The Milwaukee M18 ONEPP2A2-502X FUEL™ Next Gen ONE-KEY™ Twin Pack, contains the following: 1 x 18V M18 ONEPD2 FUEL™ ONE-KEY™ Combi Drill with a Milwaukee designed and built brushless POWERSTATE™ motor for fast drilling through demanding applications. Its compact design provides better access to tight spaces and reducing fatigue. The all-metal ratcheting chuck provides increased bit grip strength and corrosion resistance. No Load Speed: 0-500/0-2,000/min. Impact Rate: 0-32,000/bpmMax. Torque: 135NmChuck Capacity: 13mmCapacity: Steel 16mm, Masonry 16mm, Wood 89mmWeight: 2.2kg 1 x 18V M18 ONID2 FUEL™ ONE-KEY™ 1/4in Impact Driver with a Milwaukee designed and built brushless POWERSTATE™ motor, increasing users productivity even with the most demanding fasteners on the job. The 4-Mode DRIVE CONTROL™ provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners. Bit Holder: 6.35mm (1/4in)No Load Speed: 1,900/2,800/3,600/0-3,600/min.Impact Rate: 1,200/3,400/4,300/0-4300/bpmMax. Torque: 119/176/226/0-226NmMax. Bolt Diameter: M16 Both tools come with Milwaukee ONE-KEY™ Technology. Connects via Bluetooth with the Milwaukee ONE-KEY™ app. Allows for complete tool customisation, up to 4 custom settings to the tool's memory for fast selection on the jobsite. 1 x 12-18V M12-18FC Charger that is up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M18™ and M12™ batteries, providing an upgrade for both systems. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature and charge status, to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and a Carry Case.

The Milwaukee M18 FPP2W2-602X FUEL™ Twin Pack contains the following: 1 x 18V M18 FPD2 FUEL™ Combi Drill has a Milwaukee designed and built brushless POWERSTATE™ motor for heavy application under load. Extremely compact design, only 175mm in length, for access into tight spaces. Fitted with an advanced, heavy-duty chuck that provides increased bit grip. No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-32,000/bpmMax. Torque: 135NmCapacity: Steel 16mm, Masonry 16mm, Wood 89mmWeight: 2.2kg 1 x 18V M18 CAG115XPDB 115mm FUEL™ Angle Grinder has the slimmest handle design available on the market, with a paddle switch and an anti-vibration side handle. The removable dust screen prevents debris entrance, prolonging motor life. There is a FIXTEC nut for tool-free disc change and a 115mm keyless guard. No Load Speed: 0-8,500/min.Cutting Depth: 28mmSpindle Size: M14Weight: 1.8kg 1 x 12-18V M12-18 FC Multi-Voltage Li-ion Charger, recharges all M18™, M14™ and M12™ REDLITHIUM-ION™ battery packs. It recharges in sequence: first in, first to charge - resulting in less time needed to manage charging cycles. Also supplied with: 2 x 18V 6.0Ah Li-ion Batteries and 2 x Heavy-Duty Carry Cases.

The Milwaukee M18 FPP2A2 FUEL™ Gen 3 Twin Pack , contains the following: 1 x 18V M18 FPD2 FUEL™ Combi Drill has a Milwaukee designed and built brushless POWERSTATE™ motor for heavy application under load. Extremely compact design, only 175mm in length, for access into tight spaces. Fitted with an advanced, heavy-duty chuck that provides increased bit grip. No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-32,000/bpmMax. Torque: 135NmCapacity: Steel 16mm, Masonry 16mm, Wood 89mmWeight: 2.2kg 1 x 18V M18 FID2 FUEL™ Impact Driver has a 1/4in Hex chuck for quick and easy bit change. With a Milwaukee designed and built brushless POWERSTATE™ motor for heavy application, under load. DRIVE CONTROL™ allows the user to shift into 4 different speed and torque settings to maximise application versatility. No Load Speed: 1,900/2,800/3,600/0-3,6000/min.Impact Rate: 1,200/3,400/4,300/0-4,300/bpmTorque Settings: 119/176/226/0-226NmMax. Bolt Diameter: M16 1 x 12-18V M12-18 FC Multi-Voltage Li-ion Charger recharges all M18™, M14™ and M12™ REDLITHIUM-ION™ battery packs. It recharges in sequence first in, first to charge - resulting in less time needed to manage charging cycles. Supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x Heavy-Duty Carry Case.

