This wrench has been specially designed to make it easier to remove and install oil filters of PSA Group and Ford vehicles. Fitted with a swivel (45°) ratchet head, it allows easy access to narrow spaces, without requiring any further parts to be removed.

Required when nut caps
are damaged by impact wrenches

019380055 1938R/S5 1938 R/S5-sets 5 blades for 1938
Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55C7
Mobile roller cab with seven drawers
(588x367 mm), with ball bearing slides
• 4 castors, Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with thermoformed trays


C55PM + C55PT1,0x0,6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)


 467 kg

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oil and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55M4
Fixed module with four drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55PM + C55PT1,0x0.6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)

C55A2
• 1 two-door tool cabinet


 535 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55C7
Mobile roller cab with seven drawers (588x367 mm) with ball bearing slides
• 4 castors Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55PS
Tool wall system with shutter and framework
• Aluminium shutter, vertically adjustable, with lock
• Removable perforated tool panel


 347 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers (588x367 mm) with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55/2PM + C55/PF
Tool wall system with 2 suspended cabinets
• 2 suspended cabinets, 1024x400x300 mm, with gas springs
• 2 under-cabinet panels, 1024x620x25mm
• 2 under-cabinet perforated tool panels, 1024x620x25 mm


 350 kg

Combination comprising:
- Two-door tool cabinet (C55A2)
- Workbench (C55BO/2)
- Fixed module with 7 drawers (C55M7)
- Fixed service module (C55MS)
- Tool panel with suspended cabinets (C55/2PM)

Combination comprising:
- Workbench (C55BO/2)
- Roller cab module with 8 drawers (C55C8)
- Fixed module with 2 storage drawers (C55M2)
- Wall tool system with shutter (C55PS-O)

 334 kg
2.05x2.00x0.76 m

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

61 bits and 1 quick-release magnetic bit holder (items 861LP, 861PE, 861PH, 861PZ, 861TX, 861RTX, 861TRW, 861TQS, 861SP, 851SR)

New bit holder with articulated T handle

 420x185x60 mm –  3 kg

335x145x60 mm –  1,7 kg

52 hexagon bits, 10 mm, and 2 accessories
(items 867PE, 867PE/L, 867XZN, 867XZN/L, 867TX, 867TX/L, 867RTX, 867RTX/L, 867/1, 867/1)

Automatic blade loading Automatic blade loading

• Nonslip bi-material handle
• Automatic blade loading
• Blade locking nut for maximum blade stability under stress conditions
• Nonreturn safety slider
• Automatic blade loading

Features:
• Automatic blade change
• Screw blade locking system

• Interior blade storage
• Belt clip
• Sturdy aluminium frame

Features:
● With clip and fabric wallet with loop
● Anodized aluminium handle
● Safety blade lock

320x250x50 mm

260x160x55 mm –  1,0 kg

Features:
• Suitable for motorcycles
• Maximum capacity: 4 l
• Reduced splashing

Fitted with:
• high-resistance three-layer diaphragm and internal telescopic guide
• end-of-stroke stop and overloading safety valve
• can also be used on auto lifts

TECHNICAL DATA
capacity: 2 t
weight: 14 kg
power supply pressure: 8-10 bar
height: min.132 – max. 326 mm

Long version, suitable for use on lorries, articulated vehicles, buses and coaches, and agricultural machines
• automatic piston return
• two descent valves with under load speed control

TECHNICAL DATA
capacity: 70-43-23-13 tons
weight: 74 kg
power supply pressure: 8-10 bar
air consumption: 600 l/min

Quick, functional

Ideal for removing:
• hail dents
• dents caused by doors
• small dents in general
ideal for removing:
• hail dents
• dents caused by doors
• small dents in general

– 2 TORX T40-T45 bits
– 1 XZN 10 bit
– 1 hexagon bit, 8 mm
– 3 bi-hex bits, 10-12-13 mm

Convenient hanging wallet
for viewing all tools

Just two tools for many uses
High stress resistance

Takes just a few seconds to test compression.

