The Trend C153D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling and has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50mm (2in)Overall Length: 93.5mmShank Diameter: 1/2in

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core worktops. With a bottom cut feature for plunge cut, slotting and morticing applications. The two flutes have highly ground tip faces, for a superior cutting performance and chip clearance. Its PTFE coated body reduces friction, heat and resin build-up for a longer lifespan. Specification: Diameter: 12.7mmCutting Depth: 50mmShank: 1/2in

The Trend C153 x 1/2 TCT Two Flute Workshop Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50mm (2in)Overall Length: 93.5mmShank Diameter: 1/2in

Shank = 1/4in

Shank = 1/2in

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm. Specification: Shank Diameter: 1/4 in.

This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification: Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in

This Trend C130 x 1/4 TCT Bearing Guided Corner Bead has the following specification: Cutting Diameter: 26mm (1.1/32in)Cutting Depth: 16mm (5/8in)Bearing: 15.9mmRadius: 4.8mmOverall Length: 70.5mmShank Diameter: 1/4in

This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 9.5mmShank: 1/4in

This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 25.4mmShank: 1/4in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/4in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/2in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 9.5mmCutting Depth: 12.7mmShank: 1/4in

The Trend C078 x 1/4 TC Round Over Two Flute Cutter will cut full bullnose profile for detailing work on 19mm stock. Specification: Cutting Diameter: 31.7mmCutting Depth: 15.9mm (5/8in)Bearing; 1: 9.5mm, 2: 12.7mmRadius: 9.5mmOverall Length: 67.5mmShank Diameter: 1/4in

This Trend C076 x 1/4 TCT Bearing Guided Ovolo Round Over has the following specification: Cutting Diameter: 25.4mm (1in)Cutting Depth: 12.7mm (1/2in) Bearing; 1: 9.5mm, 2: 12.7mmRadius: 6.3mm (1/4in)Overall Length: 64mmShank Diameter: 1/4in

The Trend C074 x 1/4 TC Round Over Two Flute Cutter with a 1/8in imperial radius for matched replication. Specification: Cutting Diameter: 19.0mmCutting Depth: 9.5mm (3/8in)Bearing; 1: 9.5mm, 2: 12.7mmRadius: 3.2mm (1/8in)Overall Length: 61mmShank Diameter: 1/4in

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices. Ideal for classic decorative mouldings and edge details. Specification: Radius: 9.5mmCutting Depth: 12.7mmShank: 1/2in

The Trend CraftPro Bearing Guided Chamfer Cutter for edging and chamfer cutting, on man-made fibreboards, natural timbers and plastics. It has two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Follows straight and curved profiles for crisp, professional detailing work on an edge. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers, 'K' marked to ensure safe working practices. Specification: Cutting Diameter: 32mmCutting Depth: 12.7mm (1/2in)Angle: 45Bearing: 9.5mmOverall Length: 62mmShank Diameter: 1/4in

The Trend CraftPro Chamfer V-Groove Cutter has two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Its 45 'V' groove profile is ideal for false panel work and match board grooving details. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. Fitted with a 1/4in 'K'mark shank to ensure safe working practises. Can be used for mitred corner details on thin stock up to 9mm. Additional 90 profile allows quirked shoulder feature for extra diversity. Specification: Diameter: 12.7mmCutting length: 6.0mmAngle: 45Shank: 1/4in

The Trend C041A x 1/4 TCT Dovetail has the following specification: Cutter Angle: 104Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 12.7mm (1/2in)Overall Length: 60.5mmShank Diameter: 1/4in

This Trend Craft Pro 1/4in shank Bearing Guided Rebater, router cutter, has a 35mm diameter and two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.It has a bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease.This cutter is supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. The 1/4in shank gives easy control in smaller routers with 'K' mark shank to ensure safe working practices.Specifications: Diameter: 35.0mm.Cutting Length: 12.7mm.Rebate: 11.1mm.Bearing: 12.7mm.Shank: 1/4in.

The Trend C030 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 19.1mm (3/4in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4in

The Trend C024 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 15mm (19/32in)Cutting Depth: 25mm (63/64in)Overall Length: 65.5mmShank Diameter: 1/4in

The Trend C022 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 31.8mm (1.1/4in)Overall Length: 72.5mmShank Diameter: 1/4in

The Trend C019A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19mm (3/4in)Overall Length: 71mmShank Diameter: 1/4in

The Trend C019 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19.1mm (3/4in)Overall Length: 60mmShank Diameter: 1/4in

The Trend C016 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 10mm (25/64in)Cutting Depth: 19.1mm (3/4in)Overall Length: 59.5mmShank Diameter: 1/4in

The Trend C015 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 31.8mm (1.1/4in) Overall Length: 72.5mmShank Diameter: 1/4in