The Milwaukee M18 BLPP2A2 Brushless Twin Pack, contains the following: 1 x 18V M18 BLPD2 Brushless Combi Drill has a compact design that provides excellent balance and control, ideal for overhead applications or work in tight spaces. Fitted with a heavy-duty 13mm metal chuck for quick bit changes and superior bit retention. No Load Speed: 0-550/0-1,800/min. Impact Rate: 0-28,800bpmMax. Torque: 82NmChuck Capacity: 13mmCapacity: Steel 13mm, Masonry 16mm, Wood 76mmWeight: 2.1kg 1 x 18V M18 BLID2 Brushless Impact Driver with Milwaukee DRIVE CONTROL™ allows the user to shift into 3 different speed and torque settings to maximise application versatility. One-handed bit holder with retention lock. Bit Holder: 6.35mm (1/4in) Hex ChuckNo Load Speed: 1,500/3,400/0-4,200/min.Impact Rate: 1,700/2,600/0-3,400/bpmMax. Torque: 180Nm 1 x 12-18V M12-18 FC Multi-Voltage Li-ion Charger recharges all M18™, M14™ and M12™ REDLITHIUM-ION™ battery packs. It recharges in sequence first in, first to charge - resulting in less time needed to manage charging cycles. Supplied with 2 x 18V 5.0Ah Li-ion Batteries and a Kit Box.

Milwaukee M12 BPP4A-202C 4 Piece Kit, contains the following: 1 x 12V M12 BDD Sub-Compact Drill Driver is a high performance sub-compact drill driver that measures only 187mm in length making it ideal for working within confined spaces. The optimised handle provides better control and improved grip. Chuck 10mm.No Load Speed: 0-400/0-1,500/min.Max Torque: 30Nm.Capacity: Wood: 22mm, Steel: 10mm, Masonry: 10mm.Weight: 1.2kg. 1 x 12V M12 BID Sub-Compact Impact Driver is a high performance sub-compact impact driver, that measures 165mm in length making it ideal for working within confined spaces. Has a heavy-duty full metal gearbox and gears for superior durability and maximum torque. Bit Holder: 1/4in Hex.No Load Speed: 0-2,500/min.Impacts Per Min: 0-3,300/min.Max Torque: 112Nm. 1 x 12V C12 HZ Hackzall Saw measures only 280mm, making it ideal for working within confined spaces. With patented FIXTEC clamp for fast and easy keyless blade change, and a built-in LED light for work surface illumination. REDLINK™ overload protection electronics feature in both tool and battery pack for excellent durability. Strokes at No Load: 0-3,000/min.Stroke length: 13mm.Weight: 1.2kg. 1 x 12V C12 T Lamp has a 90 rotating head to aim the light at the work space. Its aluminium head is impact and weather resistant for excellent durability, and a magnetic back allows hands-free use. Voltage: 12V.Run time: up to 4 hours per charge. 1 x 12V C12 Li-ion Charger has temperature protection electronics to optimise the charger rate in extreme temperatures to extend battery life. Its encapsulated circuit board protects the electronics from dust, moisture and impact. The charger features progressive charge indication: battery LED's light up incrementally to give feedback on current charge level of battery pack. Supplied with 1 x 12V 4.0Ah Li-ion Battery, 1 x 12V 2.0Ah Li-ion Battery and a Kitbox.

The Einhell TE-TK 18 Li Drill Grinder Kit, contains the following: 1 x 18V TE-CD 18 Li Power X-Change Drill Driver has 2 functions: screwdriving and drilling. With 2 speed gearing for powerful screwdriving and fast drilling. Fitted with a high-quality, 13mm quick-change drill chuck and an LED lamp to illuminate the work area. Integrated quick-stop function for increased safety. Chuck: 13mm Single SleeveNo Load Speed: 0-350/0-1,250/min.Max. Torque: 44Nm, 20 SettingsCapacity: Concrete: 8mm 1 x 18V TE-AG 18 Li Power X-Change Angle Grinder is a very handy, compact tool and is the lightest angle grinder of its class. It has a robust aluminium gear housing and a very smooth operation thanks to the separation of motor and gearing. The modified air guidance provides better cooling and the disc guard has a quick adjust facility. The slimline design has been fitted with ergonomic soft grip surfaces and the additional handle can be fitted flexibly in 3 positions. No Load Speed: 8,500/min.Disc Diameter: 115mmMax. Cutting Depth: 28mmWeight: 1.21kg Also supplied with: 1 x 18V 1.5Ah Li-ion Battery, 1 x 18V 3.0Ah Li-ion Battery and 1 x 18V Power X-Charger System Fast Charger.