Allows endothermic engine compression to be tested within just a few seconds, without requiring connection to engine, taking power from vehicle battery, through a dedicated software.

Step 1: calculating engine rpm
Step 2: testing battery voltage trend during each revolution
Step 3: displaying absorbed power and compression calculated through starter operation for each piston
Step 4: testing battery charge and efficiency

Technical data:
• Operating voltage: 12V DC (vehicle battery)
• Dimensions: 140x75x30 mm
• Clamp cable length: 1300 mm
• Weight: 215 g

https://youtube.com/watch?v=mWyKL-TJfaA%26hl%3Den%26fs%3D1%26rel%3D0

Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.

Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 1 shelf with adjustable position, 1 fixed shelf and door
• 4 useful side cable reels made of plastic
• 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with frame)
• Weight: 36.5 kg

Ideal for jobs in small areas

– Ultracompact, no more than 176 mm in length; ultralightweight, no more than 1.1 kg, with battery, perfectly balanced
– Double mechanical speed with steel gears and 18-position clutch
– Torque up to 34 Nm and 1500 rpm (350 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
– 2Ah batteries and charge indicator on drill body
– Triple battery self-protection (heat, overload and monitoring of charge differences (if any) between cells) for increased safety and durable high performance
– Ergonomic nonslip handle
– Front LED
– 10-mm autochuck
– Belt clip (right/left side)
– Selector switch, screwing-unscrewing-locking modes (for transportation)
– Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (45 min)

Composition:• 100% acrylic
• 3M Thinsulate™ padding
Colour:Black
UK: Taglia unica
EU:

Mechanical and hydraulic operation

Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
 530x470x140 mm –
2,0 kg

• Mechanical and hydraulic operation
• Includes one 12-t hydraulic jack
• Can be directly used on vehicle with mounted engine
• Numerous adjustment options on head make it possible to work on most engines available

• Sturdy and handy
• Autochuck
• Reversible lever
• Slip-proof handle
• Exhaust through handle

• “Pin Clutch” impulse device
• Lightweight and powerful
• Three power adjustable positions
• Exhaust through handle
• Balancing hook
• “Pin Clutch” impulse device

Set of 6 pin punches with handles
2-3-4-5-6-8 mm

Highly lubricating and protective.
Suitable for milling, boring, threading, drilling and manual and automatic machine working.
Highly resistant to oxidation.
Water washable. Solvent-free.


OPERATING INSTRUCTIONS: Shake before use. Water washable.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Silicone lubricant and detacher.

Features:
• Suitable for lubricating plastic, rubber and metal parts. Protects from corrosion
• Detaching, antiadhesive for plastic and rubber moulding. Antistatic, for worktops
• Waterproof, protects from humidity and weather corrosion
• Protective, for electric circuits. Can be used to polish wood, plastics and rubber
• Solvent-free


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Mineral grease mixed with copper.
Suitable for lubricating joints, bolts, gears, driveshafts and other metal parts subject to high temperatures (up to 1,000 °C).
Ideal for preventing seizure and making it easy to unlock threads and parts in general.
Protective, anti-wear. Prevents oxidation. Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Lubricating grease mixed with PTFE.
Particularly useful for lubricating industrial chains and mechanical movements subject to heavy stress and low rotation speeds.
Also suitable for hinges, locks, drawer slides, gates and applications on plastics and rubber.
Totally colourless. Waterproof and resistant to oxidation.
Highly resistant to cold and heat (-30 °C to +220 °C).