The Trend C014 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4in

The Trend C013 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 19.1mm (3/4in)Shank Diameter: 1/4in

The Trend C012A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 8mmCutting Depth: 25mmOverall Length: 68.5mmShank Diameter: 1/4in

The Trend C008 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 6.3mm (1/4in)Cutting Depth: 25.4mm (1in)Overall Length: 68.5mmShank Diameter: 1/4in

The Trend C007 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 6.3mm (1/4in)Cutting Depth: 19.1mm (3/4in)Overall Length: 62.5mmShank Diameter: 1/4in

The Trend C005 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 6mm (15/64in)Cutting Depth: 16mm (5/8in)Overall Length: 60mmShank Diameter: 1/4in

The Trend C002 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 4mm (5/32in)Cutting Depth: 11.1mm (7/16in)Overall Length: 60mmShank Diameter: 1/4in

The Trend C001 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 3.2mm (1/8in)Cutting Depth: 9.5mm (3/8in)Overall Length: 60mmShank Diameter: 1/4in

Outside Diameter:- 3/4inInside Diameter:- 1/4inThickness:- 9/32in

Outside Diameter:- 5/8inInside Diameter:- 1/4inThickness:- 11/64in

Outside Diameter:- 1/2inInside Diameter:- 1/4inThickness:- 3/16in

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or external corner.The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools. This anglefix is ideal for setting mitre angles for skirting, architrave, dado rails, picture frames, moulding and more. It makes setting angles simplified, speeding up mitre work for trade and hobbyists alike.

Tooling T.C.T.1/2in Shank.R = 7 mmD = 31.9 mmd = 28.6 mmB = 16 mm

Tooling T.C.T.1/4in Shank. R = 4.8 mmD = 28 mmd = 25.7 mmB = 16 mm

Tooling T.C.T.1/4in Shank.R = 3.2 mmD = 22 mmd = 18.9 mmB = 12.7 mm

The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm.

Tooling :TC1/4in Shank. D =26 mmC =14.3 mmR =5/16 inchR = 8.0 mmP =9mm

Tooling :TC1/4in Shank. D =22 mmC =12.6 mmR =1/4 inchR =6.3 mmP =9 mm

Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters. Specifications: Tooling: T.C1/4in Shank.D =3/8 inch.D =9.5 mm.D2=3.2 mm.C =9 mm.R =2.5 mm.

The TRE63127 Collet Sleeve has the following specifications: Diameter: 12.7mm (1/2in)Internal Bore 6.35mm (1/4in)Bore: 8mm.Overall length: 30mm.

These combination tools in TCT can be used in abrasive materials.They will drill, countersink and finally counterbore a parallel hole.Designed to receive plug maker group 24.The drill diameter sizes are for a clearance hole only.For use with drilling machines or routers. Specifications: T.C.T.1/4in Shank.Woodscrew Size. No.10.Drill Diameter 7/32in.Countersink Diameter. 12mm.Drill Length. 20mm.

For use with 4 mm drill bit (not included).

These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key.Choose TCT for abrasive materials. They are designed to drill and countersink simultaneously a wide variety of materials.NOT SUITABLE FOR FERROUS AND NON FERROUS METALS. T.C.T.No.8 Wooscrew.Diameter: 5/8in.Drill Diameter: 3/16in.Overall Length: 1.1/4in.

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.

8 mm Shank.D = 8 mmC = 14 mmOL = 120 mm

8 mm Shank.D = 4 mm Diameter.C = 16 mm Depth of Cut.OL = 90 mm

8 mm Shank.D = 8 mmC = 14 mmOL = 80 mm

8 mm Shank.D = 6 mmC = 14 mmOL = 60 mm

8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm

8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm

This Trend 4/8 x 1/2 TCT Two Flute Cutter has the following specification: D: 25.4mm (1in)C: 25mmOL: 68mmShank Diameter: 1/2in

This Trend 4/80 x 1/2 TCT Two Flute Cutter has the following specification: D: 25.4mm (1in)C: 37mmOL: 66mmShank Diameter: 1/2in

This Trend 47/4 x 1/4 TCT Pierce Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter.Cutting Length: 18mm.Diameter: 6.3mm.Shank. 1/4in.

This Trend 4/60 x 1/4 TCT Two Flute Cutter has the following specification: D: 25mm (63/64in)C: 25mmOL: 56mmShank Diameter: 1/4in

This Trend 4/70 x 1/2 TCT Two Flute Cutter has the following specification: D: 25mm (63/64in)C: 25mmOL: 65mmShank Diameter: 1/2in

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 25.4 mm

Tooling Tungsten Carbide1/2 in Shank. Angle A = 90 D = 19.1 mmC = 25.4 mm

Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 19.1 mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 9.5 mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 25 mm

This trimmer has twin bearings for stability by increasing the bearing surface. An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T.1/2in ShankA Angle = 90 .C = 38.1mm.D = 12.7mm.

