foamed rubber mats.
• Shelves protected by oil and fuel proof mats.
• Four castors 100 mm in ø:
2 fixed and 2 swivelling (one with brake).
• Safety lock.
• One more shelf M4 can be added on the opposite side.
• Empty thermoformed tray for 1/2" sockets and accessories (024990104).
• Paper roll holder item 2499PC
can also be included


 31,5 kg

1752
Plastic pressure cans, rigid spouts
For use with oil with density ranging from ISO22 to ISO68

123E1/4
Bit holder adaptor, 1/4", for 10 mm ratcheting wrenches
• Used in combination with 10-mm ratcheting wrench, it allows quick use of bit.

1473P
Clamp pliers for OETIKER® low-profile collars

T145
Hard thermoformed tray with tool assortment

 640 g

 1032 circlip pliers straight, internal  180 mm
 1034 circlip pliers bent, internal  170 mm
 1036 circlip pliers straight, external  175 mm
 1038 circlip pliers bent, external  175 mm

Product Name Art.
024240145 T145
hard thermoformed tray with tool assortment
1
024000448 TV145
thermoformed tray T145, empty
1

Product Name Art.
014300105 1430/S5
set of 5 tapered extractors for broken screws and studs, made from hardened steel (item 1430/..), in case
1430/1-1430/2-1430/3
1430/4-1430/5

Double ended hexagon / bi-hex socket wrenches, chrome-plated
• Can be used with sliding handle in through hole.
• Hole on short side allows access to nut, e.g. with projecting threads.