• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

Features:
• Maximum capacity: 10 t
• Manual 2-speed pump
• Moving piston
• Automatic piston return
• Set of V-shaped prisms included
• Chrome-plated stand

Coolant funnel with quick couplings
Funnel capacity: 1600 ml
with non-return valve, to avoid air bubble formation


Included accessories:
• 4 extension units for small spaces
• 4 quick couplings for coolant tank
• 3 rubber reduction units
235 g

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Feeler gauges for car body repair shops, pair, 10-bladed, with suction cup
Suitable for:
• fitting rear windows
• maintaining position during installation


 50 g

Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

C25
Tank trolley with shelf
Main features:
• Foldaway lid.
• 1 sliding drawer.
• Tool tray protected by foamed rubber mats.
• Shelves protected by oil and fuel proof mats.
• Four castors 100 mm in ø:
2 fixed and 2 swivelling (one with brake).
• Safety lock.
• One more shelf M4 can be added on the opposite side.
• Empty thermoformed tray for 1/2" sockets and accessories (024990104).
• Paper roll holder item 2499PC
can also be included


 31,5 kg

1752
Plastic pressure cans, rigid spouts
For use with oil with density ranging from ISO22 to ISO68

1567
Lever for removing wishbone heads and shock absorbers from pillar
One operator can position lever effortlessly
and proceed with disassembly.

It is enough to apply a force of 20 Nm.

Double ended hexagon / bi-hex socket wrenches, chrome-plated
• Can be used with sliding handle in through hole.
• Hole on short side allows access to nut, e.g. with projecting threads.

Ideal for cars and commercial vehicles

allows quicker replacement jobs on:
- timing belt
- water pump
- alternator

ADVANTAGES
- it takes operator just a few seconds to apply cross member and fix it under vehicle
- includes 2 pairs of stabilizer pins, to work on cars, vans and commercial vehicles
- loading belt allowing cross member to be held steady, even when chassis does not have any holes

TECHNICAL DATA
max. capacity: 250 kg
length: 1050 mm
height: 120 mm
max. jack height: 260 mm
weight: 12 kg

Electro-hydraulic motorcycle jack, 600 kg


Technical specifications:
• Electrical, mechanical and hydraulic safety devices
• Capacity: 600 kg
• Integrated electro-hydraulic unit: 230V - 50 Hz
• Hydraulic pump
• Controlled downward speed
• Safety fuses for protection in case of cable cuts
• Control push button panel
• CE-certified, TÜV-approved

Injection/extraction carpet/upholstery cleaner
Highly effective for
car seats and interiors
Ideal for deeply cleaning textile surfaces.
It dispenses pressure sprayed detergent and sucks it up with dirt, leaving surfaces almost dry.

Supplied accessories:
• 1 hose complete with ergonomic handle
• 1 dispenser unit
• 2 hard extensions
• 1 small spray extraction nozzle
• 1 big spray extraction nozzle
• 6 power cord locknuts


Technical data:
• Voltage: 230/240 V
• Frequency: 50/60 Hz
• Max. power: 1100 W
• Airflow rate: 58 l/sec.
• Max. drum capacity: 20 l
• Max. detergent tank capacity: 3 l
• Max. pump pressure: 7 bar
• Max. suction pressure: 21 kPa
• Pump power: 48 W

Portable car and commercial vehicle starter, 12-24V
New-generation battery


Technical Data:
• Pickup current: 4200A (12V) - 2100A (24V)
• Shoulder strap included
• Sealed lead acid battery, solid electrolyte (AGM) type
• Weight: 17 kg