The Einhell Power-X-Change Brushless Twin Pack, contains the following: 1 x 18V TE-CD 18LI-I BL Power X-Change Combi Drill, with a brushless motor for increased performance and longer operating times. The impact mechanism provides the power needed to penetrate hard, brittle material. Fitted with a robust, long-lasting 2-speed metal gear making it ideal for heavy-duty drilling jobs. Its ergonomic, soft grip design and additional handle provide comfortable operation. Chuck: 13mm Single SleeveNo Load Speed: 0-500/0-1,800/min.Impact Rate: 0-8,000/0-28,000/bpmMax Torque: 60Nm, 22 SettingsCapacity: Concrete: 8mmWeight: 2.2kg 1 x 18V TE-CI 18 LI BL Power X-Change Impact Driver, with a brushless motor for increased performance and longer operating times. The finely adjustable electronic speed control can be precisely adjusted to your requirements, so that neither the material nor the impact driver are over strained. It short, light-weight design reduces body stress and fatigue. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,900/min.Max Torque: 180NmWeight: 1.25kg 1 x 18V Power-X-Change Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, a deeply discharged battery will be charged in repair mode). Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min Also comes with 1 x 18V 2.0Ah Power X-Change Li-ion Battery, 1 x 18V 4.0Ah Power X-Change Li-ion Battery and 1 x Tool Bag

The Einhell Power-X-Change Combi Impact Driver Twin Pack, contains the following: 1 x 18V TE-CD 18-2 Li Power X-Change Combi Drill is a powerful and versatile tool for screwdriving, drilling and hammer drilling jobs. It has a robust, long-lasting 2-speed metal gear box for high torque and torque slip coupling that prevents over tightening of screws. Chuck: 13mm Keyless.No Load Speed: 0-320/0-1350/Min.Max Torque: 48Nm 25 Settings.Capacity: Concrete: 15mm.Weight: 1.76kg. 1 x 18V TE-CI 18 Li Power X-Change Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. The special impact mechanism eliminates any torsion force on the users wrist. Short, lightweight design with ergonomic soft-grip surfaces and a rugged aluminium housing with additional rubber supports for increased protection. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,300/Min.Impact Rate: 0-3,200/bpm.Max Torque: 140Nm. 1 x 18V Power-X-Change Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, a deeply discharged battery will be charged in repair mode). Input Power: 240V.OutputVage:21V.Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min. Weight: 0.5kg. Also comes with 2 x 18V 2.0Ah Power X-Change Li-ion Batteries and 1 x Tool Bag.

The DEWALT DCZ285M2 Twin Pack, contains the following: 1 x 18V DCD785 XR Compact Hammer Drill Driver has an ultra-compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a 2-speed, all-metal transmission for increased run time and a longer tool life. Chuck: 13mm KeylessNo Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmMax. Torque: 60Nm, 14 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 38mmWeight: 1.24kg 1 x 18V DCF885M2 XR Compact Impact Driver has an ultra-compact, lightweight design for use in confined spaces. It has an improved ergonomic design and rubber grip, for increased comfort. The intelligent trigger allows for total control over all applications and there is a 6.35mm 'drop in' keyless hex driver that allows for quick, one-handed fitment of the screwdriver bit or holder. Bit Holder: 1/4in (6.35mm)No Load Speed: 2,800/minImpact Rate: 3,200/bpmMax. Torque: 155NmWeight: 1.6kg Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V Multi-Voltage XR Charger 1 x TSTAK II Kit Box.

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45 in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK™ VI Deep Toolboxes (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Carrier Base (171229)

The DEWALT DCK699M3T XR 6 Piece Kit, contains the following: 1 x 18V DCD795 Brushless Compact Combi Drill has a lightweight, compact design for use in confined spaces. With 2-speed, all-metal transmission and LED work light. Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm 1 x 18V DCF887 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm. 1 x 18V DCH253 SDS Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. Has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90: 55mm, @45: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90 vertically with ratchet lock. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Supplied with 3 x 18V 4.0Ah Li-ion Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.