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Based on grease with lithium, titanium and zinc oxide soaps. Ideal for lubricating gears, bearings and joints.
Specific for marine applications.
Highly resistant to water, sea salt, weather and high temperatures.
Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 25 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Features:
• Particularly useful for lubricating chains, gears and moving metal parts as well as hinges, locks and pivots
• Resistant to friction and weather
• Highly resistant to high temperatures (up to 210 °C)
• Highly adhesive. Does not drip


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 15 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Unlocking lubricant, super-penetrating
Unlocking, deoxidizing, highly penetrating, for quick rust and oxidation removal from nuts, bolts, screws and gears.
Waterproof, for water and humidity removal from treated parts.
Highly resistant to cold and heat (-40 °C ÷ +150 °C).


DIRECTION FOR USE: Apply product and wait a few minutes.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

7-in-1 multipurpose unlocking lubricant
Adjustable Straw.
7 in 1.
1. Unlocking: dissolves rust from nuts, bolts and gears in general.
2. Lubricating: suitable for all mechanical parts subject to stress.
3. Detergent, degreasing: removes grease and oil from metal surfaces.
4. Rust protective: forms a film protecting against corrosion from weather.
5. Deoxidizing, for electrical contacts: reactivates contacts and prevents short circuits.
6. Waterproof: removes water and humidity from all surfaces.
7. Antifreezing: highly resistant to low temperatures (up to -40 °C).
Fitted with a special valve allowing supply when spray can is upside down.
Silicone-free.
ADJUSTABLE STRAW allows - through a special modular straw - application on parts which would be difficult to reach with a standard dispenser.


Directions for use:
Apply product and wait a few minutes.
To unlock: use suitable tools.
To degrease: clean with a cloth.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

095260010 9526P

095260005 9526F

• 92% polyester, 8% spandex,
• 160 g/m²
• Colour: black

Composition
92% polyester, 8% spandex
• Long-sleeved technical undershirt
• Technical underpants with stretch waistband
Colour
Black
XS-S, M-L, XL-XXL

Composition
97% cotton, 3% stretch fabric, 220 g/m2
Design
• Elastic waistband
• Two large front pockets
• Two rear pockets with strap closure
• Large front pockets with strap closure
• Waist key ring
• Rear band with Beta logo
• Reflex logo on left-leg pocket
Colour
Grey with reflective grey details
XS, S, M, L, XL, 2XL, 3XL
46, 48, 50, 52, 54, 56, 58

Composition
T/C canvas, 65% polyester, 35% cotton, 260 g/m2
• Inserts and pads made of “Oxford” polyester/PU, 220 g/m2
• Cuffs with strap adjusters
• Front strap closure with flap-covered double tap zip
• Adjustable waist
• Chest pockets with strap closure, pen pocket and badge insert
• Two deep waist pockets with press-stud closure
Colour
Blue
XS, S, M, L, XL, XXL, XXXL, XXXXL

Composition
• 97% cotton, 3% stretch fabric, 220 g/m2
• Stretch fabric inserts, 90% nylon, 10% spandex; 260 g/m2
• Knee pad pockets and leg bottoms reinforced in polyester 300D
Design
• Slim fit
• Tearproof crotch
• Stretch fabric insert in inside leg for easier movements
• Stretch waistband on sides
• Two large front pockets, one with small pocket
• Two rear pockets with strap closure
• Large side pocket with strap closure
• Waist key ring
• Knee pad pockets and reinforced leg bottoms
Colour
Black, with pink inserts
XS, S, M, L, XL, 2XL, 3XL
38, 40, 42, 44, 46, 48, 50

CONVENIENCE
Stretch fabric and ergonomic details, for unparalleled comfort in every movement.
Accurate details and addition of ruler and hammer pockets, ensuring unique convenience for the most demanding workers.

STRENGTH
The addition of hard-wearing fabric inserts results in remarkable strength and durability.