Digital automotive multimeter


Technical Data:
• RPM (tachometer):
For 2 and 4 cylinder engines
RPM4 600 - 4000 RPM
RPM4 600 - 12000 RPM (x10 RPM)
RPM2/DIS 300 - 4000 RPM
RPM2/DIS 300 - 6000 RPM (x10 RPM)
• Dwell angle: 4-8 CYL
• DC voltage: 400mV-4/40/400/1000V
• AC voltage: 4/40/400/700V
• DC current: 40/400mA-4/20A
• AC current: 40/400mA-4/20A
• Resistance: 400Ω-4/40/400kΩ-4/40MΩ
• Capacity: 40/400nF-4/40/100µF
• Frequency: 5/50/500Hz-50/500-10MHz
• Duty cycle: 0.1 % - 99.9%
• Pulse amplitude: 1 - 10ms
• Diode test: Test current 0.3mA
• Continuity: <150Ω - Test current <0.3mA
• Display: High-contrast, backlit 4-digit LCD
• Overvoltage: Category II 1000V
• Auto power off: 30 minutes
• Power supply: 1 9V battery (included)
• Inductive clamp (included)
• 2 tips (included)
• Soft cloth case (included)
• Operating manual

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

Makes it possible to work on vehicles that are high from the ground and have a long shock absorber travel:

Features:
• Controlled descent speed
• Quick approach pedal
• Nylon wheels

Kit contents:
• round ball head rod, Ø 31 mm, length 110 cm
• tip rod, length 62 cm
• whale tail tip rod, length 112 cm
• hook tip rod, length 27 cm
• flat round head rod, length 50 cm
• round ball head rod, Ø 19 mm, length 52 cm
• whale tail head rod, length 27 cm
• round whale tail head rod, length, 28 cm
• fabric bag with handles

Kit contents:
• oil pressure pump, 10 t, with 1.5-m-long hose, 1/2" coupling
• piston
• wing opening pliers; capacity: 500 kg
• baseplate, 150x90 mm
• L-shaped base, 50x50 mm
• 4-point punch
• round, knurled punch, Ø 50 mm
• wedge-shaped punch, 43 mm
• 170-mm-long extension
• 300-mm-long extension
• 400-mm-long extension
• 530-mm-long extension
• rubber head
• male-to-male coupling for installing accessories

Specifications:
• contact surface covered in polyethylene
• tray dimensions: 340x845x40 mm
• foldable

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21 mm 16
96T offset hexagon key wrenches  2-2,5-3-4-5-6-7-8 mm 8
97TTX drivers for Torx® head screws, with handles  TX10-TX15-TX20-TX25-TX30 5
1084 Heavy-duty diagonal cutting nippers  160 mm 1

Main features:
• 6 fully removable drawers (588x367 mm), with ball bearing slides:
4 drawers 70 mm high
1 drawer 140 mm high
1 drawer 280 mm high

Features:
• ABS reinforced worktop, solid and sturdy
• Multi-purpose top with anti-fall edges and 8 holes for accommodating screwdrivers
• 4 castors Ø 125 mm - 2 fixed and 2 steering (one with brake)
• Front centralised safety lock
• Static load capacity: 800 kg

Mobile roller cab with 7 drawers, with wood worktop and anti-tilt system, long model
Work surface increased by no less than 25%!
Long model with 7 fully removable drawers (882x367 mm), with ball bearing slides:
• 5 drawers, 70 mm high
• 1 drawer, 140 mm high
• 1 drawer, 210 mm high

• Multi-ply wood worktop with holes for a vice 1599F/100 or 1599GI/100 (to be ordered separately)
• Sturdy nylon front, with built-in label holder
• Drawer bases protected by foamed rubber mats
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 1.100 kg
• Built-in side bottle holder (can be applied on both sides)
• Built-in paper roll holder
• Each drawer can accommodate up to 6 EVA foam or ABS thermoformed trays


Following accessories can be added:
• perforated tool panel with supports 2400 RSC24AXLP/PF
• computer bracket 2400 RSC24/SPC
• side tool tray 2400 RSC24AXLP/VL
• waste bin 2400 RSC24AXLP/CPR
• folding side shelf 2400 RSC24/MP
 105 kg

900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives  1/4 -  3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers  3/8 -  1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives  3/8 -  1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 17
920/15 adaptor, 1/2” female and 3/8” male drives  1/2 -  3/8 1
910/25 3/8" drive universal joint 1
920AN 1/2” wobble extension bar 125 - 250 mm 2
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6L-8-8L-10-10L-12L mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
1692/5 measuring tape 5 m 1
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  4,5x80-6x100-8x150 mm 3
1292N screwdriver for cross head Phillips® screws, extra-short series  6x30 mm 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

Features:
• 3 tops covered in antislip ribbed rubber
• Ergonomic handle
• Two fixing options for central worktop
• Four castors Ø 100 mm:
• 2 fixed and 2 steering (1 with brake)
• Static load capacity: 200 kg (distributed between3 shelves)

Ideal for diagnostics
Useful and functional
Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.


Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 2 central shelves with adjustable position and 1 fixed low shelf
• 4 useful side cable reels made of plastic - 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with brake)
• Weight: 43 kg

• 8 drawers (588x367 mm),
with ball bearing slides:
7 drawers, 70 mm high
1 drawer, 210 mm high
• Drawer bases protected
by foamed rubber mats
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 800 kg
• Thermoplastic worktop
• Built-in side bottle holder


BW 1253 Mains testing screwdriver   0,5x100 mm 1
BW 42 Combination wrenches  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 22
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches   1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 900 Hexagon hand sockets, 1/4"   4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900L Hexagon hand sockets, long series, 1/4"    4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900FTX Hand sockets for Torx® head screws, 1/4"    E4-E5-E6-E7-E8-E10 6
BW 900ME Socket drivers for hexagon screws, 1/4"    3-4-5-6-7-8 mm 6
BW 900TX Socket drivers
for Torx® head screws, 1/4"    T06-T07-T08-T09-T10-T15-T20-T25 8
BW 900LP Socket drivers for slotted head screws, 1/4"    0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
BW 900PH Socket drivers for
cross head
Philips® screws, 1/4"    PH0-PH1-PH2-PH3 4
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866   1
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 150 mm 1
BW 900/42 1/4” drive sliding T-handle 115 mm 1
BW 900/55 Reversible ratchet, 1/4"   150 mm 1
BW 910A Hexagon hand sockets, 3/8"    6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm 18
BW 910AL Hexagon hand sockets, long series, 3/8"    8-10-11-12-13-14-17-19 mm 8
BW 910FTX Hand sockets for Torx® head screws, 3/8"    E6-E7-E8-E10-E11-E12-E14 7
BW 910PE Socket drivers for hexagon screws, 3/8"    4-5-6-7-8-9-10 mm 7
BW 910TX Socket drivers for Torx® head screws, 3/8"    T15-T20-T25-T27-T30-T40-T45 7
BW 910/21  75 mm 1
BW 910/22  150 mm 1
BW 910/25 Universal joint, 3/8"  1
BW 920/15 Adaptor - F1/2"xM3/8"  1/2" -  3/8" 1
BW 1256/C21-1  4 mm 22
BW 55 Double open end wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 90 Double ended deep offset ring wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 97TX/SC8 Set of 8 offset key wrenches,
for Torx® head screws,
burnished, with plastic support  T9-T10-T15-T20-T25-T27-T30-T40 8
BW 910/16F Adaptor - F3/8"xM1/2"  3/8" -  1/2" 1
BW 920A Hexagon hand sockets, 1/2"    8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 20
BW 920FTX Hand sockets for Torx® head screws, 1/2"    E10-E12-E14-E16-E18-E20-E22-E24 8
BW 920PE Socket drivers for hexagon screws, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920PE-L Socket drivers for hexagon screws, long series, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920TX Socket drivers for Torx® head screws, 1/2"    T27-T30-T40-T45-T50-T55-T60 7
BW 920TX-L Socket drivers for Torx® head screws, 1/2"    T30-T40-T45-T50-T55-T60-T70 7
BW 920AL Hexagon hand sockets, long series, 1/2"    10-12-13-14-15-16-17-18-19-21-22-24-27-30-32 mm 15
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 920/55 Reversible ratchet  260 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1052 Adjustable self-locking pliers,