An industrial profiling tool for longer runs of work when a clean finish is needed. Tooling : T.C.T.1/4in Shank.. A Angle = 90 C = 25.4 mmD = 12.7 mm

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications: Tooling TCT.1/4in Shank. By changing the bearing, the size of the rebate can be altered, It is supplied with 3 bearings.22.0 mm bearing gives rebate of 1 mm.19 mm bearing gives rebate of 2.5 mm.16 mm bearing gives rebate of 4 mm.D = 24 mm.C = 12.7 mm.

1/4in Shank. By changing the bearing the size of the rebate can be altered.Supplied with four bearings.19 mm Bearing gives rebate of 7.9 mm16 mm Diameter gives rebate of 9.5 mm12.7 mm Diameter gives rebate of 11.1 mm9.5 mm Diameter gives rebate of 13.7 mmD = 35 mmC = 12.7 mm

1/2in Shank.By changing the bearing the size of the rebate can be altered.Supplied with 4 bearings.Use of :19 mm Bearing gives rebate of 7.9 mm.16 mm Bearing gives rebate of 9.5 mm.12.7 mm Bearing gives rebate of 11.1 mm.9.5 mm Bearing gives rebate of 12.7 mmD = 35 mmC = 12.7 mm

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mmC: 22.5 mmB: 12.7 mmE: 19.1 mmE: 15.9 mmOL: 78 mm Specifications: Shank Diameter: 1/2 inch.Shank length: 35 mm.

T.C.T.1/2in Shank.A = 45 C1 = 19 mmC2 = 26 mmD = 51.5 mmB = 12.7 mm

T.C.T.1/4in Shank.A = 45 C1 = 12 mmC2 = 16 mmD = 31.8 mmB = 9.5 mm

T.C.T.1/2in Shank.A = 45 C1 = 12 mmC2 = 16 mmD = 31.8 mmB = 9.5 mm

T.C.T.1/2in Shank.A = 45 C1 = 12 mmC2 = 16 mmD = 35.1mmB = 12.7 mm

Angle A = 90° D = 12.7 mmC = 50 mm

Angle A = 90° D = 18.2 mmC = 50 mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 19mmDiameter: 51mmCutter Height: 25mmShank: 1/2inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 16mmDiameter: 44.5mmCutter Height: 22mmShank: 1/2inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 12.7mmDiameter: 38mmCutter Height: 19mmShank: 1/4inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 12.7mmDiameter: 38mmCutter Height: 19mmShank: 1/2inBearings: 9.5, 12.7mm

This Trend 4/6 x 1/4 TCT Two Flute Cutter has the following specification: D: 20mm (25/32in)C: 25mmOL: 57mmShank Diameter: 1/4in

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 9.5mmDiameter: 32mmCutter Height: 16mmShank: 1/4inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 9.5mmDiameter: 32mmCutter Height: 16mmShank: 1/2inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 6.3mmDiameter: 25.4mmCutter Height: 13mmShank: 1/4inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 6.3mmDiameter: 25.4mmCutter Height: 13mmShank: 1/2inBearings: 9.5, 12.7mm

This Trend 4/6 x 1/2 TCT Two Flute Cutter has the following specification: D: 20mm (25/32in)C: 25mmOL: 66mmShank Diameter: 1/2in

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 4.8mmDiameter: 22mmCutter Height: 12.7mmShank: 1/4inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 1.6mmDiameter: 15.9mmCutter Height: 7.9mmShank: 1/4inBearings: 9.5, 12.7mm

This Trend TCT Bearing Guided Ovolo Round Over has the following specification: Radius: 3.2mmDiameter: 19mmCutter Height: 9.5mmShank: 1/4inBearings: 9.5, 12.7mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90 D = 19.1 mmC = 50 mm

Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 6.3 mmC = 25.4 mm

Tooling Tungsten Carbide1/4in Shank. Angle A = 90 D = 6.3 mmC = 12.7 mm

This Trend 4/60 x 1/4 TCT Two Flute Cutter has the following specification: D: 22mm (55/64in)C: 19mmOL: 50mmShank Diameter: 1/4in

This Trend 4/5 x 1/4 TCT Two Flute Cutter has the following specification: D: 19mm (3/4in)C: 25mmOL: 58mmShank Diameter: 1/4in

This Trend 4/5 x 1/2 TCT Two Flute Cutter has the following specification: D: 19.1mm (3/4in)C: 25mmOL: 67mmShank Diameter: 1/2in

This Trend 4/50 x 1/2 TCT Two Flute Cutter has the following specification: D: 19mm (3/4in)C: 37mmOL: 79mmShank Diameter: 1/2in