The DEWALT DCK694T3 Brushless 6 Piece Kit, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. It also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 5,150 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 5,150/min.Max. Cutting Depth: @90 55mm, @45 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kg 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features XR Lithium-ion Technology and is part of the intelligent XR Lithium-ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kg 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety. Quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Stroke Length: 26mmCapacity: Wood 135mm, Metal 10mmWeight: 3.1kg 1 x 18V DCL040 XR Torch is the latest generation work light, using LED Technology. Compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED bulb produces 110 lumen output (10,000 hr life) with a 2 zone light pattern. The flashlight head pivots more than 90 vertically with a ratchet lock. Also supplied with: 3 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 1 x DCB118 Multi-Voltage Charger, 2 x DS300 TOUGHSYSTEM™ Toolboxes

The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18V DCD995 Brushless XRP Combi Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90: 55mm, @45: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90 vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM™ Toolboxes

The DEWALT DCK665P3T XR 6 Piece Compact Woodworking Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planning performance combined with extended run time. With on-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. No Load Speed: 15,000/Min.Maximum Depth of Cut: 2mm.Rebating Depth: 9mm.Planer Width: 82mm.Weight: 2.5kg. 1 x 18V DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V 165mm DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: @90: 55mm, @45: 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety and the quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm.Weight: 3.1kg. 1 x 18V XR Li-ion Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended run time and a 250-500 lumen output with broad and even beam pattern. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LED. Light Output: 250-500 lumens. Protection Class: IP54. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Slide Pack Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.

The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mmCapacity: Wood 300mm, Steel Sections Pipes 100mm, PVC 160mmWeight: 2.3kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LEDLight Output: 250-500 lumens Protection Class: IP54 Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM™ DS300 Toolboxes.

The DEWALT DCK368P3T XR Brushless 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpmMax Torque: 26/80/203NmWeight: 1.56kg 1 x 18V DCH273 Brushless XR 3 Mode SDS Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK­™ II Toolboxes.

The DEWALT DCK305P2T XR Brushless Triple Kit, contains the following: 1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger, 1 x TSTAK™ II and 1 x TSTAK™ VI Deep Toolbox.

The DEWALT DCK278P2 XR Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless.; No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54V DCB116 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4C and 40C. Also supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.

The DEWALT DCK276P2 Brushless Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK269P2 XR Twin Pack, contains the following: 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder: 1/2in Detent Pin.No Load Speed: 0-400/0-1,200/0-1,900/min.Impact Rate: 0-2,400/min.Max Torque: 950Nm, Breakaway Torque: 1,625Nm. Max Bolt Diameter: M20.Weight: 2.62kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK266D2 XR Brushless Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/3,4000/bpmTorque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm 1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Torque: 26/80/203Nm. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 2.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.

The DEWALT DCK264P2 XR Nailer Twin Pack, contains the following: 1 x 18V DCN660 Cordless XR Brushless Second Fix Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. Nail Diameter: 1.6mm.Nail Length: 32 - 63mm.Magazine Angle: 20.Magazine Capacity: 110 Nails.Weight: 2.7kg. 1 x 18V DCN692 Cordless XR Framing Nailer with two speeds to optimise the nailer for firing all lengths of nails. With brushless motor technology for excellent power and tool-free jam clearance to minimise down time. Suitable for many applications, including stud wall insulation, roofing, floor board and cladding installation etc. Nail Diameter: 2.8-3.3mm.Nail Length: 50-90mm.Magazine Capacity: up to 55 nails.Firing Mode: Bump and Sequential.Weight: 4.1kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS400 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK259M2T Brushless Twin Pack, contains the following: 1 x 18V DCD795 Brushless Compact Combi Drill with ultra compact and lightweight design for use in confined spaces. With 2-speed, all-metal transmission. LED work light for better visibility. Chuck: 13mmNo Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max. Torque: 60NmCapacity: Wood 38mm, Steel 13mm, Masonry 13mm 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hexNo Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpmMax. Torque: 165NmCapacity: Bolt M12Bare Weight: 0.96kg Also comes with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB105 Multi-Voltage XR Charger and 1 x TSTAK V Kitbox

The DEWALT DCK2532P2 XR Brushless Twin Pack contains the following: 1 x 18V DCH273 XRBrushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Masonry: 24mm, Metal: 13mm, Wood: 26mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK™ Deep Toolbox.