concave jaws 190-240 mm 2
BW 1082BM Diagonal cutting nippers   160 mm 1
BW 1098 Construction worker’s pincers 220 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1150BM Heavy-duty combination pliers   180 mm 1
BW 1166BM Extra-long needle knurled nose pliers   200 mm 1
BW 1168BM Extra-long bent needle knurled nose pliers   200 mm 1
BW 30 Drift punches Ø 2-3-4 mm 3
BW 31 Pin punches Ø 2-3-4-5-6-8 mm 6
BW 32 Centre punches Ø 4 mm 1
BW 34 Flat chisels 150-175-200 mm 3
BW 36 Cape chisels 130 mm 1
BW 1370 Engineer's hammers  500 g 1
BW 1390 Soft face hammer, plastic faces Ø 35 mm 1
BW 1692/3 Measuring tapes 3 m 1
BW 1712T Telescopic magnet 1
BW 1719BMA8/Q Second-cut square files, with handles  200 mm 1
BW 1719BMA8/T Second-cut triangular files, with handles ▲ 200 mm 1
BW 1719BMA8/P Second-cut flat files, with handles ▌200 mm 1
BW 1719BMA8/M Second-cut half-round files, with handles  200 mm 1
BW 1719BMA8/R Second-cut round files, with handles  200 mm 1
BW 1737NX Brake shoe cleaning brush 270 mm 1
1201E Screwdrivers for slotted head screws   2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN Screwdrivers for slotted head screws   4x30 mm 1
1202E Screwdrivers for cross head Phillips® screws   PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN Screwdrivers for cross head Phillips® screws   PH1x30 mm 1
1207E/TX Evox screwdrivers for Torx® head screws   T06-T07-T08-T09-T10-T15-T20-T25-T27-T30-T40-T45 12
1032 Internal circlip pliers, straight pattern  19÷60 mm 1
1034 Internal circlip pliers, bent pattern  19÷60 mm 1
1036 External circlip pliers  19÷60 mm 1
1038 External circlip pliers, bent pattern  19÷60 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
1771 1
BW 910/55 Reversible ratchet  205 mm 1
943E Hexagon nut spinners with handles  6-7-8-9-10-11-12-13 mm 8
BW 96T Offset hexagon key wrenches, with high torque handles 2-2,5-3-4-5-6-7-8 mm 8
BW 1149F Front wire stripping pliers, self-adjusting 175 mm 1
BW 1602 Crimping pliers
for insulated terminals 0,75÷6  mm² 1
BW 1603 Crimping pliers for non-insulated
terminals 1,25÷5,5  mm² 1
BW 1606T Crimping pliers for tubular terminals, 4-sided crimping 0.1÷10 mm² 1
BW 1608 Crimping pliers for insulated terminals,
with pressure regulator 0,5÷6  mm² 1
BW 141 Ratcheting combination wrenches 8-9-10-11-12-13-14-15-17-19 mm 10
BW 410/SP19 Set of rolled twist drills,
in plastic case Ø 1÷10 mm x 0.5 mm 19
BW 1725CR Mini hacksaw frame 260 mm 1
BW 97TTX Offset key wrenches with handles for Torx® head screws T8-T9-T10-T15-T20-T25-T27-T30-T40 9
BW 1682 Flexible graduated rules 300 mm 1
BW 1650 Sliding gauges 150 mm 1
BW 1380 Lump hammer 1000 g 1
BW 720 Impact sockets, 1/2"  10-12-13-15-17-19-21-24 mm 8
BW 720L Impact sockets, long series, 1/2"  17-19-21-22 mm 4
BW 720/21 125 mm 1
BW 900/16 Adaptor - 1/4"  1/4" -  3/8" 1
BW 910/15 Adaptor - F3/8" xM1/4  3/8" -  1/4" 1
BW 920/16 Adaptor - F1/2"xM3/4"  1/2" -  3/4" 1
BW 943FL Flexible hexagon nut spinners
with handles  6-7-8 mm 3
BW 1687D 153 mm 1
BW 1687U 153 mm 1
BW 1687A 153 mm 1
BW 1687AC 153 mm 1
BW 1725 Hacksaw frame 420 mm 1
BW 1833S High-brightness LED torch,
made of sturdy anodized aluminium,
up to 200 lumens 200 lumen 1