Composition
• 98% denim cotton, 2% stretch fabric, 370 g/m2
• reinforcements made from abrasion-resistant "Oxford" fabric
100% polyester/PU; 220 g/m2
Design
• Two large front pockets
• Two rear pockets
• Large left-side pocket with strap closure
• Hammer loop
• Ruler pocket
• Knee pad pockets with "Oxford" reinforcement
• "Oxford" reinforcement on leg bottoms, ruler pockets and pocket trims
Colour
Denim blue
XS, S, M, L, XL, 2XL, 3XL
46, 48, 50, 52, 54, 56, 58

070760009 7076BC

070760009 7076BC

• Wheel Ø: 76 mm

2 products in 1: creeper or seat.
Not available in the USA, Canada and Mexico.
• Steel frame
• PVC lining with upholstery
• Easily convertible into a creeper or a seat

Made from non-slip EVA foam

Suits most car seats, steering wheels and gear knobs


• One size fits all
• Reusable and washable
• Made of hard-wearing nylon with stretch strings
• Material: 98% polyamide/nylon, 2% polyurethane

Allows front part of vehicle to be protected, while leaving openings for headlights and radiator


- Waterproof
- Resistant to oil and grease
- Strap fixing
- Material: 98% polyamide/nylon, 2% polyurethane

Features:
• Overall height: 460 mm
• 3 drawers with ball bearing slides
• Front tote-tray
• Rear tote-tray with partitions
• 4 pivoting castors
• Weight: 10.6 kg
 10,6 kg

Made of plastic-coated fabric, with 4 suction cups on top side

New Item
Anti-loosening locking screw,
made of stainless steel
Kevlar®
Fibre optics
• Made of steel specially treated to work on cut-proof materials, including aramidic fibres, e.g. Kevlar®
• Also suitable for fibre optics

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

100% Italian made: unparalleled reliability and sturdiness
for professional uses
Particularly recommended for surface finishing jobs on several materials (metal, plastic, glass, ceramic, wood etc.). The cabin is made from properly reinforced sheet steel which results in unparalleled sturdiness and firmness.
The cabin is equipped with the following:
- loading door with magnet closure
- perforated sheet metal top
- standard connection for vacuum cleaners, ø 36 mm
- protective polycarbonate viewing window, 6 mm
- LED lamp
- pneumatic circuit (compressed air inlet)
- sanding gun with trigger operation


TECHNICAL DATA
Useful dimensions of cabin: 600x520x320 mm
Overall dimensions: 660x530x500 mm
Weight: 38 kg
Worktop: perforated sheet metal
Lighting: LED
Air consumption: 340 l/min at 7 atm
Power supply: 220 V - 50 Hz

Cartridge capacity: 310ml Bag capacity: 310ml Not suitable for use with loose bonds

017720029 1772H 170 18 213,4

070760039 7076BU

for deforming plastics and unlocking metal parts
35 g tank

• three interchangeable nozzles: 550 °C; 1000 °C; 1300 °C
• supplied with a stand in hard case

4 sensors with TRUE COLOR filter.
Solar cell power supply and lithium batteries for outstanding LCD filter life.

Features:
• Viewing area: 98x80 mm
• Darkening shade range: 5÷8.5/ 9-13, internally adjustable
• UV/IR protection: DIN16
• Light to dark time: 1/25000 s
• Dark to light time: 0.1-2.0s
• Adjustable darkening sensitivity and delay
• Auto on/off
• Grinding feature
• Low battery indicator
• Ergonomic design, lightweight, well-balanced
• With adjustable ring nut

Features:
● Viewing area: 92x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/1000 s
● Dark to light time: 0.1-1.0 s
● Adjustable darkening delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

Lightness
Suede and microfibre, waterproof, with carbon inserts
Comfort
Dual-density polyurethane
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Anatomically shaped, with cushioning heel lift
Weight
590 g
EU: 35-48 UK: 2,5-13

• Composite toe cap
• Composite fibre penetration-proof insole

Lightness
Highly breathable mesh fabric and suede
Comfort
Dual density polyurethane
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Anatomically shaped, with cushioning heel lift
Weight
510 g
EU: 35-48 UK: 2,5-13