The DEWALT DCK218D2T XR Twin Pack, contains the following: 1 x 12V DCD716 Combi Drill is an excellent solution for sub-compact performance and power. Has a high torque output of 30Nm and can drill into masonry. 2-speed transmission ensures easy work of light application. Single clutch collar with 16 adjustable torque control settings. No Load Speed: 0-1,500/0-4,000/min.Impact Rate: 22,500/bpm.Max. Torque: 30Nm.Torque Settings: 16.Capacity: Metal: 10mm, Masonry: 8mm, Wood: 20mm. 1 x 12V DCF815 Impact Drill with all metal gearing for efficient power transmission and long life. Aluminium front housing provides greater heat dispersion increasing motor life. Parabolic switch profile allows for greater control over speed. 6.35mm 'drop in' key-less hex driver which allows for quick fitment. Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impact Rate: 3,400/min.Max. Torque: 107Nm.Capacity: Bolt M12. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x DCB113 XR Charger and 1 x TSTAK™ Toolbox.

The DEWALT DCK211D2T XR Twin Pack, contains the following: 1 x 12V DCD710 XR Sub-Compact Drill Driver with adjustable torque control for consistent screwdriving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change. All metal gearing for efficient power transmission and long tool life. Chuck: 10mmNo Load Speed: 0-400/0-1,500/min.Max Torque: 16Nm, 15 SettingsCapacity: Wood 19mm, Steel 10mmWeight: 0.91kg 1 x 12V DCF815 XR Impact Driver with all-metal gearing and aluminium front housing that provides greater heat dispersion for increased motor life. 3 LED 'Halo' Ring provides illumination of the workpiece. Bit Holder: 6.35mm (1/4in)No Load Speed: 2,450/min.Impacts Per Minute: 3,400/min.Max Torque: 107NmCapacity: Bolt M12Weight: 1.04kg Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12-18V Multi-Voltage XR Charger and 1 x TSTAK™ V Toolbox.

The DEWALT DCK2111L2T XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD706 XR Sub-Compact Combi Drill with an efficient brushless motor that gives 15% more runtime than previous generation. It is 38.5mm shorter than previous generation, allowing you to get into even smaller spaces. 15 Position adjustable torque control for consistent screw driving into a variety of materials. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpmMax. Torque: 57.5Nm, 15 SettingsCapacity: Steel 10mm, Masonry 10mm, Wood 20mmWeight: 1.2kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver is fitted with an efficient brushless motor that gives 15% more runtime than previous generation. With 3 electronic speeds allowing for greater control when working on precise applications. The Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged.The 'Drop and Load' bit holder allows for efficient one-handed operation. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger 1 x TSTAK Kit Box

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18V DCH253 3Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18V Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18V DCD785 XR Compact Combi Drill has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 2 x 18V 4.0Ah Li-ion Batteries and 1 x DWST1-71195 TSTAK™ Deep Toolbox.

The DEWALT DCK2062M2T XR Brushless Twin Pack, contains the following: 1 x 18V DCD709 XR Brushless Combi Drill has an overall head length of just 180mm, allowing you to get into the smallest of spaces. Fitted with an ergonomically designed handle for optimum comfort and control. Chuck: 13mmNo Load Speed: 0-450/0-1,650/min.Impact Rate: 0-7,650/0-28,050/bpmMax. Torque: 65Nm, 15 Settings DrillCapacity: Wood 30mm, Steel 13mm, Masonry 13mm 1 x 18V DCF809 XR Brushless Impact Driver is super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers. Fitted with an ergonomically designed handle for optimum comfort and control. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,800/min.Impact Rate: 0-32,000/bpmMax. Torque: 190Nm Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

The DEWALT DCK2033X2 XR FlexVolt Brushless Twin Pack, contains the following: 1 x 54V DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min. with 3.5 joulesCapacity: Concrete 30mm, Steel 13mm, Wood 26mmWeight 3.7kg 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3-speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11-position adjustable torque control for optimised precision when screwdriving. It also has an improved 3-position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg 1 x 18-54V DCB118 XR FlexVolt Fast Charger will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem and battery too hot or too cold conditions. It has a compact design that is wall mountable and is fan cooled so it can charge efficiently between 4C and 40C. Also supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries and 1 x TSTAK VI.

The DEWALT DCK2500P2B XR Brushless Tool Connect Twin Pack, contains the following: 1 x 18V DCD797 XR Brushless Combi Drill with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allow for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Chuck Capacity: 13mm KeylessNo Load Speed: 0-2,000/min.Impact Rate: 0-9,300/0-34,000/bpmMax. Torque Hard/Soft: 70/27NmCapacity: Wood 40mm, Metal 13mm, Masonry 13mm 1 x 18V DCF888 XR Brushless Impact Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allows for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 205Nm Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x DCB113 XR Li-ion Charger and 1 x TSTAK­™ Toolbox.