The evolution of the C24S roller cab!
Reinforced worktop and a wide range of dedicated accessories!
Available in 7 different colour combinations!
New ABS reinforced worktop, designed to support tool chests RSC22, RSC23, RSC23C and RSC23T.
Main features:
• 7 fully removable drawers (588x367 mm), with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Multi-purpose top with anti-fall edges and eight holes for accommodating screwdrivers
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Built-in bottle holder (can be applied on both sides).
• The following accessories can be added:
wood worktop 2400 RSC24/PL
perforated tool panel 2400 RSC24/PF
folding shelf 2400 RSC24/MP
computer wall bracket 2400 RSC24/SPC
document holder 2400 RSC24//PD (available in anthracite grey or black)
paper roll holder 2400 RSC24/PC (available in anthracite grey or black)
• Drawer bases protected by foamed rubber mats.
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays.

For mechanics, industrial maintenance and car repair professionals as well as for anybody whose hobby is much more than just a diversion.

910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6-6L-8-8L-10-10L-12L mm 8
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x1516x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1/4-1/4 1
895/3 socket holder 1/4-3/8 1
895/6 socket holder 5/16-1/2 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,51,2x8 mm 4
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives 1/4-3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
900BG/30 1/4" drive spinner handle 1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers 3/8-1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives 3/8-1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-1011-12-13-4-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920AN 1/2” wobble extension bar 125-250 mm 2
920/15 adaptor, 1/2” female and 3/8” male drives 1/2-3/8 1
920/25 1/2" drive universal joint 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  PH1-PH2-PH3 3
1292N screwdriver for cross head Phillips® screws, extra-short series  PH2 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4
31 pin punches 2-3-4-5-6-8 mm 6
32 centre punch 4 mm 1
34 flat chisels 125-150-75 mm 3
36 cape chisels, standard type 125 mm 1
1370 engineer’s hammer 500-1000 g 2
1712TF telescopic magnet with flexible head 1
1390 soft face hammer Ø 35 mm 1
1692 measuring tape 5 m 1
1032 circlip pliers straight, internal  180 mm 1
1034 circlip pliers bent, internal  170 mm 1
1036 circlip pliers straight, external  175 mm 1
1038 circlip pliers bent, external  175 mm 1
1177BM smooth half - round long needle nose pliers  140 mm 1
1188BM diagonal cutting nippers  125 mm 1
1257LP micro-screwdrivers for slotted head screws  2,0-2,5-3,0-3,5 mm 4
1257PH micro-screwdrivers for cross-head Phillips® screws  0-00 2
97TTX drivers for Torx® head screws, with handles  T10-T15-T20-T25-T27-T30-T40-T45-T50 9
1052 self - locking pliers 240 mm 1
1058 adjustable self locking pliers, long jaws 175 mm 1
1481PL/A plastic hose pliers 1
1481PL/B plastic hose pliers 1
1481PL/C plastic hose pliers 1
1650 sliding gauge 1
1708/20 metric feeler gauge 1
1716P packing scraper 1
80 double swivel end socket wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
920/36A 1/2” drive swivel handle 1
965 pry bar with handle 450 mm 1
1715 telescopic joint inspection mirror 670 mm 1
1719BMA8/M second cut files 200 mm 1
1719BMA8/P second cut files 200 mm 1
1719BMA8/Q second cut files 200 mm 1
1719BMA8/R second cut files 200 mm 1
1719BMA8/T second cut files 200 mm 1
1737NX Steel wire brush 1

• Microprocessor for managing welding parameters
• Contact and manual welding cycle start
• Automatic spot welding time setting function
• Supplied with quick coupling gun and 2.2-m-long ground cable

Accessory kit contents:
• extractor hammer
• three-pointed washer head
• 10 three-pointed washers
• carbon electrode
• squashing electrode


Technical data:
• Power supply: 230V
• 50% power: 2.5 KVA
• Power peak: 13 KVA
• Amp output: 2850 (2%) A
• Max. Amp output : 3200 A
 kg 23

The wrench that does not require releasing tension after use. 100% Italian-made, it is ideal for controlled tightening of screws/bolts.