Lightness
Suede, waterproof, with water-proof nylon inserts
Comfort
Heat-proof nitrile rubber
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Felt carbon
Weight
670 g
EU: 35-48 UK: 2,5-13

Lightness
Action nubuck, water-repellent, with anti-abrasion insert in toe cap area
and refractive heel insert
Comfort
Single-density polyurethane
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Carbon, anatomically shaped
Weight
510 g
EU: 35-48 UK: 2,5-13

The remarkably hard-wearing and innovative materials chosen for the shoes ensure outstanding water protection (waterproofness), strength and durability.

Lightness
• Made from highly abrasion-resistant fabric
• Inserts made from TPU (Thermoplastic polyurethane)
• Heel stability support
• Traditional lacing
• Wide fit
• Waterproof, with bootie membrane, windproof, highly breathable
Comfort
• EVA (Ethylene Vinyl Acetate)
• Durable nitrile rubber tread, for increased slip resistance
Design
• Polymer material, 200 joules
• Composite fibre penetration-proof insole, ceramic treatment
Safety
• EVA FOAM polyurethane cover with cushioning heel pad helping to prevent and alleviate pain in those who stand for long periods or walk much while working
Peso
550 g
EU: 38-48 UK: 5-13

Lightness
EXTREMELY LIGHT - approximate weight for size 42: 465 grams
Comfort
Underfoot cover: EVA (Ethylene-Vinyl Acetate) FOAM with cushioning heel pad
Design
• Waterproof mesh fabric with TPU (Thermoplastic Polyurethane) inserts
• Heel stability support
• Stretch slip-on collar
Durability
Outsole:
• EVA (Ethylene-Vinyl Acetate) midsole
• Durable nitrile rubber tread
Safety
Toe cap: polymer material, 200 joules
Penetration-proof insole: composite fibre, ceramic treatment
Weight
465 g
Sizes
EU: 38-48 UK: 5-13

• Composite toe cap
• Composite fibre penetration-proof insole

Lightness
Water-repellent Action nubuck with anti-abrasion insert in toe cap area
Comfort
Single-density polyurethane
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Carbon, anatomically shaped
Weight
500 g
EU: 35-48 UK: 2,5-13
• Remarkably flexible and lightweight - approximate weight for size 42: 500 g
• Not recommended for heavy-duty jobs (building, agriculture, heavy industry)

• Sheet metal frames and plastic tops
• 3 detachable modules:
1 upper tool box, 220 mm high 1 central module, 165 mm
high,with 2 drawers, 60 mm high 1 lower module, 330 mm
high, with up-and-over door, 280 mm high, with castors
• Castors ø 128 mm
• Telescopic handle, can be adjusted in 4 positions
• Module release system with access to all tool compartments
• Upper tool box with removable interior
object compartment and 2 tote-trays built into cover

BW 42 Combination wrenches 8-10-11-12-13-14-15-17-19 mm 9
BW 1150BM 180 Heavy-duty combination pliers  180 mm 1
BW 1082BM 160 Diagonal cutting nippers  160 mm 1
BW 1770RL 9-mm snap-off spare blades, 10 pieces,
for utility knives BW 1770, BW 1770A and BW 1770BM 10x 10

Features:
• Maximum capacity: 10 t
• Manual 2-speed pump
• Moving piston
• Automatic piston return
• Set of V-shaped prisms included
• Chrome-plated stand

• Composite toe cap
• Composite fibre penetration-proof insole

Lightness
Water-repellent Action nubuck with mesh insert and anti-abrasion reinforcement in toe cap area
Comfort
Single-density polyurethane
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
Carbon, anatomically shaped
Weight
550 g
EU: 35-48 UK: 2,5-13
• Remarkably flexible and lightweight - approximate weight for size 42: 550 g
• Not recommended for heavy-duty jobs (building, agriculture, heavy industry)

The remarkably hard-wearing and innovative materials chosen for the shoes ensure outstanding water protection (waterproofness), strength and durability.