ZERO-RESET TECHNOLOGY: Based on higher-performance materials and improved heat treatment of both the spring and the component parts of the adjustment system, the wrench no longer requires releasing tension after use.
EASY SETTINGS: The graduated vernier scale allows minimum interval fractions to be set up (in tenths of Nm).
IMPROVED VISIBILITY: Double graduation in Nm for clearer, simpler torque visibility and easy, prompt settings.
PUSH-THROUGH RATCHET: 72 tooth mechanism, for quick, accurate wrench operation, ensuring a take-up angle of no more than 5°.
BI-MATERIAL HANDLE: Ergonomic handle, for a safe, comfortable hold. Made from materials resistant to fuel, oil and industrial liquids.
TORQUE LOCKING PUSH-PULL SYSTEM: Lock/release knob with high-visibility red ring in released position. Torque is set by rotating the handle.
CLICK MECHANISM: The mechanical click can be heard and touched.
100% ITALIAN-MADE: Entirely designed and manufactured in Italy, assembled, tested and certified at Beta's Dynalab, at our headquarters in Sovico, which translates into top-quality torque wrenches.

A professional solution, ideal for light carpentry and maintenance jobs, the inverter welding machine, 1860BHT/160A, stands out as a first-rate item developed from the merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A.
This DC-powered inverter welding machine can be used for both MMA welding with rutilic, basic and stainless steel electrodes, and TIG steel welding.
Compact and lightweight, the welding machine supports the arc force, STICK/TIG (lift arc), hot start, anti-sticking and thermostatic protection features.


Features:
• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
35% - 160 A
60% - 130 A
100% - 95 A
• Protection: IP23S
• Usable electrodes: Ø 1.6 - 4 mm rutilic, basic, stainless steel.
• Supplied with 25 mm² cables
• Dimensions: 360x140x230 mm
• Welding machine weight: 6.2 kg
• Torch length: 4 m

Specifications:
• Maximum capacity: 1 t
• 4 loading positions: 300-600-800-1000 kg
• With load limiting valve and chrome-plated stand
• Controlled descent speed
• Nylon wheels
• Maximum height: 2420 mm

Workshop equipment Beta RSC50.
The new range of workshop equipment is characterised by attention to detail and refined finishes.

Comprehensive combination comprising:
• 1 single-door tool cabinet (RSC50 A1)
• 1 750-mm-long worktop (RSC50 PG/1-0,7MT)
• 1 2.240-mm-long worktop (RSC50 PG/3-2,2MT)
• 1 mobile roller cab with 7 drawers (RSC50 C7)
• 1 fixed module with 4 drawers (RSC50 M4)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module (RSC50 MS-AVV) with compressed air hose reel item 1900S 8x10 (included)
• 1 tool wall system with aluminium shutter and framework (RSC50 PS)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 A2)

Design and Quality Made in Italy

The new workshop equipment is designed and manufactured in Beta's Italian factories, with the utmost attention to detail and choice of quality materials. The new range comprises preassembled combinations, developed by Beta for professionals; alternatively, you can design your workplace on your own, choosing from many under-bench modules, wall-mounted cabinets and furnishing accessories.


Deep and sturdy work surface
New sturdy and very deep worktop (63 cm) for a large, comfortable and functional work surface. It can be fitted with a vice, thereby allowing heavy-duty jobs to be carried out.

Wide range of compatible assortments
The drawers in Beta’s standard dimensions (588x367 mm) can accomodate the numerous tool modules, which are available in both soft and hard versions, made from EVA and ABS respectively.

Customisable modules
The customized colours of the drawer handles and lights under the worktops and wall-mounted cabinets result in unique workshop equipment.

Simple, Quick Installation
RSC50 range’s modules have been conceived and designed so that they can be assembled intuitively and quickly. In fact, thanks to optimized production of the various parts of the range, assembly of the RSC50 equipment involves fewer steps than other lines of workshop equipment.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:

• 2 perforated tool panels (C45PRO PF)
• 2 wall-mounted cabinets (C45PRO PM)
• 2 wall brackets, wide type (C45PRO SL)
• 1 wall bracket, narrow type (C45PRO SS)
• 1 single-door cabinet (C45PRO AS1)

• Fixed module with 7 drawers and stainless steel coated MDF worktop (C45PRO M7A/X):
• 1 drawer, 1248x406 mm
• 6 drawers, 782x406 mm
5 drawers, 65 mm high
1 drawer, 145 mm high
• 1 storage compartment with intermediate shelf and door

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.


Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.


Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:
• 1 stainless steel coated MDF worktop (C45PX/3-2.0MT)
• 1 stainless steel coated MDF worktop (C45PX/2-1.3MT)
• Fixed two-door module (C45PRO MA)
• 1 mobile roller cab with 7 drawers (C45PRO C7)
• 1 fixed module with 7 drawers (C45PRO M7)
• 1 fixed module with 2 built-in reels (C45PRO ACT)
• 1 fixed service module (C45PRO MS)
• 1 self-supporting complete corner with stainless steel coated MDF worktop (C45PRO CORNER/X)
• 2 perforated tool panels (C45PRO PF)
• 1 perforated tool panel, con be fitted with a power socket (not included) (C45PRO PFE)
• 3 wall-mounted cabinets (C45PRO PM)
• 1 tool wall system with aluminium shutter (C45PRO PAS)
• 6 wall brackets, wide type (C45PRO SL)
• 4 wall brackets, narrow type (C45PRO SS)
• 2 single-door cabinets (C45PRO AS1)

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.

Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.

Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:
• Stainless steel coated MDF worktop (C45PX/3-2.0MT)
• Fixed module with 7 drawers (C45PRO M7)
• Mobile roller cab with 7 drawers (C45PRO C7)
• Fixed service module (C45PRO MS)
• 3 perforated tool panels (C45PRO PF)
• 3 wall-mounted cabinets (C45PRO PM)
• 3 wall brackets, wide type (C45PRO SL)
• 1 wall bracket, narrow type (C45PRO SS)
• Two-door tool cabinet (C45PRO AS2)

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.


Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.

Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.

Innovative thru-axle locking system.

Features:
• With support for central movement, with safety pin
• Built-in wheel truing stand
• Innovative thru-axle locking system
• Supplied with adapter sockets for most forks
• Supplied with fork connection adapter without thru-axle


Firm, safe, compact workbench for bicycle assembly and maintenance.

Innovative thru-axle locking system.
Features:
• With support for central movement, with safety pin
• Tool drawer with ball bearing slides (490x365x90 mm)
• Built-in wheel truing stand
• Innovative thru-axle locking system
• Supplied with adapter sockets for most forks
• Supplied with fork connection adapter without thru-axle


Professional workbench for bicycle assembly and maintenance.
Large tool drawer allows everything to be always within reach.
Can be used with or without wheels on bicycle.
Firm, safe top for central movement.
Its weight (45 kg) provides both firmness and sturdiness.

The IRWIN Record Pro Entry Mechanic's Vice is fully machined on all load bearing surfaces for smooth and trouble free operation. It features a safety stop to prevent the slide being separated from body and a fused handle, Acme twin start thread for smooth and fast operation and replaceable hardened steel jaws (55 HRC). Specification Clamping Force: up to 1.5 tons.Jaw Width: 100mm.Jaw Capacity: 83mm.

1 x IRWIN Record No.8 Mechanic's Vice 200mm (8in)

The IRWIN Record No.6 Mechanic's Vice has the following specification: Jaw Width: 150mm (6in).

1 x IRWIN Record No.5 Mechanics Vice 125mm (5in)

1 x IRWIN Record No.4 Mechanic's Vice 115mm (4.1/2in)

1 x IRWIN Record No.3 Mechanic Vice 100mm (4in)

The IRWIN Record No.1 Mechanic's Vice has the following specification: Jaw Width: 75mm (3in).

The Faithfull FAIVM4; Mechanic's Bench Vice; has the following specification Jaw Width: 125mm.Max Jaw Opening: 180mm.

This Mechanic's Bench Vice features a machined anvil and replaceable steel jaw plates. The ACME main thread can apply a clamping pressure of up to one ton between the jaws. A safety stop prevents the slide from being accidentally separated from the body. Specification Jaw Width: 105mm.Max Jaw Opening: 105mm.Throat Depth: 65mm.Tommy Bar Length: 150mm.Anvil Size: 30 x 40mm.Dimensions LxWxH: 290x150x140mm.Weight: 7.8kg.

These Knipex Half-Round Mechanic's Pliers are manufactured from forged vanadium electric steel that has been oil-hardened. They have 45 angled, half-round, long jaws and a spark plug cover 'grabber'. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for gripping spark plugs and round components.

These Knipex Mechanics Bent Nose Pliers are manufactured from forged Vanadium Electric Steel that has been oil-hardened. They have a 70 angled head that offers easy access to confined areas, whilst the precision, high strength half round jaws feature cross hatched knurled surfaces for ultimate gripping. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for pulling split pins and other gripping tasks in difficult to access areas.

These Knipex 38 11 Mechanics Long Nose Pliers with straight, flat-round jaws and a polished head. Made from special tool steel that has been oil hardened to give these pliers a longer working life.; Fitted with; PVC dipped handles for added comfort, durability and, most importantly, added grip. The gripping surfaces cross-hatched and knurled. The cutting edges are separately induction hardened for durability and longer working life and are hardened to approx 61HRc. The pliers; can withstand high load capacity against torsion with high bending strength of the plier jaw/tips to withstand pulling and twisting. They are specially designed for the automotive industry as they have a long reach and will access tight or restricted areas.

Norbar Pro 200 Adjustable Reversible 'Automotive' Torque Wrench 1/2in Drive 40-200Nm Part Number: 15016.Accuracy:3%Operates Between: 40-200Nm/30-150lbf ft.Square Size: 1/2in.Ratchet Teeth: 48.Ratchet Diameter: 43mm.Length: 466mm.Weight: 1.04kg.

Norbar Pro 100 Adjustable Reversible 'Automotive' Torque Wrench 1/2in Drive 20-100Nm Part Number: 15015.Accuracy:3%Operates Between: 20-100Nm/15-75lbf ft.Square Size: 1/2in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 367mm.Weight: 0.76kg.

Norbar Pro 100 Adjustable Reversible 'Automotive' Torque Wrench 3/8in Drive 20-100Nm Part Number: 15014.Accuracy:3%Operates Between: 20-100Nm/15-75lbf ft.Square Size: 3/8in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 367mm.Weight: 0.76kg.

Norbar Pro 50 Adjustable Reversible 'Automotive' Torque Wrench 1/2in Drive 10-50Nm Part Number: 15013.Accuracy:3%Operates Between: 10-50Nm/7.5-37.5lbf ft.Square Size: 1/2in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 327mm.Weight: 0.69kg.

Norbar Pro 50 Adjustable Reversible 'Automotive' Torque Wrench 3/8in Drive 10-50Nm Part Number: 15012.Accuracy:3%Operates Between: 10-50Nm/7.5-37.5lbf ft.Square Size: 3/8in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 327mm.Weight: 0.69kg.

The Bahco Mechanical Carpenter's HB Pencil requires no sharpening. It has a wide, strong lead that holds perfectly against rough materials. The angled shaped tip is ideal for precision marking when using a square. All contained within a high-impact ABS body that is rectangular shaped to avoid rolling. Replaceable lead that lasts up to 3x longer than standard pencils. Supplied with 3 leads.

The Faithfull Mechanics Pry Bar Set contains three sizes of bar to help pry, lift, position and align machinery and parts into place. Each bar has a heavy-duty square shaft with an angled tip design to provide an extra leverage point when working in narrow or confined spaces and feature a sharpened chisel tip that can be easily slid into tight spaces to separate parts. The large PVC handles provide a positive grip to help protect and keep your hands comfortable when applying a high leverage. These pry bars are useful for many small dismantling applications.

The Rapid Automotive Rivets are made from high grade aluminium to ensure a secure fix. They are zinc coloured to match licence plates on cars, vans, trailers and motorbikes. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters. Specifications:Size: 4 x 12mm.Grip range: 6-9mm.Pack: Blister of 50.

Specifications:Size: 4.8 x 16mm.Grip range: 9-12mm.Pack: Blister of 32.

Specifications:Size: 4 x 16mm.Grip range: 9-12mm.Pack: Blister of 32.