Lightness
• Made from highly abrasion-resistant fabric
• Inserts made from TPU (Thermoplastic polyurethane)
• Heel stability support
• Traditional lacing
• Wide fit
• Waterproof, with bootie membrane, windproof, highly breathable
Comfort
• EVA (Ethylene Vinyl Acetate)
• Durable nitrile rubber tread, for increased slip resistance
Design
• Polymer material, 200 joules
• Composite fibre penetration-proof insole, ceramic treatment
Safety
• EVA FOAM polyurethane cover with cushioning heel pad helping to prevent and alleviate pain in those who stand for long periods or walk much while working
Peso
550 g
EU: 38-48 UK: 5-13

REMARKABLY LIGHTWEIGHT - approximate weight for size 38: 390 grams

Lightness
• Stretch slip-on collar
• High-visibility reflective mesh upper
• Highly breathable mesh fabric with TPU (thermoplastic polyurethane) inserts
Comfort
• Durable nitrile rubber tread
• EVA (ethylene vinyl acetate) midsole
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
• Heel stability support
• EVA FOAM with cushioning heel pad
Weight
390 g
EU: 34-42 UK: 2-8

Lightness
REMARKABLY LIGHTWEIGHT - approximate weight for size 42: 330 grams
Comfort
EVA (Ethylene-Vinyl Acetate) FOAM underfoot cover with cushioning heel pad
Design
• Highly breathable mesh fabric with TPU (Thermoplastic Polyurethane) inserts
• Heel stability support
• Stretch slip-on collar
Durability
Sole:
• EVA (Ethylene-Vinyl Acetate) mid-sole
• Durable nitrile rubber tread
Safety
• Without toe cap
• Without penetration-proof insole
Weight
330 g
EU: 39-48 UK: 6-13

Remarkably lightweight.
Approximate weight for size 42: 450 g

Lightness
• Hard-wearing, ultrabreathable woven fabric
• One-piece upper with lightweight, hard-wearing threads
• Wider mesh for increased breathability
• Narrower mesh for increased foot support
• Heel stability support
• Wide fit
Comfort
• EVA (Ethylene Vinyl Acetate) midsole
• Durable nitrile rubber tread
Design
Polymer material, 200 joules
Durability
Composite fibre, ceramic treatment
Safety
EVA FOAM, with cushioning heel pad
Weight
450 g
EU: 38-48 UK: 5-13

Coolant funnel with quick couplings
Funnel capacity: 1600 ml
with non-return valve, to avoid air bubble formation


Included accessories:
• 4 extension units for small spaces
• 4 quick couplings for coolant tank
• 3 rubber reduction units
235 g

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Rechargeable, ultracompact spotlight
• Abundant ready Lighting: with a maximum lighting capacity of 720 lumens, and running on both battery and cable, it is always ready to use
• Can be placed anywhere:
on flat surfaces: with rubber feet on three sides or 1/4" drive for stands (camera-like standard)
on metal structures: with unscrewable magnet or hook that can be rotated 360 degrees
• Compact: no more than 85x100x155 mm in size, it can be easily replaced in tool bag and used in small areas
• Sturdy: designed to withstand extremely severe mechanical stress. Guaranteed durability


• IP65 - without external power supply
• Dual brightness: 720 / 360 lumens
• Lithium polymer battery 7.4 V 4000 mAh
• Life 4-7 hours (depending on brightness)
•12V cigarette lighter or 230V plug socket charger, it also allows operation with a completely flat battery
• 12V rubber bayonet connector
• Recharge/on-off cable, 5 m long
● White light, 4500 °K
 820 g

Feeler gauges for car body repair shops, pair, 10-bladed, with suction cup
Suitable for:
• fitting rear windows
• maintaining position during installation


 50 g